What did Steel & Tube Holdings Limited announce?
Steel & Tube Holdings Limited (NZX: STU) filed “Steel & Tube - FY26 Results” with NZX on 25 August 2026, as a full year results announcement.
- Which company?
- Steel & Tube Holdings Limited (NZX: STU)
- When was it filed?
- 25 August 2026
- Where is the original?
- NZX announcement
Steel & Tube - FY26 Results
Company Announcement
DATE
Steel & Tube Holdings Limited, PO Box 58880, Botany, Auckland 2163, New Zealand
P +64 4 570 5000 www.steelandtube.co.nz
Steel & Tube FY26 Results
Progress made despite an uneven market recovery
Steel & Tube Holdings Limited (NZX: STU) has released its audited results for the 12 months ended 30 June 2026
(FY26), reporting improved normalised earnings as increased demand and operating leverage come into play.
• Normalised results improved on prior year, however unforeseen continuing market weakness and increased
costs (primarily wages and energy) delayed the return to profitability
• Positive revenue and volume trends in line with market recovery, prior to disruption in Q4
• Significant operating leverage supporting earnings growth ahead of revenue, with a 40% increase in the
second half of financial year normalised earnings (EBIT)
• Acquisitions continue to out-perform with galvanizing business driving margin expansion
• Disciplined focus on working capital, debt management and liquidity with further initiatives underway
• Portfolio review and proposed business divestments being executed, providing pathway to simplified
business and improved return on invested capital
• Bank funding in place with ANZ facility extended to September 2027
• Board refresh in progress, in line with succession plan
CEO Mark Malpass said: “This year’s results reflect the impact of a prolonged market downturn and period of
subdued demand, which has continued for longer than anticipated. While we saw an emerging market recovery
through the first three quarters of the year, the market was once again disrupted in Q4 as a result of the Middle East
conflict and pre-election caution.
“Against this backdrop, we have remained focused on our strategy - controlling what we can control and identifying
further business improvements. The business is now leaner and more focused and the actions we have taken are
creating meaningful operating leverage. We saw this in action this year, with positive revenue and volume trends in
line with the market recovery. Margins started to expand, earnings improved and we converted modest revenue
growth into a stronger financial outcome.”
Portfolio review
In 4Q26, Steel & Tube commenced a comprehensive review to ensure capital is directed towards the highest-value
opportunities and to position Steel & Tube for sustainable growth over the medium to long-term. The review
identified opportunities to release capital and exit loss-making operations, resulting in the exit (subject to employee
consultation) of the Reinforcing & Wire, and Plate Processing operations, both of which operate in highly
competitive markets and are delivering returns below investment criteria. Value will be maximised through the sale
of assets, with proceeds used to pay down debt.
The Company has received an offer from Euro Corporation for the Reinforcing & Wire assets and has agreed to
terms with it. Any sale to Euro would be conditional on obtaining all necessary approvals, and satisfactory
engagement with the Commerce Commission. Under their offer terms, Euro would assume customer contracts and
acquire the inventory and assets. Euro would also consider affected staff for future employment opportunities.
Separately, the Company will also be conducting a marketing process for the assets over the next few months, to
ensure that the full market value of the assets is realised. The sale of the assets is expected to realise value of $11m -
$12m in asset and inventory value excluding costs.
The review also endorsed the strategic rationale behind recent acquisitions including Perry Metal Protection in May
2025. The galvanizing business has continued to outperform, with revenue and earnings trending above business
case and prior year, and cross-sell and revenue synergies also above expectations.
In addition, a review of the lease portfolio has also been completed. With the business exits noted, the company
plans to exit seven smaller sites over the next 12 months. This will lower operating costs and improve return on
capital through more efficient use of assets, and is expected to deliver annualised cash savings of approximately $2m
in FY28. Regional hubs are not affected and will continue to provide customers with a one-stop-shop. As part of the
portfolio review, the company is exploring the exit of a further two larger sites.
Financial Performance
Volumes lifted 15.9% to 115k tonnes, with revenue up 13.9% to $438.9m. Significant operating leverage is supporting
earnings growth ahead of revenue, with normalised EBITDA up 376% to $9.9m. Normalised EBIT was $(16.5)m
1
, a
22.7% improvement YoY, with a return to positive normalised EBIT for March 2026 and breakeven in May.
Margin expansion was driven by the galvanizing business and supported by the group-wide cost out programme
and freight and warehouse initiatives. Product margin increased 2.6 percentage points to 30.7%, with product margin
$/tonne of $1,167 (FY25: $1,088). Disciplined pricing, a higher value product mix and ongoing cost discipline will
deliver further earnings and margin growth as activity returns.
The third phase of the cost out programme commenced in 1H26 will deliver approximately $6m in annualised direct
and operating expense savings and had a positive FY26 impact of $3.5m.
Inventory continues to be managed prudently to ensure best use of working capital, with year-end inventory at
$111.0m (FY25: $113.6m). The number of SKUs has been reduced, with a shift to higher value, higher demand
products and active management of old, obsolete and excess inventory lines.
A priority focus has been to rebuild balance sheet capacity. M&A activity has been paused, capex restrictions are in
place and dividends are on hold. Net debt at 30 June 2026 was $48.0m, reflecting the ~$30m cash portion of the
Perry’s acquisition in May 2025. Banking arrangements with ANZ have been renewed until September 2027,
providing additional financial stability for the company.
This year’s result includes a non-cash $51.9m impairment to reflect a write down in the carrying value of Steel &
Tube’s business units (as the result of accounting assessments made at a point in time each year), as well as other
non-trading adjustments of $3.8m. After impairments and adjustments, statutory net loss after tax was $(61.2)m.
Chair Susan Paterson said: “It is disappointing to report another loss. Our focus is firmly on returning the business to
sustainable profitability and positioning it to benefit as demand recovers. We have a clear path forward, centred on
disciplined execution, stronger returns and creating long-term value for shareholders.”
1
Normalised EBIT and EBITDA exclude non-cash impairment of assets and other non-trading adjustments. Including these, EBIT was
$(72.2)m and EBITDA was $(45.8)m.
Outlook
Steel & Tube is well positioned to capture the benefits of market recovery. Although the timing and pace of this
remain uncertain, there are encouraging signs that activity across several sectors, including export and
manufacturing, is gradually improving and the company remains cautiously optimistic.
Mark commented: “FY26 proved our ability to deliver when market conditions improve and we will benefit further
from operating leverage as volumes recover. We enter FY27 as a more focused and more capable organisation than
we were at the beginning of this cycle and have a clear pathway to improving performance and returns.
“Our strategy remains unchanged – to strengthen the core and grow high value products and services. We will
continue investing in our people, strengthening customer relationships, allocating capital with discipline and
pursuing opportunities that enhance our competitive position and create sustainable shareholder value. Our
immediate priorities are to continue to strengthen the balance sheet and capture value from our initiatives.”
Ends
For media or investor enquiries, please contact: Jackie Ellis Tel: +64 27 246 2505 or
email: jackie@ellisandco.co.nz
For further information please contact:
Mark Malpass
Steel & Tube CEO
Tel: +64 27 777 0327
Email: mark.malpass@steelandtube.co.nz
Richard Smyth
Steel & Tube CFO
Tel: +64 21 646 822
Email: richard.smyth@steelandtube.co.nz
---
FY26 Results Presentation
For 12 months ended 30 June 2026
26 August 2026
FY26 Outtakes
Progress made despite disrupted market recovery
Strongly leveraged to
market recovery
•Normalised results improved on prior year, however unforeseen continuing
market weakness and increased costs (primarily wages and energy) have
delayed the return to profitability
•Positive revenue and volumes trends are emerging in line with the modest
market recovery
•NormalisedEBIT up 40% 2H26 vs 1H26
Balance sheet
discipline
•Five year investment into high-performing acquisitions
•Focus on working capital, debt management and liquidity –extended
banking facilities to September 2027
Consistent execution
through the cycle
•Strategic execution driving higher value growth, margin expansion and
greater operating efficiency
•Portfolio review in 4Q26 providing pathway to improved return on capital
•Accelerated business reset underway
FY26 Financial Summary
Operating leverage supporting earnings growth off bottom of cycle
Comparatives to prior year
FY25 volume restated to show zinc tonnes consumed in galvanizing (previously Tonnes processed). See glossary slide for more detail
Normalised Earnings Before Interest and Tax (EBIT), Normalised Earnings Before Interest, Tax, Depreciation and Amortisation (EBITDA) exclude non-cash impairment of assets of $(51.9)m and other non-trading adjustments of $(3.8)m. Including
these, EBIT was $(72.2)m and EBITDA was $(45.8)m. Non-GAAP earnings reconciliation in appendix
Net Loss After Tax (NLAT) includes impairment and non-trading adjustments
Due to rounding, numbers presented throughout this presentation may not add up precisely to the totals provided
Volume
Normalised
EBITDA
Normalised
OPEX
Product Margin
%
Inventory
▲115,261t
Up 15.9%
▲$9.9m
Up $7.7m
▲$76.3m
Increase 9.1%
▲30.7%
Increase 2.6 pp
▼$111.0m
Reduced by 2.3%
Revenue
Normalised
EBIT
NLAT
Operating Cash
Flows
Net Debt
▲$438.9m
Up 13.9%
▲$(16.5)m
Improved by $4.9m
▼$(61.2)m
Includes $(51.9)m impairment
FY25: $(24.4)m
▲$12.7m
Improved by $2.3m
▲$48m
Up from $36.3m
4
Operating
Performance
5
Jul-2017Jul-2018Jul-2019Jul-2020Jul-2021Jul-2022Jul-2023Jul-2024Jul-2025
Revenue per trading dayTonnes per trading day
Cycle turning but uneven through FY26
Positive revenue and volume trends through to Q3; slowed by Middle East conflict, cost inflation
and pre-election caution in Q4
Covid-19
IndicatorYOY Trend
As at YE 2026
Customer Enquiries
⚫
Quotes Issued
⚫
Order Conversion
⚫
Inventory Turns
⚫
Steel Pricing
⚫
Construction
⚫
Infrastructure
⚫
Manufacturing
⚫
Market cycle
Middle
East
conflict
Significant earnings improvement as market recovered
Normalised EBITDA and Normalised EBIT
•Strong improvement YoY
•Continuing momentum 1H26 to 2H26
Normalised
EBITDA
Normalised
EBIT
FY25: FY26
+376%+23%
1H25: 1H26
+40%(9)%
2H25: 2H26
+10,265%+48%
1H26: 2H26
+151%+40%
2,003
68
2,071
2,810
7,048
9,858
-
2,000
4,000
6,000
8,000
10,000
12,000
1H2HFull Year
$000s
Normalised EBITDA
FY25FY26
7
Broad exposure across key end markets
Leveraging recovery across multiple sectors
Construction
Manufacturing
Non-Residential
(Commercial)
Residential
Infrastructure
Agriculture and
other
39%
27%
18%
4%
12%
36%
31%
19%
8%
7%
FY26
Long-
term avg.
1
1
From FY22 to FY26
•Manufacturing: clear signs of emerging recovery – moved
from stagnation to expansion but with month-to-month
volatility
•Commercial: remained subdued and regionally uneven; new
project commencements remain limited
•Residential: improvement in consents, mostly for multi-unit
developments, however, building activity continues to lag
with construction volumes remaining near cyclical lows
•Infrastructure: substantial long-term pipeline supports
demand, but delivery timing and funding remain constraints,
election uncertainty being felt
•Others: economic recovery in the agricultural sector
% of sales
FY26 priorities and progress – lookback
Sustainable
earnings through
the cycle
•Broadening exposure across multiple market sectors and product offerings
•Reducing reliance on construction – although will always be an important sector
•Acquisition strategy proving itself – outperformance from Perry’s galvanizing
Cost discipline and
margin recovery
•Further $6m annualised cost out programme, optimisation of supply chain and SKUs
•Improved service + lower cost from warehouse and freight initiatives
•Focus on higher value products and services supporting margin expansion
Customer value
delivery
•Optimisation of SKUs ensuring availability of high demand, high value products
•Expanding customer share of wallet, cross-sell and capture of synergies across businesses
•Retained high levels of DIFOTIS and customer satisfaction
Rebuild balance
sheet capacity
•Renewal of ANZ banking arrangements to September 2027
•M&A activity paused, capex restrictions in place, dividends on hold
•Portfolio review to ensure capital is directed towards the highest-value opportunities
Manage working
capital
•Close control and management of cash, working capital and debtors – minimal levels of bad
debt despite increasing construction liquidations
•Actively managing inventory – cover, turns, disciplined buying strategy
9
Investment into higher value products and services
Recent acquisitions and investments providing strategic
benefit
•Kiwi Pipe & Fittings, Aluminium, Fasteners, Freight,
expanded Purlin capacity
•Plate processing returns below investment criteria –
planned exit in FY27
Perry Metal Protection continues to outperform
•Meaningful cross-sell and revenue synergies above
expectations
•FY EBIT* +30% on business case, exceeded PY EBIT* by
$1.1m
•Margin expansion expected as volumes grow
•Providing consistent earnings through the cycle
*EBIT excludes corporate levy and IFRS 16.
May-25
Jun-25
Jul-25
Aug-25
Sep-25
Oct-25
Nov-25
Dec-25
Jan-26
Feb-26
Mar-26
Apr-26
May-26
Jun-26
PMP Revenue Trending
Actual
Business case
May-25
Jun-25
Jul-25
Aug-25
Sep-25
Oct-25
Nov-25
Dec-25
Jan-26
Feb-26
Mar-26
Apr-26
May-26
Jun-26
PMP EBIT* Trending
Actual
Business case
10
Strengthening the core through the cycle
Leaner, stronger and more efficient business
Strategic FocusMeasurement
Best in class customer service•NPS 40 – in line with prior year
•Recognised for specialist capability and technical expertise
Cross sell products and services•72% of customers buying from multiple product categories
Accelerate shift to digital sales•12% of active customers purchasing digitally
Drive gross margin $/tonne•Increase 3.6% YoY – driven by high value products and services,
despite increased steel pricing
Operating efficiency•Automation, productivity and manufacturing improvements
•Lower structural cost base
•Continue to optimise network footprint
Smarter business•Investment in digital and data – exploring further AI capabilities
•Focus on sectors where we can create sustainable advantage
11
Portfolio
Review
12
Comprehensive portfolio review
Directing capital to the highest-value opportunities
•Assessment of product and service portfolio against investment
criteria
•Priority focus on enhancing capital allocation and returns
•Accelerate strategy to invest in high value products and services
– build on success of acquisitions and organic growth to date
•Adaptation of business model to deliver smarter, more profitable
ways of servicing customers
•Portfolio review supported by expert, independent advice
Actions Underway
•Exit Reinforcing & Wire (consultation phase)
•Exit Plate Processing (consultation phase)
•Lease portfolio review: exit of 7 sites in FY27
Assessment criteria
Financial returns
Sector attractiveness
Market Structure
Customer valueproposition
Strategic fit
Capital intensity
Barriers to entry
Scalability
Risk profile
13
FY26
Financial
Results
14
Group financial summary
•Relentless focus on financial discipline delivering
measurable improvement
•Significant operating leverage supporting
earnings growth ahead of revenue
•Annualised $6m cost out programme
commenced, FY26 benefit of ~$3.5m
•Meaningful uplift in Normalised EBITDA
•No dividend declared
•$51.9m impairment losses recognised in
reported figures
2
Financial
performance
1.Normalised EBITDA and EBIT have been adjusted to exclude impairment and non-trading adjustments. Further details included in appendix to this presentation
2.See Note C2 in Financial Statements
$mFY26FY25Var
Revenue
438.9385.413.9%
▲
Volume (Ktonnes)
115.399.515.9%
▲
PM$/tonne
1,1671,0887.3%
▲
EBITDA
(45.8)(2.5)(1,732.0)%
▼
Normalised EBITDA
1
9.92.1375.9%
▲
EBIT
(72.2)(26.0)(177.7)%
▼
Normalised EBIT
1
(16.5)(21.4)22.7%
▲
NLAT
(61.2)(24.4)(151.0)%
▼
Net Operating cash
flow
12.710.4
22.1%
▲
15
Revenue
Increasing demand as recovery gained momentum Q1 to Q3
300
400
500
600
1,200
1,400
1,600
1,800
2,000
Tonnes
Revenue $ (000s)
Revenue & Tonnes per Trading Day
RevenueTonnes
2,000
3,000
4,000
-
100
200
300
400
500
600
700
FY22FY23FY24FY25FY26
Average Selling Price ($/t)
Sales ($m)
Sales & Average Selling Price
RevenueAverage Selling Price
•Improving quarterly trend Q1 to Q3, tempered by
impact of Middle East conflict and pre-election
caution in Q4
•1H26 vs pcp: increase in revenue and tonnes per
day, lift in product margins
•2H26: revenue and tonnes per day ahead of pcp,
and ahead of the first half performance – margins
down slightly due to product mix and cost
inflation
•Average selling price reflects increasing price
pressure, supported by diversification into
galvanizing sector
•Maintaining market share
16
•Product margin % up 2.6pp YoY
•Product margin $/tonne increased 15.8% YoY
•GM$/Tonne increased 3.7% YoY
•Margin expansion driven by diversification into
Galvanizing sector offsetting base business margin
decline
•Supported by cost programme and freight and
warehouse initiatives
•Disciplined pricing + higher value product mix +
leaner operating platform will deliver earnings and
margin growth when volumes recover
Product margins
Operating leverage coming into play –
earnings will recover faster than revenue
Product Margin includes freight and excludes direct and sub-contract labour
1
Tonnes include zinc tonnes consumed in galvanizing. Consistent with other industry participants $ per tonne includes owned tonnes only
177
167
143
108
135
FY22FY23FY24FY25FY26
Product Margin ($m)
29.5%
28.4%
29.8%
28.1%
30.7%
1,057
1,142
1,238
1,088
1,167
FY22FY23FY24FY25FY26
Product Margin % and $/tonne
1
Product Margin %PM$/Tonne
17
Normalised operating expenses
Third wave of cost out programme underway
•Accelerated cost savings needed to
combat inflationary pressures
•7% of FY26 normalised OPEX relates to
the Galvanizing division
•Excluding Perry’s, cost up 2% YoY due
to inflation and non-recurring credits
in FY25
•Locked in $3m annualised OPEX
benefit from FY27
FY26 Normalised OPEX excludes restructuring costs of $1.4m, capital & strategic review costs of $0.5m, acquisition & integration costs of $0.3m and the $2.2m impact of
SaaS, as well as non-trading adjustments previously reported, Normalised OPEX excludes D&A
*Inflation of 4.1% as reported by Statistics NZ in their June 2026 release
69.9
4.9
1.0 75.7
2.9
(2.3)
76.3
FY25
Normalised OPEX
Galvanizing Division
Non-recurring
credits
Restated FY25
Normalised OPEX
Estimated inflation*
Net cost savings
FY26
Normalised OPEX
$m
35
45
55
65
75
85
95
NormalisedOPEX Bridge: FY25 to FY26
18
Normalised EBITDA
Growth investments and opex savings supporting increased earnings
•376% improvement from $2.1m to $9.9m
•Positive contribution from new growth
investments and strategic focus on
higher value products and services
•Base business margin decline driven by
intense market competition and product
mix
Normalised EBITDA has been adjusted to exclude impairment and non-trading adjustments.
Further details included in appendix to this presentation.
*Growth investments includes EBITDA generated from the day-to-day operations of Galvanizing, Aluminium, Kiwi Pipe, Plate Processing and Group Freight
**Inflation of 4.1% as reported by Statistics NZ in their June 2026 release
2.1
6.3
17.5
(12.6)
(1.6)
(2.4)
0.9
(0.3)
9.9
$m
0
5
10
15
20
25
30
35
Normalised EBITDA Bridge FY25 to FY26
19
$mFY26FY25Var
Trade and other receivables67.263.2 4.0
Inventories111.0113.6 (2.6)
Trade and other payables(81.0)(61.7)(19.3)
Working Capital97.2115.2 (18.0)
Total Facility
80.080.0 -
Borrowings
(60.0)(50.0) (10.0)
Available Facility/Undrawn
20.030.0 (10.0)
Cash and cash equivalents12.013.7 (1.7)
Borrowings(60.0)(50.0) (10.0)
Net Cash/(Debt)(48.0)(36.3) (11.7)
Net Tangible Assets (NTA) 74.1127.7 (53.6)
Funds Employed282.2338.0(55.9)
Balance sheet summary
Capital management remains priority,
focus on rebuilding balance sheet
capacity
•Borrowings reflect Perry’s acquisition in
May 2025
•Extended ANZ facility to September 2027
Capital management initiatives:
•Tight control of cashflow
•Inventory management and rationalisation
•Network optimisation/site consolidations
•Improved supplier terms
•Portfolio Review
20
•Net operating cash $12.7m
•Focus on cash conversion and margin
discipline
•Tight working capital management –
inventory, receivables, payables
•Cashflow initiatives taken:
-M&A paused
-Capex restrictions in place
-Third wave cost reduction
-Dividends on hold
Cashflow and Net Debt
Staying the course, disciplined cashflow management
(36.3)
6.1
(6.3)
(24.9)
2.6
10.8
(48.0)
Opening
Net Cash/(Debt)
EBITDA
excl. non-cash
impairment
Net Capex
payments
Lease
payments
Decrease in
inventory
Other working
capital
Closing
Net Cash/(Debt)
$m
0
(10)
(20)
(30)
(40)
(50)
(60)
(70)
Cash Flow Bridge: FY25 to FY26
21
Inventory
•Investment in high-quality, high margin
inventory items
•Reduced from 23k to ~13k planned SKUs over
two year period (FY24 to FY26)
•Actively managing discontinued inventory
lines
•Reduced slow-moving and obsolete inventory
by $3.9m in FY26
•Netstock inventory system fully implemented,
creating better availability for the products
that matter most to our customers
-
0.5
1.0
1.5
2.0
2.5
3.0
3.5
100
105
110
115
120
125
FY24FY25FY26
Stock turns
$m
Inventory turnover
InventoryStock turns
-
5,000
10,000
15,000
20,000
25,000
FY24FY25FY26
Number of planned SKUs
22
Moving
forward
23
Market Drivers
Manufacturing
Non-Residential
(Commercial)
Residential
Infrastructure
Other
Improving pipeline, with a lag before
volumes recover
Limited near-term visibility and
cautious project commitments
Positive momentum, but volatile and
exposed to input-cost pressures
Relatively resilient, but dependent on
funding and project timing
FY27 Outlook
Highly leveraged for domestic
market recovery, timing and pace
remains uncertain
•Q2 & Q3 FY26 showed ability to
deliver when market conditions
improve
•Cautious outlook, dependent on
macro conditions, some early
recovery being seen
•General election and Middle East
conflict has delayed customer activity
and investment decisions
•Price increases implemented in late
FY26 are holding
•Rollout of Portfolio Review actions
focused on improving ROIC
Strong rural sector
24
Key Priorities
Implemented
Disciplined control
Customer share of wallet growth
embedded
Tight focus on customer value
(differentiated service, pricing
and product availability)
Effective integration and value
capture from acquisitions
M&A activity paused, capex
restrictions and dividends on
hold
Cost discipline – recent third
wave of cost out initiatives
(includes 60 roles)
Short term
Optimise the recovery
Portfolio and business reset – exit
loss making operations
Priority focus on balance sheet
management
Cost discipline and margin growth
initiatives
Value capture from recent initiatives
and acquisitions
Build on strategic customer alliances
and share of wallet
Medium term
Return to growth
oBenefit realisation from
growth initiatives:
oM&A
oShare of wallet
oInvestment in higher
value products and
services
oReduce debt
oRecommence dividends
oRe-engage M&A activity
25
Key strengths
One of New Zealand’s largest and leading providers of steel solutions,
operating in market with strong long-term drivers
Outlook improving
•Signs of an improving outlook are beginning to emerge
Positioned for the
upswing
•Diversified exposure to end markets
•Broad range of in-demand steel products and solutions
•National reach and technical capability
•Long standing customer relationships and trust
•Strong brand recognition
Disciplined cost and
capital management
•Strong capital discipline and tight management of working capital and costs
•Highly leveraged to market recovery
Disciplined strategic
execution
•Strengthen the core and grow high value products and services
Discussion
27
Appendix
28
Non-GAAP financial information
Non-GAAP financial information: Steel & Tube uses several non-GAAP
measures when discussing financial performance. These include
Normalised EBITDA, Normalised EBIT and Working Capital. Management
believes that these measures provide useful information on the underlying
performance of Steel & Tube’s business. They may be used internally to
evaluate performance, analyse trends and allocate resources. Non-GAAP
financial measures should not be viewed in isolation nor considered as a
substitute for measures reported in accordance with NZ IFRS.
Non-trading adjustments/Unusual transactions: The financial results for
FY26 include transactions considered to be non-trading in either their
nature or size. Unusual transactions can be as a result of specific events or
circumstances or major acquisitions, disposals or divestments that are not
expected to occur frequently. Excluding these transactions from
normalised earnings can assist users in forming a view of the underlying
performance of the group. The above reconciliation is intended to assist
readers to understand how the earnings reported in the periods ended 30
June 2026 and 30 June 2025 reconcile to normalised earnings. Non-
trading adjustments of $(55.7) million are included in the FY26 EBIT &
EBITDA.
Period ended 30 JuneEBITDAEBIT
$000s
FY26FY25FY26FY25
Reported (45,815)(2,496)(72,201)(25,953)
Palletised warehouse project costs-1,364 -1,364
Business restructuring costs1,379699 1,379699
Acquisition and integration expenses296903 296903
Software as a Service (SaaS) expenditure2,1741,601 2,1741,601
Capital & strategic review costs489- 489-
Asset impairment charge51,866-51,866-
Fair value (gain)/loss on contingent consideration(532)-(532)-
Normalised9,8572,071(16,529)(21,386)
29
Strategic pathways
Overall goal to deliver gross margin improvement
•Best-in-class customer experience
•Cross sell products and services
•Accelerate shift to digital sales
•Drive gross margin $/tonne
•Operating efficiency
•Smart business
Continue to Strengthen the Core
•High value products, diversified
materials and value-added services
•Diversify customer segments and build
scale
•Primary focus is on organic investment
and M&A in directly adjacent sectors
Grow High Value Products and
Services
30
Customer, employee and sustainability update
1.13
1.14
0
3.5
3.43
0
1
2
3
4
5
FY22FY23FY24FY25FY26
Employee Satisfaction (eNPS
2
)
Employee Safety Measure (TRIFR
1
)
Emissions kgCO
2
e per tonne
3,4
40
42
50
42
40
0
20
40
60
FY22FY23FY24FY25FY26
1.TRIFR: Employee Total Recordable Injury Frequency Rate
2.Net Promoter Score (NPS): Measure of customer/employee satisfaction
3.Reporting references the Greenhouse Gas Protocol and includes all material emissions under Scope 1 and 2, with Scope 3, except purchased goods and services and employee commute
4.FY25 emissions do not include the Galvanizing operations, FY26 emissions excluding Galvanizing were 113kgCO2e
Customer Satisfaction (NPS
2
)
•Customer satisfaction remains at high
levels due to our focus on making life
easy for customers, offering best-in-class
customer experience and solutions
•Safety outcomes are positive, remain
focused on zero harm
•Employee satisfaction remains close to
the top quartile – emphasis on safety,
wellbeing and culture
35
29
31
32
30
0
10
20
30
40
Mar-23Dec-23May-24Jun-25Feb-26
eNPSTop Quartile
104
92
111
118
129
80
90
100
110
120
130
140
FY22FY23FY24FY25FY26
kgCO2
-
e (000s)
31
Our business divisions
Distribution
Products sourced from preferred steel
mills and distributed through our
national network
Processing (including Galvanizing)
Products processed before sale, typically on a contract
or project basis, including onsite installation services
SteelPiping SystemsChain & Rigging
FasteningsRural ProductsStainless Steel
Sandblasting
Grating
Galvanizing
RoofingCoil ProcessingReinforcing
PurlinsComFlor/CFDLMesh
32
Business performance
FY25 volume restated to show zinc tonnes consumed in galvanizing (previously Tonnes processed)
*Gross Margin includes freight, direct and sub-contract labour
**Processing is the Processing and Galvanizing segments combined. Full year contribution from Perry Metal Protection following settlement of acquisition on 1 May 2025
DistributionFY26FY25
% of Group revenue55.2%59.4%
Revenue ($m)242.2228.9
Gross Margin*17.0%17.4%
Gross Margin $/tonne600653
Processing**FY26FY25
% of Group revenue44.8%40.6%
Revenue ($m)196.7156.5
Gross Margin*22.5%20.1%
Gross Margin $/tonne955820
•Subdued demand for most of the year, some
recovery in certain sectors and regions
•Positive revenue growth offset by increasing costs
•Customer satisfaction remains high
•Demand for aluminium continues to grow rapidly
•Fasteners, stainless and engineering steels back in
growth mode
•Volumes lifted YoY with varied demand across
product categories
•Mesh and Reo – low margin, sustained pricing
pressure in a crowded market
•CFDL/Comflor – project pipeline driving growth
•Improving demand for Coil and Purlins
•Roofing remains challenging in a competitive
market
•Galvanizing bolstering margin/tonne
33
Glossary of terms
EBIT: Earnings / (Loss) before the deduction of interest and
tax. This is calculated as profit for the period before net
interest costs and tax
EBITDA: Earnings / (Loss) before the deduction of interest,
tax, depreciation and amortisation. This is calculated as
profit for the period before net interest costs, tax,
depreciation and amortisation
Normalised EBIT/EBITDA: This means EBIT and EBITDA
excluding non-trading adjustments and unusual
transactions
eNPS: Employee Net Promoter Score – assists in measuring
employee satisfaction and loyalty within the organisation
NPS: Net Promoter Score – assists in measuring customer
satisfaction and loyalty
Tonnes: Represents tonnes sold by Distribution,
Rollforming and Reinforcing and zinc tonnes consumed in
the galvanizing process
TRIFR: Employee Total Recordable Injury Frequency Rate –
an important metric to assess safety performance
Working Capital: This means the net position after
Current Liabilities are deducted from Current Assets.
The major individual components of Working Capital for
the group are Inventories, Trade and other receivables and
Trade and other payables. How the group manages these
has an impact on operating cash flow and borrowings
34
•This presentation has been prepared by Steel & Tube Holdings
Limited (“STU”).The information in this presentation is of a general
nature only. It is not a complete description of STU.
•This presentation is not a recommendation or offer of financial
products for subscription, purchase or sale, or an invitation or
solicitation for such offers.
•This presentation is not intended as investment, financial or
other advice and must not be relied on by any prospective
investor.It does not take into account any prospective investor’s
objectives, financial situation, circumstances or needs, and does not
purport to contain all the information that a prospective investor
may require. Any person who is considering an investment in STU
securities should obtain independent professional advice prior to
making an investment decision, and should make any investment
decision having regard to that person’s own objectives, financial
situation, circumstances and needs.
•Past performance information contained in this presentation
should not be relied upon (and is not) an indication of future
performance.This presentation may also contain forward looking
statements with respect to the financial condition, results of
operations and business, and business strategy of STU. Information
about the future, by its nature, involves inherent risks and
uncertainties. Accordingly, nothing in this presentation is a promise
or representation as to the future or a promise or representation that
a transaction or outcome referred to in this presentation will proceed
or occur on the basis described in this presentation. Statements or
assumptions in this presentation as to future matters may prove to
be incorrect.
•Several financial measures are used in this presentation and should
not be considered in isolation from, or as a substitute for, the
information provided in STU’s financial statements available at
www.steelandtube.co.nz.
•STU and its related companies and their respective directors,
employees and representatives make no representation or warranty
of any nature (including as to accuracy or completeness) in respect
of this presentation and will have no liability (including for
negligence) for any errors in or omissions from, or for any loss
(whether foreseeable or not) arising in connection with the use of or
reliance on, information in this presentation.
Disclaimer
---
Results announcement
(for Equity Security issuer/Equity and Debt Security
issuer)
Updated as at March 2025
Results for announcement to the market
Name of issuer Steel & Tube Holdings Limited
Reporting Period 12 months to 30 June 2026
Previous Reporting Period 12 months to 30 June 2025
Currency NZD
Amount (000s) Percentage change
Revenue from continuing
operations
$438,864 13.9%
Total Revenue $438,864 13.9%
Net profit/(loss) from
continuing operations
$(61,181) (151.1%)
Total net profit/(loss) $(61,181) (151.1%)
Final Dividend
Amount per Quoted Equity
Security
n/a
Imputed amount per Quoted
Equity Security
n/a
Record Date n/a
Dividend Payment Date n/a
Current period Prior comparable period
Net tangible assets per
Quoted Equity Security (in
dollars and cents per
security)
$0.40*
* includes the impact of
$51.9m of asset impairments
$0.70
A brief explanation of any of
the figures above necessary
to enable the figures to be
understood
Steel & Tube uses several non-GAAP measures when
discussing financial performance. This includes normalised
EBITDA and normalised EBIT. Management believes that these
measures provide useful information on the underlying
performance of Steel & Tube’s business. They may be used
internally to evaluate performance, analyse trends and allocate
resources. Non-GAAP financial measures should not be viewed
in isolation nor considered as a substitute for measures reported
in accordance with NZ IFRS. Reconciliations of non-GAAP
measures to GAAP measures are detailed within this
announcement.
Steel & Tube’s normalised EBITDA is $9.9m for FY26 (FY25:
$2.1m, 375.9% increase) and normalised EBIT is $(16.5)m for
FY26 (FY25: $(21.4)m, 22.7% increase). Further details on the
unusual transactions/non-trading adjustments are included in the
investor presentation for the year ended 30 June 2026.
Definitions:
• EBITDA: this means earnings before interest, tax,
depreciation and amortisation and is calculated as profit for
the period before net finance costs, tax, depreciation and
amortisation
• Normalised EBITDA: this means EBITDA after normalisation
adjustments
• EBIT: this means earnings before interest and tax and is
calculated as profit for the period before net finance costs
and tax
• Normalised EBIT: this means EBIT after normalisation
adjustments
• Normalisation adjustments: these are transactions that are
unusual by size or nature in a particular accounting period.
Excluding these transactions can assist users in forming a
view of the underlying performance of the group. Unusual
transactions can be as a result of specific events or
circumstances or major acquisitions, disposals or
divestments that are not expected to occur frequently
Authority for this announcement
Name of person
authorised
to make this announcement
Mark Malpass
Contact person for this
announcement
Mark Malpass
Contact phone number +64 27 777 0327
Contact email address mark.malpass@steelandtube.co.nz
Date of release through MAP
26 August 2026
Audited financial statements accompany this announcement.
---
STEEL & TUBE HOLDINGS LIMITED
2026
ANNUAL
REPORT
Set on one of Tauranga’s most prominent waterfront corners, this seven-storey development at 2 Devonport Road,
Tauranga is a flagship $80 million project contributing to the transformation of the city’s CBD. Steel & Tube supplied
both reinforcing and ComFlor® composite floor decking as a single solution, bringing different capabilities together
under one project and making a complex build more manageable and efficient.
BUILDING
NEW ZEALAND
Steel & Tube is one of New Zealand's leading steel distributors,
processors and manufacturers, providing the products, expertise
and technical capability that help keep the country's infrastructure,
construction, manufacturing and industrial sectors moving.
Our nationwide network and
specialist businesses enable us to
support customers of every size,
from everyday steel requirements to
some of New Zealand's most complex
projects.
Whether sourcing globally,
manufacturing locally, processing
steel to specification or delivering
directly to site, we provide integrated
solutions that make life easier for our
customers.
We offer one of New Zealand's most
comprehensive ranges of steel and
related products, complemented by
value-added services.
By combining national scale with local
expertise, we create opportunities
to deliver more for our customers,
deepen long-term relationships and
grow across multiple sectors.
Behind every solution is a team
of knowledgeable, passionate
people whose technical expertise,
customer focus and commitment to
quality have earned Steel & Tube its
reputation as a trusted partner for
more than 70 years.
3Steel & Tube Annual Report 2026
2026 ANNUAL
REPORT
This year’s result reflects the impact of a prolonged market
downturn and period of subdued demand, which has
continued for longer than anticipated.
Over the past few years, we have maintained a strong focus
on the factors within our control, reducing costs while
protecting core capability.
This year, as the economic recovery was further delayed,
we have accelerated cost and efficiency initiatives
alongside a portfolio review and broader business reset,
focused on improving returns and building a stronger
platform for the future.
This report provides an overview of the actions we are
taking to position the business for long-term success.
It also demonstrates why we remain firm in our belief in
Steel & Tube's future as one of New Zealand's leading steel
solutions businesses.
FY26 tested businesses across many sectors, with improving
market conditions interrupted by ongoing economic
uncertainty and subdued customer activity.
Through it all, Steel & Tube remained focused on what
it does best – supporting customers, maintaining good
supply chains, improving productivity, and investing in less
cyclical businesses, technology and our people.
Susan Paterson | Chair Mark Malpass | CEO
This report was approved by the Board on 25 August 2026.
This Annual Report and Financial Statements of Steel & Tube Holdings Limited are prepared in accordance with the New Zealand International Financial Reporting Standards, NZX
Listing Rules and Corporate Governance Code and Companies Act 1993. The Annual Report contains certain forward-looking statements with respect to the Company’s financial
position and operational results. This involves a degree of risk and uncertainty because they relate to events and depend on circumstances that may or may not occur in the future.
Because of this uncertainty, all forward-looking statements have not been reviewed or reported on by our auditor. Due to rounding, numbers presented throughout the financial
statements may not add up precisely to the totals provided.
Our Business
About Us 5
Our Strategic Roadmap 7
FY26 Review
Chair and CEO’s Report 9
Business Performance 13
Distribution 14
Rollforming 16
Galvanizing 17
Reinforcing 19
What Matters
Customer First 22
Creating a Successful and Resilient Business 23
Committed to Health, Safety, Quality
and Environment 24
A Winning Team and Positive Community Impact 26
Board and Leadership 30
Financials and Other Disclosures
Financial Measures 34
5 Year Financial Performance 35
Consolidated Financial Statements 37
Notes to the Consolidated Financial Statements 44
Independent Auditor’s Report 77
Corporate Governance Report 81
Remuneration 93
Disclosures 97
Shareholder Information 100
Directory & Glossary 101
Steel & Tube Annual Report 20264
Approx. 13,000 planned products
supporting the manufacturing, construction,
rural, distribution and infrastructure sectors
~ 13,000-plus active customers from large
scale enterprise businesses to SMEs, across
New Zealand’s regional and urban centres
A national network of stores,
warehouse hubs and offices
~ 900 team members
Includes 102 Galvanizing employees
and 45 truck drivers
115,261 tonnes of steel sold in FY26
Employee engagement score (NPS) 30
Customer recommendation score (NPS)
1
40
Safety TRIFR
2
3.43
OUR BUSINESS
1DUNEDIN
1TIMARU
1
PALMERSTON NORTH
1NEW PLYMOUTH
2INVERCARGILL
1NELSON
5WELLINGTON
AUCKLAND
HAWKES BAY
4
TAURANGA
3CHRISTCHURCH
1
WHANGAREI
1
HAMILTON
5
9
1
Net Promoter Score. Customer NPS is calculated based
on 3 months rolling average
2
TRIFR: Employee Total Recordable Injury Frequency Rate
Prior to site
consolidations
OUR STRATEGIC ROADMAP
CORE STRENGTH
We’re harnessing our strong foundations to deliver
outstanding customer experiences, operational excellence
and sustained financial performance.
With a broad product range, nationwide reach, leading
digital capabilities and a skilled team, we’re positioned to
be New Zealand’s steel solutions partner of choice.
Sustainability is core to our journey – shaping our actions
through environmental responsibility, ethical sourcing and
a focus on reducing our carbon footprint.
Best-in-class customer experience
Cross sell products and services
Accelerate shift to digital sales
Drive gross margin $/tonne
Operating efficiency
Smart business
OUR STRATEGY
Our strategy is grounded in purpose and powered by action – building a diversified and
resilient business while capitalising on new avenues of growth.
GROWTH OF HIGH VALUE
PRODUCTS AND SERVICES
We’re growing our business by expanding our offering and
investing in innovative products and services that deliver
real value to our customers.
While organic growth remains our preferred focus, we’re
open to exploring strategic opportunities in adjacent
sectors, where they align with our vision and create
meaningful synergies.
By harnessing our deep industry expertise, strong
customer relationships and market insight, we’ll continue
to identify and seize the opportunities that drive
sustainable growth.
High value products, diversified materials
and value-added services
Diversify customer segments and build
scale
Primary focus is on organic investment and
M&A in directly adjacent sectors
Steel & Tube Annual Report 20266
OUR STRATEGIC ROADMAP
STRATEGIC GOALS
CUSTOMER Preferred supplier for steel solutions and products
SHAREHOLDER Deliver increasing value and returns for our shareholders
GROWTH Increase value through organic growth and M&A
SUSTAINABILITY Positive outcomes for our business, our people, our
communities and our planet
OUR PURPOSE
TO MAKE LIFE EASIER FOR
OUR CUSTOMERS
W H AT M AT T E R S
+ Creating a Successful and Resilient Business
+ Committed to Health, Safety, Quality and Environment
+ A Winning Team and Positive Community Impact
+ Customer First
OUR VALUES
We Are Brave
We Care
We Have Respect
Steel & Tube Annual Report 20267
Revenue
$438.9m
Up 1 3 .9%
Product Margin %
30.7%
Increase 2.6pp
Normalised EBITDA
3
$9.9m
U p $ 7. 7m
Normalised EBIT
3
$(16. 5)m
Improved by $4.9m
Net Loss After Tax
4
$(61.2)m
Includes non-cash
impairments and
adjustments of $(55.7)m
Net Debt
$48.0m
FY25 $36.3m
PERFORMANCE SNAPSHOT
3
Excludes non-cash impairment of assets of $(51.9)m and other non-trading adjustments of $(3.8)m. Including these, EBIT was $(72.2)m and EBITDA was $(45.8)m.
4
Includes impairment and non-trading adjustments.
Comparatives to prior year (FY25 includes two months of Galvanizing results)
Operating leverage supporting
earnings growth off bottom
of cycle
Focused execution of strategy
driving higher value growth,
margin expansion and greater
operating efficiency
Acquisitions continue to
outperform
Disciplined focus on working
capital, debt management and
liquidity
Extended banking facilities to
September 2027
Portfolio review and proposed
business exits providing pathway to
simplified business and improved
return on invested capital
FY26 proved Steel & Tube’s ability to deliver when the economic cycle improves
Steel & Tube Annual Report 20268
We are taking decisive steps to build a simpler, stronger business, strengthen returns and
capture the benefits of market recovery.
Tēnā koutou
As a cyclical business, our performance is inevitably
influenced by market conditions. This year’s result
reflects an extended period of market weakness with
an emerging, but uneven, recovery from the bottom of
the cycle. After initially focusing on reducing costs while
protecting organisational muscle, we are now undertaking
a significant reset to simplify the portfolio, improve returns
and position the business for recovery.
The start to FY26 was encouraging and demonstrated the
value of our strengthened operating leverage. As early
signs of recovery began to emerge in the New Zealand
economy, enquiry levels lifted, forward orders improved,
and customer sentiment showed some recovery.
The improving trend continued through to Q3 of Steel
& Tube’s financial year, with the company delivering
increasing revenue and volumes, a return to positive
normalised earnings (EBIT) for March 2026 and breakeven
in May. Gross margin improved, supported by structural
changes embedded over recent periods, including cost
disciplines, operational efficiencies and a continued focus
on higher value products and services.
However, as the year progressed, renewed geopolitical
uncertainty, cost inflation, pre-election uncertainty and
persistent caution among customers disrupted what had
appeared to be the early stages of recovery. Against this
backdrop, we have remained focused on our strategy and
controlling what we can control.
We have made good progress reducing costs while
retaining key capability, and are now taking more
significant steps to simplify the portfolio, strengthen the
business and position it for the opportunities ahead.
As customer needs and markets continue to evolve, we are
also looking ahead at how our business models can further
adapt AI and other technology to deliver smarter, more
profitable ways of serving our customers while creating
lasting value for shareholders.
Building sustainable earnings through the cycle remains
the core focus of operational and strategic decisions,
alongside rebuilding balance sheet capacity, managing
working capital and margin recovery.
Delivering Through the Cycle
Steel markets have always been cyclical. Our focus is on
ensuring Steel & Tube is ready to outperform when the
recovery arrives.
Over the past several years, we have taken decisive action
to reshape the business, strengthen our operating model
and build sustainable earnings streams. As volumes return,
we expect the structural improvements made over recent
years to translate into stronger financial performance.
We saw this in action this year, with positive revenue and
volume trends in line with the market recovery. Operating
leverage initiatives supported gross margin as volumes
lifted, with the cost base further reduced and increasing
manufacturing efficiency and productivity.
Portfolio review
In 4Q26, we commenced a comprehensive review to
ensure capital is directed towards the highest-value
opportunities. We have assessed our current portfolio
against clear investment criteria and prioritised products,
services and markets where we can create the greatest
value. We have also considered new opportunities that
offer strong returns, sustainable competitive advantages
and long-term growth.
The acquisition of Perry Metal Protection in May 2025
was a demonstration of our strategy in action, expanding
our customer offering and strengthening our position in
higher-value market segments. Perry’s has quickly become
one of our highest performing businesses and is delivering
the strategic benefits and results we anticipated.
CHAIR AND CEO’S REPORT
Steel & Tube Annual Report 20269
As well as confirming the areas where our recent
investments are delivering value and where we see further
growth potential, the review has also identified those
businesses that no longer meet our investment criteria.
As such, we are exiting (subject to employee consultation)
both our reinforcing and wire business, and plate
processing operations.
Even with market leading specialist support, outstanding
talent and excellent service, the competitive dynamics in
the reinforcing and wire market and prolonged low activity
across the construction sector, has continued to see
returns below the value needed for a sustainably profitable
operation.
Plate processing has been one of the outliers of our
strategic growth initiatives and despite earlier success,
the returns from our investment have been below
expectations, due to extensive competitor pressure.
Our priority is to maximise the value of both these
businesses through the sale of assets.
We have also reviewed our leased sites and, with the
portfolio changes noted, plan to exit two larger sites in
addition to seven smaller sites over the next 12 months.
This will reduce operating costs and improve returns
through more efficient use of asset base. Our regional
hubs are not affected and will continue to provide our
customers with a one-stop-shop.
Financial Discipline
Maintaining financial strength remains central to our
strategy, and a focus on financial discipline underpins
our FY26 result. While the normalised results are an
improvement on prior year, the continued economic
downturn and competitive pressures did not provide the
volumes and margins needed to return to profit.
Volumes lifted 15.9% to 115k tonnes, with revenue up 13.9%
to $438.9m. Significant operating leverage is supporting
earnings growth ahead of revenue, with Normalised
EBITDA up 375.9% to $9.9m, and normalised EBIT of $(16.5)m,
a 22.7% improvement YoY.
5
Margins improved driven by the galvanizing business and
supported by the group-wide cost out programme and
freight and warehouse initiatives. Product margin increased
2.6 percentage points to 30.7%, with product margin
$/tonne of $1,167 (FY25: $1,088). Disciplined pricing, a higher
value product mix and ongoing cost discipline will deliver
further earnings and margin growth as activity returns.
The third phase of the cost out programme commenced
in 1H26 will deliver approximately $6m in annualised direct
and operating expense savings, and had a positive FY26
impact of $3.5m.
Inventory continues to be managed prudently to ensure
best use of working capital, with year-end inventory at
$111.0m (FY25: $113.6m). The number of SKUs has been
reduced, as we invest in higher value, higher demand
products and actively manage old, obsolete and excess
inventory lines.
A priority focus has been to rebuild balance sheet capacity.
M&A activity has been paused, capex restrictions are in
place and dividends are on hold. Net debt at 30 June 2026
was $48.0m, reflecting the ~$30m cash portion of the
Perry’s acquisition in May 2025. We were pleased to renew
our banking arrangements with ANZ until September 2027,
building on our strong banking partnership and providing
additional financial stability for the company.
This year’s result includes a non-cash $51.9m impairment to
reflect a write down in the carrying value of our business
units (as the result of accounting assessments made at
a point in time each year), as well as other non-trading
adjustments of $3.8m. We expect a significant proportion
of the impairment to reverse in future periods as the
economy recovers and the performance of the business
units improves. Including these, statutory net loss after tax
was $(61.2)m.
It is disappointing to report another loss, and our focus
remains firmly on returning the business to sustainable
profitability.
5
Normalised EBIT and EBITDA exclude non-cash impairment of assets and other non-trading adjustments. Including these, EBIT was $(72.2)m and EBITDA was $(45.8)m.
Steelē&ēTube Annual Report 202610
Looking Ahead
We enter FY27 as a more focused and more capable
organisation than we were at the beginning of this cycle.
The actions taken over recent years have strengthened
our operating platform, broadened our capabilities and
positioned the business to benefit as demand returns.
We are well positioned to capture the benefits of market
recovery. Although the timing and pace of this remain
uncertain, there are encouraging signs that activity across
several sectors, including export and manufacturing, is
gradually improving and we remain cautiously optimistic.
This year demonstrated our operating leverage and
proved our ability to increase earnings and margin as
volumes increase.
Our strategy remains unchanged – to strengthen the
core and grow high value products and services. We will
continue investing in our people, strengthening customer
relationships, allocating capital with discipline and pursuing
opportunities that enhance our competitive position and
create sustainable shareholder value.
We thank our customers, suppliers, business partners
and shareholders for their continued trust and support.
We are conscious that many of our customers continue to
operate in a challenging market where cost pressures are
significant. Our approach is to maintain disciplined pricing,
ensuring we deliver fair value while maintaining the quality,
service and expertise our customers rely on.
We also acknowledge the dedication of our people, whose
commitment and expertise continue to underpin the
strength and success of Steel & Tube.
Our shareholders deserve more and we are focused
on delivering. Our response is a significant reset of the
business, with a clear focus on stronger performance and
returns.
We are confident Steel & Tube is well placed for the
opportunities ahead and we remain committed to
supporting our customers, delivering for our shareholders
and helping build New Zealand.
Susan Paterson | Chair Mark Malpass | CEO
On behalf of the Board On behalf of the Executive Team
Mark Malpass
Chief Executive Officer
Susan Paterson
Chair
Steel & Tube Annual Report 202611
FIVE
MINUTES
WITH
James Campbell
National Pricing Manager
Q: What does your role entail?
At its heart, the role is about making sure we price our
products in a way that supports customers while delivering
sustainable returns for shareholders. We oversee pricing
across Steel & Tube's full product range, maintain pricing
frameworks, review customer agreements and turn
detailed market data into commercial recommendations
that help the business make informed decisions.
Q: What influences pricing
decisions?
Pricing starts with our customers. We take a tiered
approach that reflects purchasing history, long-term
relationships, and volume commitments, so pricing
recognises the value of each customer relationship rather
than applying a one-size-fits-all rate. From there, we factor
in our cost base, steel mill prices, freight, and inventory
costs, along with market conditions, demand, and project
volumes. The past year has proved particularly dynamic:
international commodity prices and geopolitical events
have moved fast, and the New Zealand market itself sits at
a genuine point of inflection off a low base.
Q: How important is data?
It's central to everything we do. We use a series of
tools to analyse historic price levels, inbound costs,
and inventory positions to build out our tiered pricing
structure in support of business strategy. We also use
customer feedback and benchmark ourselves against the
competitive landscape in New Zealand. That helps us make
informed decisions rather than reacting to short-term
market movements.
Q: How do you balance
competitive pricing with
creating value for customers
and shareholders?
It's about finding the right balance, particularly in a
competitive market that is very sensitive to change.
Customers value fair, consistent pricing and reliable
supply, while shareholders expect disciplined returns.
Our pricing framework provides clear parameters for
everyday transactions and we have a tiered approach to
price and volumes. We work closely with our customers to
ensure we have the right stock available at the right price.
Q: Why is pricing discipline so
important?
In a competitive market, it can be tempting to chase
volume by cutting prices. Without discipline, however,
discounts gradually increase, margins erode and
profitability suffers. Maintaining pricing discipline
helps ensure every sale contributes appropriately to
the business, supporting long-term value creation for
shareholders while allowing us to continue delivering
outstanding service to customers. As market activity
begins to recover, disciplined pricing will remain an
important contributor to sustainable earnings.
Steel & Tube Annual Report 202612
Revenue ($m)
Gross Margin $/Tonne
FIVE
MINUTES
WITH
James Campbell
National Pricing Manager
BUSINESS PERFORMANCE
Steel & Tube operates two complementary divisions, bringing together trusted
brands, quality products and specialist services. Together, they provide customers
with a comprehensive steel solution from the ground up.
Distribution
Carbon and Stainless Steel, Aluminium, Piping, Rural
Products, Fasteners, and Chain & Rigging
Products sourced from preferred steel mills and
distributed through our national network
Processing (including Galvanizing)
Roofing, Coil Processing, Purlins, ComFlor, CFDL,
Reinforcing, Galvanizing, Grating, Mesh and
Sandblasting
Products processed before sale, typically on a contract or
project basis, including onsite installation service
202.3
156.5
196.7
852
653
600
Gross Margin $/Tonne
Revenue ($m)
242.2
228.9
276.9
955
820
1,010
FY26FY26
FY26FY26
FY25FY25
FY25FY25
FY24FY24
FY24FY24
Steel & Tube Annual Report 202613
With New Zealand's most extensive range of
steel products, our Distribution business helps
customers source everything they need from a
single supplier. This is a value proposition that
works particularly well for SMEs, making it easy
for customers to source all their steel needs
from one place, saving them time and money.
We offer the country's most comprehensive range of steel
products, from HVAC and fire suppression systems through
to structural steel, stainless steel, aluminium and fasteners
used across the construction and manufacturing sectors.
Bulk purchasing from preferred, qualified suppliers enables us
to provide customers with reliable supply, competitive pricing
and flexible order quantities.
While demand remained subdued for much of the year, we did
see some recovery in certain sectors and regions. Cross selling
is working well, with customers increasingly buying multiple
products from across our range. Customer satisfaction remains
high and we continue to win new customers and business,
growing volume and revenue.
Our product mix is transitioning from low margin to higher
margin products. Demand for aluminium continues to grow
rapidly, and fasteners, stainless and engineering steels are also
back in growth mode.
While topline growth has been positive, increasing costs,
particularly fuel, have had an impact on this year’s result.
Several years ago we identified an opportunity to enter the
plate processing market. We saw early success, however,
extensive competition means returns have been below
expectations. Following the recent portfolio review, we are
planning to exit this market in FY27.
Distribution sales growth of 13% in
volume and 6% in Revenue
Aluminium sales up 58% year on
year, further expanded range of
product
Strong growth in new customers
trading with S&T
Growth in customers buying
multiple categories, with 54%
buying 3+ categories
Expanded Kiwi Pipe & Fittings range
with new flexible sprinkler drop for
fire protection applications
DISTRIBUTION
David Welsh
General Manager
Steel & Tube Annual Report 202614
EVERY
SUCCESSFUL
PROJECT
STARTS WITH
A STRONG
PARTNERSHIP
Steel & Tube has worked closely with Thermosash,
as part of their multi-source sheetmetal supplier
network, to ensure a reliable supply of aluminium
sheet for their high-performance façade systems.
By combining flexible cut-to-length processing, a
tailored supply agreement and a dedicated team
focused on service, we've helped simplify inventory
management, reduce waste and keep projects
moving. It's a partnership built on trust, collaboration
and a shared commitment to delivering outstanding
results for customers across New Zealand.
Steel & Tube Annual Report 202615
The Rollforming business comprises roofing
and cladding, coil and purlins, and the
manufacture of ComFlor composite steel
decking.
Demand was varied across product sectors, with improving
demand for coil and purlins and Comflor, whilst Roofing
remained challenging in a highly competitive market.
Commercial horizontal build projects, such as warehouses, have
supported Coil and Purlins demand, with a good short-term
pipeline in place. A new purlin line was installed in 1Q26 which
expanded manufacturing capacity allowing us to meet growing
demand. Alongside this, the manufacturing footprint has
been consolidated, with the closure of the South Island plant
delivering positive cost benefits.
Comflor volumes also increased, up 52% year on year, and
continue to hold strong.
The Roofing market remains highly competitive in a lower
volume market. Our focus is on retaining and growing market
share, while continuing to innovate and launch new products
such as a ventilated roofing solution for residential houses.
Despite the competitive environment, we remained disciplined
in our pricing approach, securing work through trusted
customer relationships, specification and technical expertise
while focusing on high service standards.
A focus this year has been on process efficiency and we are
seeing a good uplift in productivity and machinery efficiency,
alongside a reduction in waste and improvement in DIFOTIS.
ROLLFORMING
Peter Reiber
General Manager
New purlin line commissioned in
1Q26 providing expanded capacity
and improved efficiency
Uplift in specification work as result
of strengthened specifications and
technical teams
Launch of Warm Roof product in
partnership with Roof Logic
Development of cold roof overlay
solution for the commercial sector
– reducing disruption and time to
complete re-roofs
Steel & Tube Annual Report 202616
Perry Metal Protection is New Zealand's
market leader in hot dip galvanizing, a process
that coats black steel in molten zinc to
prevent rust and corrosion. The result is steel
that can last up to seven times longer, even in
the toughest conditions.
Following its acquisition by Steel & Tube in May 2025, the
business has continued to outperform, and has been
successfully integrated into the wider group, with high levels of
customer retention and minimal staff turnover. The expanded
service offer has enhanced cross-sell opportunities across both
Steel & Tube and Perry’s customer bases.
Despite a tough market, galvanizing volumes steadily improved
over the year, supported by key sales personnel. Demand has
been particularly strong in the heavy structural fabrication,
agriculture, horticulture and leisure markets. Examples of
work includes milking sheds, vineyards, boat trailers and larger
infrastructure projects.
Our focus on service, quality and supporting our customers
has reinforced and grown our market leadership.
GALVANIZING
Grew market leadership position
in hot dip galvanizing in the
New Zealand market
Successful integration into
Steel & Tube group
Favourable trading despite
challenging market conditions
Waikato Sandblasting underway
with ISO 9001 quality certification
process
Investment in plant, equipment,
and safety upgrades including pre-
treatment platforms and zinc splash
protection, resulting in enhanced
worker safety and raising the
standard of galvanizing across all
four operational sites
Introduced new Compliance Lead
role, providing an increased focus
on health and safety, regulatory
compliance and consents
Steve Halse
General Manager
Steel & Tube Annual Report 202617
PLAYING THE LONG GAME
AT MURIWAI DOWNS
Among the fairways and dramatic coastal terrain of
Muriwai Downs, structural steel is helping connect a
golf course designed for the world stage.
The project, being delivered by Fort Projects Ltd, has brought together
expertise from across the supply chain. Steel & Tube supplied a range
of structural steel products to D&H Steel, which fabricated the bridge
components. These were then hot-dip galvanised by Perry Metal Protection,
part of the Steel & Tube group, providing long-lasting corrosion protection,
particularly important in Muriwai’s exposed coastal environment.
Timing was critical. With several of the bridges being lifted into position by
helicopter, the galvanising needed to be completed within tight deadlines to
keep the carefully coordinated installation programme on track.
The project is a great example of Perry’s working closely with customers
to deliver both quality and reliability. The galvanized coating will protect
the steel from corrosion for many years, helping ensure these important
structures remain durable and low maintenance over their lifetime.
Photo courtesy of Fort Projects Ltd
Photo courtesy of Fort Projects Ltd
Steel & Tube Annual Report 202618
The Reinforcing business supplies reinforcing
steel, mesh and ComFlor (a leading composite
steel decking product made by Steel & Tube’s
Rollforming business). CFDL is the home of
ComFlor, providing sales, technical advice and
specialised installation services.
CFDL had a strong year, with an 87% increase in supply and install
year on year. Work was completed on large projects including
Hillmorton Hospital and 2 Devonport. This is a higher margin
business, that demonstrates the strength of Steel & Tube's
integrated business model. Manufactured by our Rollforming
business and supplied and installed by CFDL, it combines
in-house manufacturing, delivery and specialist installation to
deliver a seamless solution for customers.
Mesh and reinforcing volumes lifted year on year, however,
margins remain challenging and the business continues to be
loss-making. While we are a major market participant, it is a
commodity product with low margins and the industry remains
crowded, with excess capacity contributing to sustained pricing
pressure. Following the recent portfolio review, Steel & Tube
is planning to exit this business. This aligns with the company’s
strategic goal of focusing on higher-margin products and
services.
More customers choosing Steel &
Tube as their one-stop steel partner,
sourcing multiple steel solutions
for each project to simplify
procurement and delivery
Completed significant projects
including Waikato Regional Theatre,
the Central Interceptor, Scott Base
Fuel Facility (Antarctica) and Hanger
4 at Auckland Airport
Secured and commenced multiple
commercial and infrastructure
projects across New Zealand
Embedded manufacturing
excellence processes to increase
machine uptime
REINFORCING / CFDL
Peter Ensor
General Manager
Steel & Tube Annual Report 202619
Our ambition remains clear: to create long-term
value for our shareholders by building a stronger,
more resilient business that supports New
Zealand's future.
We recognise that sustainable success is measured by more than
financial performance. It is also reflected in how we support our
people, create value for our customers, strengthen the communities
we operate in, and control our environmental impact.
Our values continue to guide the way we do business. They shape
our culture, underpin good governance and risk management, and
help ensure we make decisions that create lasting value for all our
stakeholders.
During FY26, we continued to strengthen our business by investing
in our people, maintaining a disciplined approach to safety and
wellbeing, supporting our communities, and progressing practical
initiatives to manage our environmental impact.
Our approach is centered on four pillars. The following pages highlight
the progress we have made across each area.
W H AT
M AT T E R S
20Steel & Tube Annual Report 2026
21Steel & Tube Annual Report 2026
Providing a one-stop-shop for the most essential
steel products, and making it easier for our
customers to do business with us.
We are committed to making it easy to do business with Steel & Tube by
combining quality products, technical expertise and reliable service with
a deep understanding of our customers' businesses.
Our broad product offering, nationwide network and specialist services
enable customers to source more of their steel requirements from one
trusted supplier. This one-stop-shop approach simplifies procurement,
creates opportunities to deliver integrated solutions, and helps build
stronger, longer-term customer relationships. It is particularly valuable
for SME customers who care about service, quality, reliability and access
to a wide product range.
During FY26, we continued to invest in the areas that matter most to
our customers. We expanded our range of high-demand, high-value
products and solutions, strengthened our technical capability, and
improved the way customers interact with Steel & Tube. Our Webshop
also continues to grow, providing customers with a convenient way
to browse products, check availability and place orders whenever it
suits them.
Our digital marketing campaigns have proven popular, with a fun and
personable approach to purchasing steel products. Combined with the
efforts of our nationwide sales team, promotions and local business
initiatives, we have expanded our reach and increased brand awareness.
Delivering consistently high service remains a key priority, with
continuing high DIFOTIS performance reflecting the dedication of our
teams and the strength of our network.
Strong customer relationships are built over time, and they're one
of Steel & Tube's greatest strengths. By continuing to invest in the
products, expertise and service our customers value most, we're
strengthening long-term partnerships and reinforcing Steel & Tube's
position as a leading steel solutions provider.
CUSTOMER FIRST
FY26 Metric
Active customers~13,000
Webshop sales growth+ 6% YoY
Webshop orders18,000-plus
Customer NPS40
Technical specialists13
Planned SKUs~13,000
Steel & Tube Annual Report 202622
Always looking for ways to work smarter, and using technology and great thinking to pull it all
together and enable a better business.
Robust Supply Chain
Sam Reindler | GM Logistics and Distribution Centres
A reliable and efficient supply chain is fundamental to
delivering for our customers and supporting profitable
growth. Throughout FY26, we continued to strengthen our
network, improve efficiency and build resilience, ensuring
we can respond quickly as market activity increases.
We continued to invest in our distribution network to
improve productivity and customer service. Warehouse
layouts were redesigned to optimise product flow, while
our palletised warehouse project (completed in late-2024)
continues to deliver efficiency gains. We also increased
the proportion of customer deliveries made directly from
our distribution centres, reducing handling, lowering
warehousing costs and shortening delivery times. We have
identified a number of opportunities to consolidate smaller
sites across the network, simplifying our footprint and
supporting long-term efficiency. Our regional hubs are not
affected and will continue to provide our customers with a
one-stop-shop.
Our expanded in-house truck fleet continues to strengthen
our last-mile delivery capability, giving us greater control
over service levels while reinforcing Steel & Tube's end-to-
end customer offering and strong brand presence across
New Zealand.
Building a resilient supply chain remains a priority. During
the year, global shipping routes faced renewed disruption,
including the conflict in the Middle East. Through strong
supplier relationships, diversified sourcing across South East
Asia and contractual shipping arrangements that secure
freight capacity and rates, we maintained continuity of
supply with minimal disruption to our customers.
We also continued to improve the way we manage inventory
and working capital. The implementation of our Netstock
forecasting platform has strengthened demand planning
and inventory visibility, enabling better purchasing decisions,
improved product availability and more disciplined stock
management. We have continued to reduce slow-moving
and obsolete inventory while investing in the products and
locations where customer demand is strongest.
Our deep supplier relationships have allowed us to
progressively turn towards a more just-in-time inventory
model with shorter lead times. This provides greater
operational flexibility, supports working capital efficiency
and enables us to respond more quickly to changing
customer demand.
Together, these initiatives have created a more efficient,
resilient and scalable supply chain, well positioned to support
customers and capture the benefits of improving market
conditions.
Digital innovation
Rafaella del Prete | Chief Digital Officer
We continue to invest in digital and technology initiatives
that make it easier to do business with us, while improving
operational efficiency and service delivery.
During FY26, we completed the implementation of
Netstock and continued to expand our business intelligence
capabilities, with new dashboards giving managers greater
visibility and supporting faster, more informed decision-
making across the business.
Our customer-facing digital platforms also continued to
evolve. Enhancements to our Webshop have improved
product search, product information and the overall user
experience, contributing to a significant uplift in customer
satisfaction. Further enhancements are planned as we
continue to build a more intuitive and valuable digital
experience for customers.
Behind the scenes, increased automation of business
processes and transactional activities is making interactions
faster and simpler for customers, while allowing our people
to spend more time on higher-value customer support and
technical expertise.
A comprehensive vendor review during the year also
strengthened our technology partnerships, improving
service levels while delivering better value for the business.
CREATING A SUCCESSFUL AND
RESILIENT BUSINESS
Steel & Tube Annual Report 202623
Operating at the highest levels to de-risk our business.
John Gordon | General Counsel & QHSET (Quality, Health,
Safety, Environment and Training)
Health and Safety
Health, safety and wellbeing remain fundamental to how
we operate. We are committed to ensuring everyone goes
home safe, every day, and to building a culture where
every team member takes ownership of creating a safe and
healthy workplace.
Our health and safety management system continues to
be underpinned by our internationally certified Integrated
Management System, covering quality, occupational
health and safety, and environmental management. These
certifications provide a strong framework for managing
risk, driving continuous improvement and maintaining
high operational standards across the business.
During FY26, we strengthened our focus on worker
engagement and safety culture, recognising that
meaningful participation from our people is essential to
achieving lasting safety outcomes. This year, we have
extended our Killers and Lifesavers framework into the
Perry Metal Protection business. This framework identifies
our critical risks ("Killers") and the critical controls and
behaviours ("Lifesavers") required to prevent serious
harm. Using common language is helping to build greater
awareness, accountability and consistency across the
business.
We were also pleased to achieve a strong result in our
independent SafePlus assessment undertaken by HSE
Global. The assessment recognised the maturity of our
health and safety systems and reinforced the positive
progress being made in leadership, worker engagement
and continuous improvement.
Throughout the year, we worked closely with the Perry's
team to integrate our systems, standards and ways of
working while building on the strong safety foundations
already in place.
COMMITTED TO HEALTH, SAFETY,
QUALITY AND ENVIRONMENT
STOP
&
TAKE
Steel & Tube Annual Report 202624
Product Quality
The quality, reliability and traceability of our products are
fundamental to the trust our customers place in Steel &
Tube. Our rigorous quality assurance processes ensure
products consistently meet New Zealand standards and
perform as expected in some of the country's most
demanding applications.
We continue to source steel from carefully selected
suppliers and are one of the only companies in New
Zealand to undertake regular audit programmes at
our supplier mills. These independent assessments
provide assurance that manufacturing processes, quality
systems and production standards meet our stringent
requirements before products reach our customers.
Our commitment to quality is further supported by
our IANZ-accredited reinforcing steel testing laboratory,
comprehensive product quality manual and ISO
9001-certified quality management system.
Together, these provide a robust framework for quality
assurance, compliance and continuous improvement
across the business.
During FY26, we further strengthened product traceability
through the development of new digital dashboards,
providing greater visibility of product information
throughout the supply chain. These enhancements
improve efficiency, support regulatory compliance and
give customers confidence in the integrity and provenance
of the products they purchase.
Continuous improvement remains central to our
approach. Through regular internal and external audits,
close collaboration with suppliers and ongoing investment
in our quality systems, we continue to strengthen our
processes and maintain the high standards our customers
expect from Steel & Tube.
FY23 (base)FY24FY25
FY26
Incl PMP
FY26
Excl PMP
Scope 1 & 213.1316.2624.7841.2525.4
Environment
Steel & Tube is committed to reducing its environmental
impact and supporting the transition to a lower-emissions
future. While we are no longer required to report under
New Zealand's climate-related disclosure regime, we
remain committed to transparency and continue to report
our Scope 1 and Scope 2 greenhouse gas emissions.
Our approach focuses on practical initiatives that improve
efficiency and deliver measurable outcomes. Across our
operations, we continue to look at how we can reduce
electricity and gas consumption, improve transport
efficiency and minimise waste. We also work closely with
suppliers and customers to identify opportunities that
reduce environmental impacts across the value chain.
Steel is inherently well suited to a circular economy. It is
durable, endlessly recyclable and can be reused without
compromising quality. Through Perry Metal Protection, we
help customers extend the life of steel products through
galvanizing, reducing the need for replacement and
supporting more sustainable infrastructure.
We also continue to offer customers the option of lower-
carbon steel products, working with suppliers investing in
technologies such as electric arc furnaces and renewable
energy. The commissioning of New Zealand Steel's electric
arc furnace represents an important step in reducing the
carbon footprint of locally produced steel and is providing
greater access to lower-emissions steel for New Zealand
customers.
The increase in emissions in FY26 primarily reflects the
addition of PMP, which uses gas as its primary energy
source. This resulted in stationary combustion emissions
increasing from 4 tonnes CO₂ in FY25 to 1,482 tonnes CO₂
in FY26 and contributed to a higher emissions intensity
per tonne sold. Transport fuel emissions also increased,
reflecting growth in the internal truck fleet and the
addition of PMP vehicles and equipment following the
acquisition in May 2025. In FY25, the increase in emissions
compared with FY24 was primarily due to the integration
of the truck fleet into the business, while other emissions
measures remained relatively stable.
Emissions intensity: kg CO2e per tonne sold
Steel & Tube Annual Report 202625
Building one great team across Steel & Tube
Anna Morris | GM Team and Customer Experience
Our people are fundamental to Steel & Tube's success.
Throughout FY26, we continued to invest in building
a capable, connected and resilient workforce while
supporting our teams through a period of change.
During the year, we consolidated a number of sites with
these changes bringing teams together to create stronger
collaboration, share expertise and improve the experience
for both our people and our customers.
Developing technical capability remained a key focus. We
introduced new learning modules and monthly product
education sessions, giving our Customer Experience and
Sales teams greater confidence to support customers with
specialist advice across our broad product range.
By sharing knowledge across the business, we are making
it easier for customers to access the expertise they need,
while creating more opportunities for our people to grow.
One of the highlights of FY26 was welcoming back a
number of former employees who chose to return to Steel
& Tube. Their decision reflects the strength of our culture
and the opportunities available within our business.
Our values continue to shape how we work together.
Throughout the year, our monthly Manaakitanga Awards
recognised team members who demonstrate our
values every day, with all nominations acknowledged
and celebrated. These awards sit alongside our annual
Excellence Awards, recognising outstanding contributions
across the business.
We also continued to support employee wellbeing through
initiatives such as HealthNow, the Extraordinary Card
programme and the work of our employee-led Kaapuia
team, helping create a workplace where our people feel
included, supported, connected and able to thrive.
A WINNING TEAM AND
POSITIVE COMMUNITY IMPACT
Steel & Tube Annual Report 202626
Community
As a proud New Zealand business with sites across the
country, we believe strong businesses help build strong
communities. Our approach is centered on supporting
initiatives that create lasting benefits through education,
cultural connection and practical local partnerships.
Education continues to be an important focus. We proudly
continue our tertiary scholarship programme for the
children of Steel & Tube employees, helping young people
pursue further education and develop skills for the future.
Our annual Back to School Fund also supports families as
they prepare for the new school year.
We continue to support the annual Tūrangawaewae Marae
Junior Waka Ama Regatta in Ngāruawāhia – a highlight
on the youth sporting calendar and a meaningful way to
support rangatahi and local hapū.
We're equally proud of the many ways our people
contribute outside of work. Whether fundraising,
volunteering their time or supporting local events, our
teams continue to demonstrate the spirit of giving back
that is part of Steel & Tube's culture.
Sometimes it's the small things that make
the biggest difference.
During FY26, Steel & Tube partnered with
the Kiwi House in Otorohanga to design
and fund new visitor signage, helping
improve the experience for visitors to one
of New Zealand's best-loved conservation
attractions.
We were inspired by the Kiwi House's
commitment to creating sustainable
income through local tourism while
supporting the efforts of the Department
of Conservation. It was a practical way
for Steel & Tube to use our expertise to
help an organisation that is making a real
difference in its community.
While the project itself was relatively
small, the impact extends well beyond the
signs. More visitors help support the Kiwi
House, strengthen the local economy and
contribute to the long-term sustainability
of this important community asset.
It's a great example of our approach to
community partnerships—using our skills,
products and people to support initiatives
where even small contributions can create
lasting benefits.
HELPING
COMMUNITIES
HELP THEMSELVES
Steel/&/Tube Annual Report 202627
From storefront to branch manager
Sam Sutton | Branch Manager, New Plymouth
For New Plymouth Branch Manager Sam Sutton,
saying yes to new opportunities has taken him from
the warehouse floor to leading the branch.
Sam first joined Steel & Tube as a storeman, before
moving into customer service. After taking time
out for his OE in Europe, he returned in 2017 and
has since worked across Fortress, customer service
and operations, building his knowledge of the
business along the way.
Today, Sam leads the New Plymouth team,
combining a hands-on approach with responsibility
for sales, inventory and branch performance, while
making sure customers get the right products and
solutions for the job.
For Sam, it is the variety of the work and the
relationships built with customers and colleagues
that have kept things interesting.
Competitive, passionate and always ready to
get stuck in, Sam has made the most of every
opportunity at Steel & Tube. More than a decade
on, he still enjoys coming to work each day,
working alongside a great team, supporting
customers and taking on whatever challenge
comes next.
MEET SOME OF
OUR TEAM
Steel & Tube Annual Report 202628
A different kind of counsel
John Gordon | General Counsel, QHSET
John joined Steel & Tube as General
Counsel in 2019, but this year his
brief has expanded considerably.
He has taken on responsibility for
Quality, Health, Safety, Environment
and Training (QHSET) and joined the
Executive Leadership Team, bringing
together two broad portfolios with a
common thread: managing risk, getting
things done and building strong teams.
John came to Steel & Tube following
a varied career spanning secondary
school teaching, criminal and corporate
law, and in-house legal roles at IAG
and Genesis Energy. A career highlight
was working hands-on with NZI claims
following the Christchurch earthquakes.
He enjoys the breadth of issues
that come across his desk and the
opportunity to contribute to Steel &
Tube’s governance, strategy and key
decisions. But he gets just as much
satisfaction from helping teams resolve
the smaller, stubborn problems and
giving people the confidence to
tackle challenges themselves. Another
highlight has been building Steel &
Tube’s in-house legal capability and
supporting junior lawyers to develop
their careers.
Describing himself as flexible,
approachable and unpretentious, John
says that despite plenty of change since
he joined, Steel & Tube is “the best job I
have ever had”.
Building a career in sales
Rachael Staats | Sales Manager, Christchurch
For Christchurch Sales Manager, Rachael
Staats, one early customer win helped
spark a passion for sales that has shaped
a 15-year career at Steel & Tube.
Rachael started in internal sales and
has progressed through supervisor,
South Island Internal Sales Manager and
Account Manager roles before stepping
into her current position. Along the way,
she has built an in-depth knowledge of
Steel & Tube’s products, customers and
markets, earning her a reputation among
colleagues as a “walking steel dictionary”.
That first sales win came in her first year,
when Rachael put some newly learned
questioning skills to work with a relatively
small customer. The conversation
uncovered a much bigger opportunity
and, more than a decade later, that
business remains one of Steel & Tube’s
largest Christchurch customers.
More recently, Rachael has successfully
rebuilt relationships with several major
Christchurch manufacturing customers
and was recognised with a Salesperson of
the Year award.
Fast-paced, honest and supportive,
Rachael says it is the people,
opportunities and sheer variety that have
kept her engaged throughout her career.
Steel & Tube Annual Report 202629
THE BOARD
Steel & Tube’s board currently comprises
five independent directors, all of whom
have significant relevant industry and
market experience, skills and expertise
that are of value to the company.
The board has provided important
continuity and experience through
a period of significant change and
challenging market conditions.
Following a comprehensive search
process, the board is pleased to
welcome Tim Deane and Cassandra
Crowley as independent directors from
1 September 2026. Tim and Cassandra
bring fresh thinking, valuable experience
and a new perspective at an important
time for the company.
A board refresh is underway, bringing in
new skills, experience and perspectives
to support the opportunities ahead.
As part of this, three directors appointed
in 2017 will progressively be stepping
down. Susan Paterson has advised that
she will not be standing for re-election
at the end of her current term which
completes in 2027 and will stand down
when a suitable chair replacement has
been secured. Chris Ellis will stand down
in 2027 when a suitable director with
sector experience can be appointed.
With the recent appointment of two
new directors, Steve Reindler has
elected to bring his retirement date
forward to 1 September 2026.
This year’s Corporate Governance report
can be read on pages 81 to 92.
Susan Paterson
Appointed 16 January 2017
Chair and Independent Director
ONZM, CFINSTD, MBA (LDN), BPHARM
Susan was appointed Chair in Feb 2017.
A professional director since 1996 Susan became
an Officer of the Order of New Zealand (ONZM)
in 2015 for her services to corporate governance.
Having trained and practiced as a pharmacist,
Susan completed her MBA at London Business
School, then worked in strategy and IT consulting
and management roles in New Zealand, Europe
and USA. She worked in the steel sector at
Fletcher Challenge and was General Manager of
Wiremakers.
Andrew Flavell
Appointed 1 October 2021
Independent Director
NZCE, BE (HONS), ME, DR. ENG
Dr. Flavell has extensive international experience
in the information technology space. This includes
leading large teams, driving digital transformations,
delivering compelling consumer experiences,
personalisation and loyalty, privacy and security,
and AI and machine learning. In the roles he has
held over the past 30 years he has also contributed
significantly to risk management and governance in
the application of digital technologies.
Steel & Tube Annual Report 202630
Steve Reindler
Appointed 28 August 2017
Tenure ending at 2026 ASM
Independent Director
BE MECH (HONS), AMP, FIPENZ, CFINSTD
Steve is an engineer with a background in
large-scale infrastructure and heavy industry
manufacturing. He has held senior management
roles at Auckland International Airport, NZ Steel
and BHP Steel. Steve was inaugural chairman of
the Chartered Professional Engineers Council
and a President of the New Zealand Institution of
Professional Engineers.
Chris Ellis
Appointed 29 September 2017
Independent Director
BE, MS, CMINSTD
Chris’ background spans the manufacturing,
heavy construction and engineering sectors.
He qualified with a civil engineering degree from
the University of Canterbury, a Master of Science
in civil engineering from Stanford University and
more recently a senior executive program at
Wharton Business School. He is an experienced,
strategy-focussed director with an extensive career
in the Australasian building industry. He has held
CEO roles with Brightwater Group and at Fletcher
Building where he was Chief Executive of the
Building Products Division.
Karen Jordan
Appointed 10 December 2020
Independent Director
BSOCSC, FCMA, CFINSTD
Karen is experienced across private, public and
not-for-profit sectors. She is a Chartered Fellow of
both the IOD NZ and of CIMA. Karen has over 20
years' corporate experience in FTSE listed energy
companies in the UK energy infrastructure sector.
She is currently a director on the Board of Lyttelton
Port Company.
Steel & Tube Annual Report 202631
Steel & Tube’s leaders
are experts in their
area and have a proven
ability to build and lead
successful teams.
LEADERSHIP
TEAM
John Gordon
General Counsel & QHSET
BA, LLB
John joined Steel & Tube in 2019, with more than
20 years of legal experience. John has worked for
both large corporate law firms and as in-house
legal counsel for companies including nib, Genesis
Energy and IAG. In 2026, his role expanded to include
Quality, Health, Safety, Environment and Training.
Raffaella del Prete
Chief Digital Officer
BSENG, MSCENG, MRES
Raffaella joined the Steel & Tube team in December
2023, and brings over 20 years of IT experience to the
Chief Digital Officer role. She has worked in the UK,
France and New Zealand with global businesses such as
Vodafone, AIA, BP and Fonterra, giving her exposure
to a diverse range of businesses and technologies. Her
experience in leading digital transformations along
with sustainable technologies experience is a valued
addition to the Steel & Tube team.
Mark Malpass
Chief Executive Officer
MBA, BE (HONS), NZCE
Mark has had significant executive and governance
experience both in NZ and overseas. He worked
with ExxonMobil Corporation for over 19 years,
previously Managing Director of Mobil Oil NZ, and
was Chief Executive of Fletcher Building’s largest
division, Infrastructure Products. Mark was appointed
Chief Executive in February 2018, after initially being
appointed an Independent Director in March 2017
and then stepping down to take on the interim CEO
role in September 2017.
Richard Smyth
Chief Financial Officer
BCOM, FCA
Richard joined the company in 2021. A Fellow
Chartered Accountant, Richard has financial and
senior level leadership experience across the
entertainment and energy sectors. He commenced
his career within PwC’s audit team, working both in
New Zealand and overseas. His most recent role was
Deputy Chief Financial Officer at SkyCity.
Steel & Tube Annual Report 202632
Peter Ensor
GM Reinforcing, CFDL and Major Projects
MBA, BE CIVIL (HONS)
Peter joined Steel & Tube in 2021. He brings
extensive construction experience with over 25
years’ in the industry. Peter brings to Steel & Tube a
successful track record of leading and building teams
with a focus of health & safety, quality, financial
management and customer engagement. Peter
is a committee member of Civil Contractors NZ –
Auckland Branch, and is the Chair of the Concrete
NZ – Reinforcing Processor’s Sector Group.
Anna Morris
GM Team & Customer Experience
LLB, BA
Anna joined Steel & Tube in 2019. She is an
experienced executive with a background in people
and culture, law and corporate services. Anna has
worked extensively in the construction and building
industry, with her previous role being Head of
People & Performance at Fletcher Construction
Company Ltd.
Sam Reindler
GM Logistics & Distribution Centres
BE MECH (HONS)
Sam started working with Steel & Tube in January
2022 as the National Commercial Manager for
Reinforcing. He brings extensive engineering
and construction, operational and commercial
experience from companies such as KiwiRail,
Transport for London, Auckland Transport and
Waste Management.
David Welsh
GM Distribution
BCA
David joined in 2025 and has extensive general
management experience in multiple sectors in the
building industry including concrete, aggregates,
pipelines and roofing. Prior to Steel & Tube he
worked at Fletcher Building and has also held several
general management positions in manufacturing
including in the UK. David has a customer, sales,
and marketing background and is passionate about
delivering great customer experiences
and outcomes.
Peter Reiber
GM Rollforming
NZCE, MECHANICAL
Peter re-joined the Steel & Tube team in 2022, building
on over 20 years of industry and senior management
experience. With a specialisation in process
improvement, leadership and business development
for manufacturing and technology-driven companies,
Peter brings a wealth of knowledge and expertise to
the role.
Steve Halse
GM Galvanizing
Steve joined Steel & Tube in May 2025 through the
acquisition of Perry Metal Protection. He has led
Perry Metal Protection since April 2018, and has a
wealth of in-depth knowledge across the galvanizing
industry. Steve has a strong background in
operations and manufacturing as well as distribution,
logistics and supply chain. He has held a variety of
management and leadership roles in New Zealand,
previously working for SealesWinslow and the
Gallagher Group.
Steel & Tube Annual Report 202633
Non-GAAP Financial Information
Steel & Tube uses several non-GAAP measures when discussing financial performance. These include Normalised EBITDA, Normalised
EBIT and Working Capital. Management believes that these measures provide useful information on the underlying performance of
Steel & Tube’s business. They are used internally to evaluate performance, analyse trends and allocate resources. Non-GAAP financial
measures should not be viewed as a substitute for measures reported in accordance with NZ IFRS.
Non-Trading Adjustments/Unusual Transactions
The financial results for FY26 include transactions considered to be non-trading in either their nature or size. Unusual transactions
can be as a result of specific events or circumstances or major acquisitions, disposals or divestments that are not expected to
occur frequently. Excluding these transactions from normalised earnings and can assist users in forming a view of the underlying
performance of the group.
EBITDA/EBIT
EBITDA is Earnings/(Loss) before the deduction of interest, tax, depreciation and amortisation. EBIT is Earnings/(Loss) before the
deduction of interest and tax. These are both non-GAAP financial measures.
Earnings before interest, tax, other gains and losses and impairment represents operating profit for the year before other gains and
losses, impairment and deduction of interest and tax. Earnings before interest, tax and impairment represents operating profit for the
year including other gains and losses before impairment and deduction of interest and tax.
These are all non-GAAP financial measures. Management believes that these additional measures provide useful information on the
underlying performance of the group’s business.
Normalised EBITDA/EBIT
Earnings before interest, tax and other (losses)/gains and impairment. FY26 EBITDA and EBIT were impacted by
non-trading adjustments totalling $55.7m. Management believes that normalised measures provide a more appropriate measure
of Steel & Tube’s performance and more useful information on the normalised earnings of the company.
Working Capital
This means the net position after current liabilities are deducted from current assets. The major individual components of working
capital for the group are inventories, trade and other receivables and trade and other payables. How the group manages these has an
impact on operating cash flow and borrowings.
EBITDAEBIT
Reconciliation of Reported to Normalised Earnings
FY26
FY25FY26
FY25
Year Ended 30 June$000$000$000$000
Reported (45,815)(2 ,496)(72 , 201)(25,953)
Palletised warehouse project costs-1,364-1,364
Business restructuring costs1,3796991,379699
Acquisition and integration expenses296903296903
Software as a Service (SaaS) expenditure2,1741,6012,1741,601
Capital & Strategic review costs489-489-
Asset impairment charge51,866-51,866-
Fair value gain on contingent consideration(532)-(532)-
Normalised9, 8 5 72,071(16, 5 29)(2 1, 3 8 6)
FINANCIAL MEASURES
Steel/&/Tube Annual Report 202634
5 YEAR FINANCIAL PERFORMANCE
20262025202420232022
$000$000$000$000$000
Financial Performance
Sales438,864385,38947 9,1265 89,07859 9,14 8
EBITDA(45,815)(2,495)31,41551,87666,598
Depreciation and amortisation(26, 3 8 6)(23,458)(21,846)(20,867)(18,962)
EBIT(72 , 201)(2 5 ,95 3)9, 5 6931,0094 7, 6 3 6
Net finance costs(10,489)( 7,1 5 7 )(5,769)( 7, 2 3 9)(5,701)
Profit / (loss) before tax(82 ,690)(33,110)3,80023,77041,9 3 5
Tax (expense) / benefit21,5098,74 0(1,160)(6,7 7 3)(11,742)
Profit / (loss) after tax(61,181)(24, 370)2,64016 ,9 9 730,193
Operating cash inflow / (outflow)12,71610,42742,23598,280(34,117)
Funds Employed
Equity121,759182,334198,190208,154210,101
Non-current liabilities 1 3 9, 8 7 7138,61098 ,96186,50983,788
261,6363 20,94 42 9 7,1 5 1294,663293,889
Comprises
Current assets190,219190,585198,5512 24,94 0303,790
Current liabilities(10 0,960)(81,655)(56,658)(69,426)(13 9,9 7 1)
Working Capital89, 2 5910 8 ,9 3 0141,893155,514163,819
Non-current assets 172,377212,014155,25813 9,149130,070
261,6363 20,94 42 9 7,1 5 1294,663293,889
Statistics
Dividends per share (cents)
1
--6.08.013.0
Basic earnings per share (cents)(33. 3)(14.3)1.610.318.3
Return on Sales(1 3 .9)%(6. 3)%0.6%2 .9 %5.0%
Return on Equity(50. 2)%(13.4)%1.3%8.2%14.4%
Working Capital (times)
2
1.91.73.53.22.2
Net tangible assets per share$0.40$0.70$1.11$1.17$1.22
Equity to total assets33.6%45.3%56.0%5 7. 2 %48.4%
Gearing (debt to debt plus equity)33.0%21.5%--19. 5%
Net interest cover (times)
3
(6.9)(3.6)1.74.38.4
Ordinary shareholders6,2506,6907, 0 5 17, 2 6 97, 3 8 5
Employees901933858851829
-Female204225239221224
-Male695708618630605
-Gender diverse2-1--
Directors & Officers
-Female22222
-Male56666
1
Dividends per share are calculated based on dividends issued in respect of the financial year
2
Calculated using current assets/current liabilities
3
Calculated as EBIT over net finance costs (including NZ IFRS 16 Interest costs)
Steel & Tube Annual Report 202635
Financial Statements 2026 37
Statement of Profit or Loss and
Other Comprehensive Income 40
Statement of Changes in Equity 41
Balance Sheet 42
Statement of Cash Flows 43
Notes to the Financial Statements
Section A – Performance 44
Section B – Working Capital 51
Section C – Fixed Capital 56
Section D – Funding 64
Section E – Other 66
Independent Auditor's Report 77
General Information
Corporate Governance Report 81
Remuneration 93
Disclosures 97
Glossary 101
Directory 101
FINANCIAL
REPORT
36Steel & Tube Annual Report 2026
The Financial Report for Steel & Tube includes these sections:
· Financial Statements
· Performance
· Working Capital
· Fixed Capital
· Funding
· Other
Key Policy
Material accounting policies which are relevant to the understanding of the financial statements are highlighted throughout
the report.
Critical Accounting Estimates And Judgements
Preparation of these financial statements requires the exercise of judgements that affect the application of accounting policies, the
reported amounts of assets and liabilities, and income and expenses.
Estimates and judgements are continually evaluated, based on historical experience and other factors, including expectations of
future events that are believed to be reasonable under the circumstances. The group makes estimates and assumptions about the
future. Actual results may differ from these estimates.
Key Judgement
The estimates and assumptions that have a significant risk of causing a material adjustment to the carrying value of assets
and liabilities within the next financial year are highlighted throughout the report.
General Information
Steel & Tube Holdings Limited (the company or Steel & Tube) is registered under the Companies Act 1993 and is a FMC Reporting
Entity under the Financial Markets Conduct Act 2013. The company is a limited liability company incorporated and domiciled in
New Zealand. The group comprises Steel & Tube Holdings Limited and its subsidiaries.
The registered office of the company is 7 Bruce Roderick Drive, East Tamaki, Auckland, 2013, New Zealand.
Basis of Preparation
These financial statements have been prepared:
• In accordance with New Zealand Generally Accepted Accounting Practice (NZ GAAP), for which Steel & Tube is a for-profit entity
• To comply with New Zealand Equivalents to International Financial Reporting Standards (NZ IFRS) and with International Financial
Reporting Standards (IFRS)
• In accordance with the requirements of Part 7 of the Financial Markets Conduct Act 2013 and the NZX Main Board Listing Rules
(issued 31 January 2025)
• In New Zealand dollars (which is the company’s and subsidiaries’ functional currency and the group’s presentation currency) and
rounded to the nearest thousand dollars
• Under the historical cost convention, as modified by the revaluation of certain assets as identified in specific accounting policies
FINANCIAL STATEMENTS 2026
37Steel & Tube Annual Report 2026
Going Concern
In preparing these financial statements, the directors have assessed various events, conditions and uncertainties facing the group and
how these factors may impact the group's ability to continue as a going concern.
During the financial year, the New Zealand economy continued to face uncertainty driven by ongoing inflationary pressures and
heightened geopolitical tensions, especially the conflict in the Middle East. These factors have contributed to volatility across global
supply chains, increased input costs and a more cautious economic outlook. The New Zealand economy has been further impacted by
uncertainty associated with the general election on 7 November 2026. The challenging trading conditions have resulted in uncertainty
around demand.
These events and conditions have impacted the financial results of the group for the year. The group reported a loss before tax for the
year ended 30 June 2026 of $(82.7)m (FY25: $(33.1)m), net operating cash inflows of $12.7m (FY25: $10.4m) and recorded a closing net
debt balance of $48.0m (FY25: $36.3m), an increase of $11.7m from the prior year.
While directors expect the New Zealand economy to improve in the coming financial year, these conditions are forecast to continue
to impact the group and may impact compliance with the financial covenants within the bank borrowing facilities and may also require
additional or alternate funding compared to the group’s committed facilities (Note D1).
The group has responded to these events and conditions by the following actions:
• Renewed the group's Revolving Term & Cash Advance Facilities for a further one-year term until September 2027 (which is more than
twelve months of the financial statements being approved)
• Agreed revised covenants with its banking partner to ease the earnings and net debt covenants (Note D1) and changed the
consequence of covenant breaches from Events of Defaults to Events of Review
• Announced the closure and sale of the assets of the Reinforcing and Wire and Plate Processing operations (Note E6)
• Executed various other initiatives to optimise working capital and manage peak debt
• Closely managing its cash flow requirements and reviewing both its cost and capital structure
Forecasts
The group has prepared cash flow and profit forecasts for the years ending 30 June 2027 and 30 June 2028. Based on the forecasts
prepared, the group expects to be compliant with financial covenants over the forecast period.
Key assumptions in preparing the forecast include growth in sales volume, increases in average selling price and margin improvement
compared with the FY26 result. The forecast also assumes a market recovery in the second half of FY27. In addition, a number of cost
savings initiatives are underway. The FY27 forecast reflects the expected delivery of the following initiatives:
• Consistent with FY26, no incentive programme will be offered to management
• Constraining salary increases, focused on the lowest paid staff and those staff considered retention risks
• Site consolidations, the group is currently implementing seven site consolidations throughout the year. These are expected to
delivery an annualised cash saving of ~$2m
• Improving cash flows by selling slow moving inventory items at reduced margins, relocating inventory held at branch level to
minimise inventory purchases, and focusing on high margin products
• Restriction on unnecessary capital expenditures
The preparation of the FY27 forecast involves significant judgement regarding the improvement in trading performance and the
Group’s ability to successfully implement its planned initiatives. If achieved, the Group expects to remain compliant with its financial
covenants and operate within its committed facilities.
Banking Relationship
The group has a long, constructive, relationship with its banking partner, ANZ Bank New Zealand Limited. The group expects the
constructive relationship with ANZ Bank New Zealand Limited to continue. During the year the group has agreed several covenant
amendments. Current covenants are based on quarterly earnings and net debt targets. In addition, in June 2026 the group agreed a
one-year extension of the Revolving Credit & Cash Advance facilities until September 2027. The $20m Trade Loan Facility continues to
be repayable on demand.
The directors expect the group to be compliant with the financial covenants and operate within the committed facilities, but this is
highly dependent on assumptions regarding improved trading performance being achieved. Current trading conditions and cash flows
remain challenging as noted above. A breach of covenants could constitute an Event of Review of the Revolving Credit & Cash Advance
Facilities unless the relevant covenant is modified or waived.
38Steel & Tube Annual Report 2026
Going Concern Assessment
In assessing the adoption of the going concern assumption in the preparation of the consolidated financial statements, the directors
reviewed the group’s forecasts for the period from 1 July 2026 to 30 June 2028 and considered the achievability of the assumptions
underlying the forecasts, including the above initiatives.
Directors also considered the further mitigants available to the group if financial performance is below expectations. These further
mitigants include alternative sources of borrowing, assets sales, further working capital management and additional equity capital.
Exploratory work has been undertaken on these options to give us the ability to pursue if needed.
The directors are satisfied that the group’s financing position remains sound and will continue to review its funding requirements in
line with the evolving needs of the business to ensure the group has sufficient liquidity to discharge its liabilities as they fall due.
Based on the above, the directors have concluded that it is appropriate to prepare these financial statements on a going concern basis.
While the board is confident about the future of the group, it notes that the financial forecasts, the achievability of the various
initiatives underway and the availability of additional mitigants in the event of a further decline in steel volumes and margins are
dependent on factors outside of the control of the group. The directors note that there are a number of material uncertainties
related to unknown future events. These material uncertainties are related to events and conditions that may cast significant doubt
on the group’s ability to continue as a going concern. In the event the group cannot achieve its key initiatives, its further mitigants,
and cannot maintain its banking relationships, the group maybe unable to realise its assets and discharge its liabilities in the normal
course of business. These financial statements do not include any adjustments that would result from the basis of preparation being
inappropriate.
Non-GAAP Financial Information
The group’s standard profit measure prepared under New Zealand Generally Accepted Accounting Practice (GAAP) is profit for the
period, or net profit after tax. The group also uses non-GAAP financial information which is not prepared in accordance with New
Zealand International Financial Reporting Standards (NZ IFRS) when discussing financial performance. The directors and management
believe that this non-GAAP financial information provides useful information to readers of the financial statements to assist in the
understanding of the group’s financial performance.
Non-GAAP financial information used in these financial statements are:
• Earnings before interest, tax and other (losses)/gains and impairment
• Earnings before interest, tax and impairment
• Earnings before interest, tax, depreciation and amortisation (EBITDA); and
• Earnings before interest and tax (EBIT)
39Steel & Tube Annual Report 2026
Statement of Profit or Loss and Other Comprehensive Income
For the year ended 30 June 2026
Notes
2026
$000
2025
$000
Sales revenueA3 438,864 385,389
Other operating income 451 448
Cost of salesA2(355,071) (315,662)
Operating expensesA2(102,843) (94, 5 5 4)
Software as a Service (SaaS) upfront expenditure(2 ,174) (1,601)
Earnings before interest, tax and other (losses)/gains and impairment(20,773) (2 5 ,98 0)
Other gains438 27
Earnings before interest, tax and impairment(20,335) (2 5 ,95 3)
Impairment of assetsC 1/C 2/C4(51,866) -
Earnings before interest and tax(72 , 201) (2 5 ,95 3)
Finance incomeA6 249 590
Finance costsA6
(10,738) ( 7, 74 7 )
(Loss)/Profit before tax(82 ,690) (33,110)
Tax credit/(expense)A5 21,509 8,74 0
(Loss)/Profit for the year attributable to owners of the company(61,181) (24, 370)
Items that may subsequently be reclassified to profit or loss
Other comprehensive gain/(loss) - hedging reserve 262 (232)
Total comprehensive (loss)/income(60,9 19)(24,602)
Basic (loss)/earnings per share (cents)A1(33. 3) (14.3)
Diluted (loss)/earnings per share (cents)A1(33. 3) (14.3)
40Steel & Tube Annual Report 2026
Statement of Changes in Equity
For the year ended 30 June 2026
Share
capital
Retained
earnings
Hedging
reserve
Share-based
payments
Total
equity
Notes$000 $000 $000 $000 $000
Balance at 1 July 2025 16 6,9 2 1 14,566 (258) 1,105 182,334
Comprehensive income
Loss after tax - (61,181) - - (61,181)
Other comprehensive income
Hedging gains and losses - - 262 - 262
Total comprehensive (loss)/income - (61,181) 262 - (60,9 19)
Transactions with owners
Employee share schemes D3 - 369 - (25) 344
Balance at 30 June 2026 16 6,9 2 1 (46,246) 4 1,080 121,759
Balance as at 1 July 2024 155,127 42,050 (26) 1,039 198,190
Comprehensive income
Loss after tax - (24, 370) - - (24, 370)
Other comprehensive income
Hedging gains and losses - - (232) - (232)
Total comprehensive income/(loss) - (24,370) (232) - (24,602)
Transactions with owners
Dividends paid A1 - (3, 34 8) - - (3, 34 8)
Employee share schemes D3 285 234 - 66 585
Dividend reinvestment plan D3 233 - - - 233
Share capital issued relating to business combination 11, 276 - - - 11, 276
Balance at 30 June 2025 16 6,9 2 1 14,566 (258) 1,105 182,334
41Steel & Tube Annual Report 2026
Balance Sheet
As at 30 June 2026
Notes
2026
$000
2025
$000
Current assets
Cash and cash equivalentsE1 12,047 13,738
Trade and other receivablesB2 64,169 59,444
Contract assetsA4 1,487 2,633
InventoriesB1 110,95 5 113,598
Income tax receivable 1,139 1,171
Derivative assetsE1 422 1
190,219 190,585
Non-current assets
Loan receivableA6/E1 1,693 1,624
Deferred taxA5 30,003 8 ,9 0 9
Property, plant and equipmentC1 2 7, 2 2 4 45,068
IntangiblesC2 4 7, 6 5 5 54,619
Right-of-use assetsC4 65,802 101,794
172,377 212,014
Total assets 362,596 402,599
Current liabilities
Trade and other payablesB3 61,214 42,371
BorrowingsD1 20,000 20,000
ProvisionsE2 522 247
Derivative liabilitiesE1 - 1,069
Short term lease liabilitiesC4 19, 2 24 1 7,9 6 8
10 0,960 81,655
Non-current liabilities
BorrowingsD1 40,000 30,000
Trade and other payablesB3 4,981 5,504
ProvisionsE2 1,676 1,629
Long term lease liabilitiesC4 93,220 101,477
139,877 138,610
Equity
Share capitalD3 16 6,9 2 1 166,921
Retained earnings(46,246) 14,566
Other reserves 1,084 847
121,759 182,334
Total equity and liabilities 362,596 402,599
These financial statements and the accompanying notes were authorised by the board on 25 August 2026.
For the board
Susan Paterson | Chair Karen Jordan | Director
42Steel & Tube Annual Report 2026
Statement of Cash Flows
For the year ended 30 June 2026
Notes
2026
$000
2025
$000
Cash flows from operating activities
Customer receipts 435,738 3 8 7, 4 5 1
Interest receipts 180 498
Payments to suppliers and employees(41 2 ,9 1 3) (373,758)
Payments for interest on leases(6,777) (6, 26 6)
Income tax refund 33 3,604
Interest payments(3,545) (1,102)
Net cash inflow from operating activities 12,716 10,427
Cash flows from investing activities
Property, plant and equipment disposal proceeds 730 100
Property, plant and equipment and intangible asset purchases(6,981) (6,87 1)
Payment for new business purchase - (30,243)
Net cash outflow from investing activities(6, 2 5 1) ( 3 7, 0 1 4)
Cash flows from financing activities
Net drawdown/(repayment) of bank borrowings
10,000 50,000
Dividends paidA1 - (3,115)
Payment for leases(18,156) (15, 2 59)
Net cash (outflow)/inflow from financing activities(8,156) 31,626
Net (decrease)/increase in cash and cash equivalents(1,691) 5,039
Cash and cash equivalents at the beginning of the year 13,738 8,699
Cash and cash equivalents at the end of the year 12,047 13,738
Represented by:
Cash and cash equivalents 12,047 13,738
12,047 13,738
Reconciliation of (loss)/profit after tax to cash flows from operating activities
(Loss)/Profit after tax(61,181) (24, 370)
Non-cash adjustments:
Depreciation and amortisation 26,386 23,458
Deferred tax(2 1, 509) (8,74 0)
Impairment of assets 51,866 -
Gain on lease termination(6) (10)
Share scheme expense 657 670
Foreign exchange loss/(gains) 265 (118)
Other non-cash items(4 5) (113)
Gain on items classified as investing activities:
Loss/(gain) on property, plant and equipment disposals 100 (27)
(3,467) (9, 2 5 0)
Movements in working capital:
Income tax receivable 32 3,469
Inventories 2,643 7, 7 2 2
Trade and other receivables(3,579) 1,760
Trade and other payables and provisions 18,644 6,294
1 7, 74 0 19, 24 5
Investing and financing items included in working capital movements(1,557) 432
Net cash inflow from operating activities 12,716 10,427
43Steel & Tube Annual Report 2026
Notes to the Financial Statements
For the year ended 30 June 2026
This section focuses on the group’s financial performance and returns provided to shareholders.
A1: Dividends and Earnings per Share
No dividends have been declared for the year ending 30 June 2026.
2026
$000
2025
$000
Dividends paid - 3,348
Dividends paid includes prior year final dividend.
Basic earnings per share is calculated by dividing the net profit attributable to shareholders by the weighted average number of fully
paid shares less treasury shares.
Diluted earnings per share represents the group’s earnings per share if unvested share rights were exercised. The weighted average
number of shares is adjusted by the number of outstanding rights to executive shares that are deemed to vest at their future
vesting dates.
As at 30 June 2026, 4,502,012 options (2025: 3,164,454) were excluded from the diluted weighted-average number of ordinary shares
calculation because their effect would have been anti-dilutive.
Earnings per share (EPS)
2026
000
2025
000
(Loss)/Profit after tax(61,181)(24, 370)
Weighted average number of shares for basic EPS 183,632 170,565
Weighted average number of shares for diluted EPS183,632 170,565
Basic (loss)/earnings per share (cents)(33. 3)(14.3)
Diluted (loss)/earnings per share (cents)(33. 3)(14.3)
PERFORMANCE
SECTION A
44Steel & Tube Annual Report 2026
A2: Expenses
Cost of sales and operating expenses:Notes
2026
$000
2025
$000
Inventories expensed in cost of sales 314,073 283,382
Employee benefits 8 5,9 74 73,708
Depreciation and amortisationC 1/C 2/C4 26,386 23,458
Information technology expenses 7,1 7 5 6,999
Defined contribution plans 2,158 1,9 7 1
Acquisition and integration expenses 296 903
Directors' fees 551 643
Short term and low value lease costs 503 229
Impairment loss/(reversal) on trade receivables 371 (3)
Foreign exchange loss/(gains) 265 (118)
Other expenses 20,162 19,0 4 4
Total cost of sales and operating expenses 457,914 410,216
Inventory sold during the year is expensed as cost of sales. Inventory write-downs/(ups) of $0.1m (2025: $-0.3m) was incurred in the
ordinary course of business which are included within Inventories expensed in cost of sales.
Depreciation of $2m (2025: $1.8m) related to equipment used to manufacture products is included in cost of sales. Depreciation of
right-of-use assets and other depreciation is included in operating expenses.
Information technology expenses disclosed in the above table excludes SaaS upfront expenditure. This has been disclosed separately
on the Statement of Profit or Loss and Other Comprehensive Income.
Employee benefits expense in the current financial year include restructuring costs of $1.4m (2025: $0.7m) recognised as part of a
board approved restructuring plan.
In the current financial year, the group has incurred $0.3m (2025: $0.9m) of acquisition and integration expenses in relation to the
acquisition and integration of Perry Metal Protection.
45Steel & Tube Annual Report 2026
A3: Operating Segments
The group has identified three reporting segments as at 30 June 2026 having regard for the criteria outlined in NZ IFRS 8 Operating
Segments (NZ IFRS 8). The group’s Chief Operating Decision Maker (being the CEO) receives financial reports which aggregate the
activities of the group’s various operating segments into three distinct divisions, being Distribution, Processing and Galvanizing.
These reportable segments have been determined by having regard to the nature of products, services and processes the various
Business Units undertake to service customers. The group has a diverse range of customers from various industries, with no single
customer contributing more than 10% of the group’s revenue.
The group derives its revenue from the distribution, processing and galvanizing of steel and associated products. Within the
Distribution business, the primary focus is on the distribution of steel products and fasteners, servicing similar customer groups,
sharing similar business models and trading skills, and using similar sales channels. The majority of product is traded and sales staff
are tasked to know the full range of products. Within the Processing business, product is predominantly steel product which is
bought and processed/manufactured in warehouse facilities for project/contract customers. Galvanizing primarily provides hot dip
galvanizing services to customers.
The CEO uses EBIT as a measure to assess the performance of segments. The segment information provided to the CEO for the year
ended 30 June 2026 is as follows:
2026
Distribution
$000
Processing
$000
Galvanizing
$000
Reconciled
to group
$000
Timing of revenue recognition
At a point in time 242,200 108,445 31,559 382,204
Over time
- 56,660 - 56,660
Revenue from external customers 242,200 165,105 31,559 438,864
Depreciation and amortisation(12,817) (11,014) (2,555) (26, 3 8 6)
Impairment of assets(3 3,13 4)(18,732)-(5 1,8 6 6)
Expenses(242, 58 4) (166,308) (2 3 ,9 2 1) (432,813)
Segment EBIT (4 6 , 3 3 5) (3 0,949) 5,083 (72 , 201)
Interest on leases (3, 200) (2,555) (1,022) (6,777)
Interest - others (net)(3,712)
Reconciled to group loss before tax
(82 ,690)
2025
Distribution
$000
Processing
$000
Galvanizing
$000
Reconciled
to group
$000
Timing of revenue recognition
At a point in time 228,875 102,587 5,379 336,841
Over time
- 48,548 - 48,548
Revenue from external customers 228,875 151,135 5,379 385,389
Depreciation and amortisation(12,503) (10,561) (394) (23,458)
Expenses(231,986) (152,226) (3,672) (387,884)
Segment EBIT (15,614) (11,652) 1,313 (25,953)
Interest on leases (3, 360) (2,751) (155) (6, 26 6)
Interest - others (net)(891)
Reconciled to group loss before tax
(33,110)
46Steel & Tube Annual Report 2026
Operating segments are reported in a manner consistent with the internal reports that the CEO uses to assess performance.
Depreciation and amortisation recognised as at 30 June 2026 is inclusive of depreciation recognised under NZ IFRS 16 Leases, which is
in line with the financial reports received by the CEO.
Interest recognised under NZ IFRS 16 Leases is shown separately in the financial reports provided to the CEO. Other interest income
and expense are not allocated to segments as these are driven by the central treasury function, which manages the cash position of
the group.
Assets and liabilities are reported to the CEO on a group basis, and are not separately reported with respect to the individual
operating segments.
Sales between segments are eliminated on consolidation. The amounts provided to the CEO with respect to segment revenue are
measured in a manner consistent with that of the financial statements.
A4: Revenue recognised on construction contracts
Key Policy
Refer to Note E7 for the group's accounting policy on revenue recognised on construction contracts. A contract asset is
recognised when the group has completed its performance obligation in advance of the cash consideration (or the group's
entitlement to invoice the customer). A contract liability is recognised when the group receives cash consideration (or it is
due) in advance of the obligation being performed.
Key Judgement - Construction Contracts
Estimates and judgements are made by the group when assessing construction contracts. These vary between each project
based on specific contractual terms. The estimates and judgements inherent in accounting for the group's construction
contracts relate to the assessment of the forecast costs to complete the project, which includes an estimation of expected
material and labour costs and the quantum and likelihood of any revenue variations that the group is contractually entitled
to. If forecast costs are expected to exceed forecast revenues, a provision for onerous contract loss is recognised.
2026
$000
2025
$000
Contract assets 1,487 2,633
The contract assets relate to the group’s rights to consideration for work completed but not billed at the reporting date. The group's
contract liabilities are not material either in the current or comparative year.
47Steel & Tube Annual Report 2026
A5: Income and Deferred Tax
Income tax comprises both current and deferred tax.
All entities in the group are part of the same income tax group.
Key Policy
Current tax is the expected payable on the taxable income for the period, using current tax rates, and any adjustment
to tax payable in respect of prior periods.
Deferred tax is recognised in respect of temporary differences arising between the tax base of assets and liabilities
and their carrying amounts in the financial statements. Deferred tax assets are only recognised to the extent that it
is probable future taxable profits will offset temporary differences. Tax rates used are those that have been enacted
or substantially enacted at balance date and which are expected to apply when the deferred tax asset or liability
crystalises.
Deferred tax is not provided if it arises from the following differences:
• Goodwill not deductible for tax purposes
• Initial recognition of assets and liabilities in a transaction other than a business combination that affects neither
accounting or taxable profit
• Investment in subsidiaries where the timing of the reversal of the temporary difference is controlled by the group to
the extent that they will probably not reverse in the foreseeable future
Income and deferred tax
Income tax expense
20262025
The income tax expense is determined as follows:$000$000
Profit or loss
Current income tax
Current year income tax expense - -
Deferred income tax
Depreciation, provisions, accruals, tax losses and other(21,487) (8,781)
Adjustments in respect of prior periods(22) 41
Income tax expense in profit or loss(2 1, 509) (8,74 0)
20262025
Reconciliation of income tax expense$000$000
(Loss)/Profit before tax(82 ,690) (33,110)
Non-deductible expenditure 5,952 1,751
(76,738)(3 1, 3 59)
Tax at current rate of 28%(21,487)(8,781)
Prior period adjustment(22) 41
Total income tax expense(2 1, 509)(8,74 0)
Represented by:
Current tax - -
Deferred tax(2 1, 509)(8,74 0)
(2 1, 509)(8,74 0)
48Steel & Tube Annual Report 2026
Key Judgement - Tax Losses
The group has gross tax losses available to carry forward of $61.5m (2025: $32.8m). The group has assessed that it is probable
that there will be sufficient future taxable profit which will be available against which the tax losses can be utilised. As a
consequence, a deferred tax asset of $17.2m was recognised for these losses.
Deferred tax assets and liabilities
The table below shows the movement in the deferred tax balances that are recognised at the beginning and end of the period.
Opening
balance
$000
Prior period
adjustments
$000
Recognised
in income
$000
Recognised
in equity
$000
Closing
balance
$000
Group 2026
Property, plant and equipment & Intangibles( 7, 3 0 9) (60) 5,065 - (2 , 3 04)
Right-of-use assets(28,815) - 10,049 - (18,766)
Lease liabilities 33,444 - (1,960) - 31,484
Employee benefits 1,008 - 267 (313) 962
Provisions 1,301 - 99 - 1,400
Cash flow hedging reserve 99 - - (102) (3)
Net taxable losses 9,181 82 7,9 67 - 1 7, 2 3 0
8,909 22 21,487 (41 5) 30,003
Opening
balance
$000
Prior period
adjustments
$000
Acquired
in business
combination
$000
Recognised
in income
$000
Recognised
in equity
$000
Closing
balance
$000
Group 2025
Property, plant and equipment & Intangibles(2,079) - (5,408) 178 - ( 7, 3 0 9)
Right-of-use assets( 2 7, 0 4 2) - (4, 2 5 6) 2,483 - (28,815)
Lease liabilities 31,358 - 4,256 (2,170) - 33,444
Employee benefits 1,533 - - (298) (227) 1,008
Provisions 1,658 - - (357) - 1,301
Cash flow hedging reserve 9 - - - 90 99
Net taxable losses 277 (41) - 8 ,94 5 - 9,18 1
5,714
(41) (5,408) 8,781 (137) 8 ,9 0 9
2026
$000
2025
$000
The analysis of deferred tax assets and deferred tax liabilities is as follows:
Deferred tax liabilities(21,070) (36,124)
Deferred tax assets 51,073 45,033
30,003 8 ,9 0 9
Imputation credits available at 30 June 2026 were $26k (2025: $62k).
49Steel & Tube Annual Report 2026
A6: Net Finance Costs
2026
$000
2025
$000
Interest income under the effective interest method:
Interest received 180 498
Financial assets at FVTPL - net change in fair value:
Interest income - loan receivable* 69 92
Total finance income 249 590
Interest expense under the effective interest method:
Interest expense - bank 3,437 1,389
Interest expense - lease liabilities 6,777 6,266
Financial liabilities at FVTPL - net change in fair value:
Interest expense - contingent consideration** 524 92
Total finance costs 10,738 7, 74 7
Net finance costs(10,489) ( 7,1 5 7 )
2 1,95 5
*The loan receivable relates to the loan advance provided to a third party, ROBOS International Limited (ROBOS). Included in the
arrangement is an equity option. The loan receivable is classified as a financial asset at FVTPL (fair value through profit or loss). $1.5m
of the loan was drawn down as at balance date.
**The contingent consideration relates to a business combination in the prior year.
50Steel & Tube Annual Report 2026
Notes to the Financial Statements
For the year ended 30 June 2026
This section contains details of the short term operating assets and liabilities required to service the group’s distribution branches and
processing sites.
B1: Inventories
Key Policy
Inventories are stated at the lower of cost and net realisable value, with cost determined on a moving average cost basis
or standard cost basis. Costs include expenditure incurred in acquiring the inventories and bringing them to their existing
location and condition. Net realisable value is the estimated selling price in the ordinary course of business less the estimated
costs of completion, and selling expenses.
Key Judgement - Inventory Valuation
The majority of the group’s inventory comprises steel products and fastenings, which have long lives and generally are not
at risk of obsolescence. The group undertook an assessment of its inventory holdings at 30 June 2026 to determine whether
the net realisable value (NRV) of inventory was greater than or equal to the current carrying value of inventory. The group
has undertaken a full review of all aged inventory to identify any inventory at higher risk, particularly slow moving inventory.
Following this review, an impairment provision of $1.2m (2025: $1.4m) continues to be recognised as at 30 June 2026 to
record the carrying value of inventory at its NRV where that is considered to be lower than its cost. Judgement was required
in determining if the slow moving inventory can be sold and its expected sales price, and therefore whether inventory should
be impaired. This includes consideration of current market conditions and prices.
To further support the valuation of inventory the group operates a regular inventory count programme which requires
inventory to be counted on a cycle count basis, and through a full wall-to-wall count where required to ensure the accuracy
of the group’s inventory records.
The group holds inventories valued at $111.0m (2025: $113.6m).
Goods in transit
Provision for
write-down
Finished goods
at cost price
Inventories ($000s)
(1,223)
$110,955
2026
98,708
13,470
(1,432)
$113,598
2025
109,143
5,887
WORKING CAPITAL
SECTION B
51Steel & Tube Annual Report 2026
B2: Trade and Other Receivables
Key Judgement - Provision for Impairment
The group has applied the simplified approach to providing for expected credit losses, which requires the recognition of a
lifetime expected loss provision for trade and other receivables.
The expected credit loss (ECL) allowances for financial assets are based on assumptions about the risk of default and
expected credit loss rates. The group uses its judgement in making these assumptions and selecting the inputs to the
impairment calculation, which is based on the group’s historical experience, the aging profile of the financial assets,
existing market conditions as well as external economic forecasts at each reporting date. Details of key considerations and
judgements are set out below.
The group considers the lifetime expected credit losses associated with its receivables upon initial recognition, and on an
ongoing basis at the end of each reporting period. To assess whether there is a specific increase in credit risk, the group
compares the risk of default occurring on these receivables at the reporting date with the risk of default at the date of initial
recognition. The group considers its trade receivables to be in default when:
– The debtor is unlikely to pay its credit obligations to the group in full; or
– The receivable is more than 60 days past due (i.e. overdue)
Available forward looking information is considered, including actual or expected significant adverse changes in business,
financial or economic conditions that are expected to cause a significant change to the customer or counterparty’s ability to
meet their obligations. This also incorporates any objective evidence that indicates that the customers will not be able to pay
their debts when due, these include significant financial difficulties of customers and the probability of entering receivership
or bankruptcy.
The group has analysed its trade receivables balances using three different characteristics and calculated the ECL allowance
by considering the impact of each:
Consideration/Judgements
Baseline/AgingThe group’s “baseline” expectation for credit loss is informed by past experience and the aging profile
of the balances, applying an increasing expected credit loss estimate as the balance ages incorporating
forward looking information, such as forecasted economic conditions. This expectation incorporates
any available objective evidence that the customers will not be able to pay their debts when due,
including significant financial difficulties of customers and the probability of entering receivership,
administration or liquidation.
SectorThe group has considered the credit risk related to the market sector that the customers operate in
and has made an adjustment to the ECL allowance based on assessment of the respective financial
strength of each industry sector.
RegionThe group has considered the credit risk of its trade receivables portfolio based on the respective
financial strength of each geographic region, and has made an adjustment to the baseline ECL
allowance to reflect this.
52Steel & Tube Annual Report 2026
Trade receivables at 30 June 2026 are $59.8m (2025: $55.0m) and are recognised initially at fair value and subsequently at amortised
cost less any provision for impairment. The carrying value of trade and other receivables are equivalent to their fair value.
Trade receivables
Prepayments and
sundry receivables
Provision for
impairment
Trade and Other Receivables ($000s)
2025
$59,444
55,043
5,461
(1,060)
2026
$64,169
59,842
5,552
(1,225)
No one customer accounts for more than 3% of trade receivables at 30 June 2026 (30 June 2025: 3%).
The aging profile of the group's customer balances is shown below.
Trade receivables excluding current at 30 June 2026 ($000s)
Within
1 month
Within 1 to
2 months
Beyond
2 months
20262025
6,082
559
1,619
1,983
436
1, 274
53Steel & Tube Annual Report 2026
At 30 June 2026, trade receivables of $1.6m (2025: $1.3m) were greater than 60 days overdue. These relate to a number of
independent customers for whom there is no recent history of default. The group’s credit terms are in line with industry peers.
The group does not have any customers with payment terms exceeding one year. As a result, the group does not adjust transaction
prices for the time value of money.
Provision for impairment
At 30 June 2026, an impairment provision of $1.2m (2025: $1.1m) was held.
The expected credit loss allowance provision has been determined as follows:
As at 30 June 2026
Current
$000
Within
1 Month
$000
1 - 2
Months
$000
2-3
Months
$000
Beyond
3 Months
$000
Total
$000
Gross carrying amount 51,582 6,082 559 200 1,419 59,842
Baseline/Aging 178 105 39 26 861 1,209
Region 3 2 1 - 2 8
Sector 3 2 1 - 2 8
Expected credit loss allowance 184 109 41 26 865 1,225
As at 30 June 2025
Current
$000
Within
1 Month
$000
1 - 2
Months
$000
2-3
Months
$000
Beyond
3 Months
$000
Total
$000
Gross carrying amount 51,350 1,98 3 436 213 1,061 55,043
Baseline/Aging 181 35 41 33 760 1,050
Region 3 1 - - 1 5
Sector 3 1 - - 1 5
Expected credit loss allowance 187 37 41 33 762 1,060
Movements in the provision for impairment for the year ended 30 June 2026, are as follows:
20262025
Provision for impairment$000$000
Provision as at 1 July 1,060 1,135
Impairment loss/(reversal) on trade receivables 371 (3)
Amounts written off(206) (72)
Provision as at 30 June 1,225 1,060
54Steel & Tube Annual Report 2026
B3: Trade and Other Payables
Trade and other payables ($000s)
Employee benefits
Accrued expenses and
other payables
Trade payables
$66,195
2026
49, 8 2 3
6,934
4,457
4,981
Contingent
consideration liability
$47,875
2025
33,109
5,370
4,407
4,989
20262025
$000$000
Current 61,214 42,371
Non Current 4,981 5,504
66,195 47,875
The carrying amounts of the above items are equivalent to their fair values and subsequently measured at amortised cost using
the effective interest method. Trade and other payables are classified into current and non-current portions based on their
contractual maturity. As at 30 June 2026, a balance of $61.2m (2025: $42.4m) is classified as current, representing obligations due
within 12 months after the reporting date and a balance of $5.0m (2025: $5.5m) is classified as non-current, representing amounts
due beyond 12 months.
55Steel & Tube Annual Report 2026
Notes to the Financial Statements
For the year ended 30 June 2026
This section includes details of the group's long term assets including tangible and intangible assets and related capital commitments.
C1: Property, Plant and Equipment
Key Policy
Plant and equipment are stated at cost less accumulated depreciation. Assets are tested annually for indicators of impairment
and adjusted if required.
Depreciation is charged on a straight-line basis over the estimated useful lives of the assets. This allocates the cost of an asset,
less any residual value, over its estimated remaining useful life. The residual values and useful lives are reviewed annually.
The estimated useful lives are as follows:
Plant, machinery and motor vehicles 3 – 20 years
Furniture, fittings and equipment 2 – 10 years
Gains and losses on disposals are determined by comparing proceeds with carrying amounts and are included in profit or loss.
Plant, machinery
& vehicles at cost
Furniture, fittings &
equipment at costTotal
2026
Note
$000 $000 $000
Opening cost 102,422 21,325 12 3,747
Opening accumulated depreciation(59,9 9 9) (18,680) (78,679)
Opening net book value 42,423 2,645 45,068
Additions 5,017 879 5,896
Disposals(829) - (829)
Depreciation(4,49 3) (8 69) (5,362)
Impairment chargeC2( 1 7, 5 3 7 ) (12) ( 1 7, 5 4 9)
Closing net book value 24,581 2,643 2 7, 2 2 4
Comprised of:
Cost or fair value 105,970 22,198 128,168
Accumulated depreciation and impairment(81, 3 89) (19,555) (10 0,94 4)
Property, plant and equipment 24,581 2,643 2 7, 2 2 4
2025
Opening cost 93,496 21,163 114,659
Opening accumulated depreciation(56,8 49) ( 1 7, 8 0 0) (74,6 49)
Opening net book value 36,647 3,363 40,010
Additions 5,710 319 6,029
Acquired through business combination 4,048 59 4,107
Disposals(101) - (101)
Depreciation(3,881) (1,096) (4,977)
Closing net book value 42,423 2,645 45,068
Comprised of:
Cost or fair value 102,422 21,325 12 3,747
Accumulated depreciation(59,999) (18,680) (78,679)
Property, plant and equipment 42,423 2,645 45,068
Included within the plant, property and equipment categories is capital work in progress totalling $0.7m (2025: $4.2m).
Further information regarding impairment assessments performed during the year, including key assumptions and impairment losses
recognised is included in Note C2 under Key Judgement - Impairment Testing.
FIXED CAPITAL
SECTION C
56Steel & Tube Annual Report 2026
C2: Intangibles
Goodwill
Software &
Licences
Brand &
Trademarks
Customer
RelationshipsTotal
2026$000 $000 $000 $000 $000
Opening cost 75,248 32,817 10,597 12,468 131,130
Opening accumulated amortisation and impairment
(4 7,1 7 1) (26, 522) (41 0) (2,408) (76, 511)
Opening net book value 28,077 6,295 10,187 10,060 54,619
Additions - 1,104 - - 1,104
Amortisation charge - (1,821) (33) (5 6 6) (2 ,420)
Impairment charge (4, 761) (4 67) (171) (249) (5,648)
Closing net book value 23,316 5,111 9,98 3 9, 24 5 4 7, 6 5 5
Comprised of:
Cost 75,248 33,921 10,597 12,468 132,234
Accumulated amortisation and impairment(51,9 3 2) (28,810) (614) (3, 223) (84,579)
Closing net book value 23,316 5,111 9,98 3 9, 24 5 4 7, 6 5 5
2025
Opening cost 5 1,9 3 2 31,708 443 2,941 87,024
Opening accumulated amortisation and impairment(4 7,1 7 1) (24,618) (382) (2,188) (74, 3 59)
Opening net book value 4,761 7, 0 9 0 61 753 12,665
Additions - 1,109 366 - 1,475
Acquired through business combination 23,316 - 9, 78 8 9, 5 2 7 42,631
Amortisation charge - (1,9 0 4) (28) (2 20) (2,152)
Closing net book value 28,077 6,295 10,187 10,060 54,619
Comprised of:
Cost 75,248 32,817 10,597 12,468 131,130
Accumulated amortisation and impairment(4 7,1 7 1) (26,522) (410) (2,408) (76, 511)
Closing net book value 28,077 6,295 10,187 10,060 54,619
Included within the intangibles categories is capital work in progress totalling $0.5m (2025: $0.5m).
Further information regarding impairment assessments performed during the year, including key assumptions and impairment losses
recognised is included in this note under Key Judgement - Impairment Testing.
57Steel & Tube Annual Report 2026
Key Policy
Goodwill is recognised on a business combination and represents the excess of the acquisition cost over the fair value of the
acquired net assets. Goodwill is allocated to cash-generating units, tested annually for impairment, or more frequently if
events or circumstances indicate it may be impaired, and is carried at cost less accumulated impairment losses.
Computer software and licences are capitalised on the basis of costs incurred to acquire and use the specific licences and
are amortised on a straight-line basis over their estimated useful lives of 3 to 10 years. Computer software and licence
amortisation charges are included in other operating expenses.
Customer relationships are capitalised at fair value on acquisition date and are amortised on a straight-line basis over their
estimated useful lives of between 10 to 20 years. Amortisation charges are included in operating expenses.
Brands are considered to have an indefinite useful life when there is no foreseeable limit to the period over which the
brands are expected to generate net cash flows. These are held at cost and are not amortised but are subject to an annual
impairment test. Trademarks and patents are capitalised on the basis of costs incurred to acquire and use the specific
licences and are amortised on a straight-line basis over their estimated useful lives of 5 to 10 years.
Software as a Service arrangements are service contracts providing the group with the right to access the cloud provider’s
application software over the contract period. As such, the group does not receive a software intangible asset at the
contract commencement date. For SaaS arrangements, the group assesses if the contract will provide a resource that it can
‘control’ to determine whether an intangible asset is present. If the group cannot demonstrate control of the software, the
arrangement is deemed a service contract and any implementation costs including costs to configure or customise the cloud
provider’s application software are recognised as operating expenses when incurred.
Where the SaaS arrangement supplier provides both configuration and customisation services, judgement has been applied
to determine whether each of these services are distinct or not from the underlying use of the SaaS application software.
If distinct, such costs are expensed as incurred when the services is provided. If not distinct, such costs are expensed over
the SaaS contract term. In implementing SaaS arrangements, the group has incurred customisation costs which creates
additional functionality to a cloud based software. Management has determined that it has rights to the intellectual property
and has owned the developed software which meets the definition and recognition criteria for an intangible asset.
Cost incurred for the development of software that enhances or modifies, or creates additional functionality to an
on-premise software that meets the definition and recognition criteria of intangible assets are recognised as intangible
assets. When these costs are recognised as intangible software assets they are amortised over the useful life of the software
on a straight line basis.
58Steel & Tube Annual Report 2026
Key Judgement - Impairment Testing
NZ IAS 36 Impairment of Assets (NZ IAS 36) requires the group to assess at the end of each reporting period for any
indicators of impairment and where indicators are identified, to test the recoverable amount of the group’s assets against
its carrying value to assess whether any impairment exists. The recoverable amount is the higher of an asset’s fair value less
costs of disposal (FVLCD) and value-in-use (VIU). For the purpose of assessing impairment, assets are grouped in the smallest
identifiable group of assets that generates cash inflows that are largely independent of the cash inflows from other assets or
groups of assets (cash generating unit or CGU).
In the prior year, Reinforcing and CFDL were assessed together as a single CGU for impairment purposes. Following the
group’s plans to discontinue the Reinforcing operations (refer to Note E6), the group has decided to test these as separate
CGUs in the current year. The CFDL CGU is not material to the group and has therefore not been separately disclosed.
The following table summarises the total impairment recognised by the group as at 30 June 2026:
$000
Impairment of individual assets573
Assessed using VIU as recoverable amount45,069
Assessed using FVLCD as recoverable amount6,224
Total impairment recognised in Statement of Profit or Loss and Other Comprehensive Income51,866
Impairment Indicators
Impairment of individual assets
During the year, the group recognised impairment losses of $0.6m ($0.1m in relation to right-of-use leased assets and $0.5m
in relation to PPE and intangibles) following the identification of impairment indicators. These included the consolidation of
operating sites which resulted in certain assets no longer being expected to generate future economic benefits as previously
anticipated. The recoverable amount of the affected assets was determined based on VIU.
The impairment has been recognised as a separate line item on the face of the Statement of Profit or Loss and Other
Comprehensive Income as “Impairment of assets”.
The group has also concluded that no reversal of the previous impairment of intangible assets should be made following an
assessment that previous assumptions applied remain consistent in the current year.
CGU impairment
As at 30 June 2026, the group's market capitalisation was below the carrying value of its net assets. Accounting standards
consider this to be an indicator of impairment. The market capitalisation value excludes any control premium and may not
reflect the value of 100% of the group’s net assets. In addition, the group considered the challenging economic environment
in New Zealand, including persistent inflationary pressures, heightened geopolitical tensions and election-related
uncertainty. The resulting higher input costs, supply chain volatility and uncertainty around demand were considered as
potential external indicators of impairment.
Based on the above indicators, the group performed an impairment assessment of the CGUs identified. The recoverable
amount of the CGUs was determined applying both VIU and FVLCD and the higher was adopted as the recoverable amount.
59Steel & Tube Annual Report 2026
Distribution, Rollforming and Galvanizing CGUs – Value in Use
An impairment loss of $45.1m was recognised where the carrying amount of the CGU exceeded its recoverable amount.
The impairment has been recognised as a separate line item on the face of the Statement of Profit or Loss and Other
Comprehensive Income as “Impairment of assets”. The following table sets out the CGU impairment losses recognised:
CGU
Recoverable
amount
$000
Impairment
$000
Distribution6 5 ,95 232,148
Rollforming21,27312,9 2 1
Total impairment45,069
The impairment losses have been allocated to the respective asset classes on a pro rata basis as follows:
Asset class
Distribution
$000
Rollforming
$000
Total
$000
Goodwill4,761-4,761
Right-of-use assets20,2005,60425,804
Property, plant and equipment6 ,9 3 87,1 4 614,084
Intangibles249171420
Total impairment32,14812 ,9 2 145,069
The group has assessed the recoverable amount of these CGUs by reference to its VIU which is determined using a
discounted cash flow model over a five-year period. Key assumptions for earnings are based on the board approved budget
for the FY27 period with the forecast period growth rates applied over the remaining forecast period (2028 to 2031). The
inputs used for the growth in revenue and gross margin in the CGUs reflect past experience and the forecast performance of
the group. The FY27 budget assumes some recovery, in comparison to FY26, in volumes, average selling price and margins.
The recoverable amounts of the CGU were estimated based on the following key assumptions:
Key AssumptionsDistributionRollformingGalvanizing
Revenue growth (FY26 to FY31 CAGR)8.2%7. 7 %6.2%
Gross margin percentage growth (FY26 to FY31 percentage point improvement)5.5%2.8%0.8%
Terminal growth rate2.1%2.1%2.1%
CAGR represents the compound annual growth rate
The group engaged an independent expert to assess the CGU’s post-tax weighted average cost of capital which is used as the
discount rate. The discount rates applied were:
20262025
Key AssumptionsDistributionRollformingGalvanizingDistributionRollformingGalvanizing
Discount rate (post-tax)10.8%10.8%11.0%11.0%11.0%11.0%
Discount rate (pre-tax)13.5%13.2%14.4%14.4%14.6%14.5%
The Galvanizing CGU includes goodwill with a carrying amount of $23.3m with no impairment identified. Sensitivity analysis
was undertaken which concluded that the Galvanizing results are not particularly sensitive to changes in the underlying
assumptions.
60Steel & Tube Annual Report 2026
Impact of possible changes in key assumptions on Distribution CGU
If the revenue CAGR assumption used in the VIU calculation had been 100 basis points (bp) lower than the group’s current
assumption as at 30 June 2026 (7.2% instead of 8.2%), the group would have had to recognise an additional impairment of
$25.2m. A 100 bp reduction in the gross margin percentage in FY31 would have resulted in additional impairment of $20.8m
against the CGU’s carrying amount. If the post-tax discount rate applied to the cash flow projections had been 100bp higher
than the group’s estimates (11.8% instead of 10.8%), the group would have had to recognise an additional impairment of
$11.6m against the carrying amount.
Impact of possible changes in key assumptions on Rollforming CGU
If the revenue CAGR assumption used in the VIU calculation had been 100 basis points (bp) lower than the group’s current
assumption as at 30 June 2026 (6.7% instead of 7.7%), the group would have had to recognise an additional impairment of
$9.9m. A 100 bp reduction in the gross margin percentage in FY31 would have resulted in additional impairment of $9.8m
against the CGU’s carrying amount. If the discount rate applied to the cash flow projections had been 100bp higher than the
group’s estimates (11.8% instead of 10.8%), the group would have had to recognise an additional impairment of $3.6m against
the carrying amount.
Reinforcing CGU – Fair Value Less Costs of Disposal
In addition to the external impairment indicators mentioned previously, additional impairment indicators were identified
for the Reinforcing CGU due to the group’s plans to discontinue the operations of the CGU (refer to Note E6). The expected
cessation of operations and associated reduction in the future economic benefits generated by the CGU were considered
potential indicators that the carrying amounts of the CGU’s assets may not be recoverable.
The recoverable amount of the CGU was determined based on fair value less costs of disposal, resulting in an impairment
loss of $6.2m. The impairment loss was recognised against the property, plant and equipment being $3.4m and right-of-use
leased asset being $2.8m.
The valuation was classified as Level 3 in the fair value hierarchy due to the significance of unobservable inputs.
Key assumptionsBasis for determination
Valuation techniqueFVLCD was determined using a discounted cash flow valuation technique by discounting forecast
cash flows using a market participant discount rate
Discounted cash flow
assumptions
The forecast cash flows were developed based on sub-lease assumptions, including expected sub-
lease income, sub-lease term period and discount rate used. Market-participant pricing evidence
was used to value the property, plant and equipment
61Steel & Tube Annual Report 2026
C3: Commitments
Capital commitments
The group has contractual commitments of $0.4m (2025: $0.4m) for purchase of plant and equipment.
C4: Leases
Leases
Under NZ IFRS 16 Leases, the group recognises right-of-use assets and lease liabilities for a number of categories of operating leases,
including:
• Property leases - the group has a variety of property leases across its national network of branches and processing facilities.
Where the group has entered into sub-leases in respect of its property leases, each sub-lease will be assessed under the standard
to determine if it qualifies as a finance lease or an operating lease under NZ IFRS 16
• Motor vehicle leases - the group leases motor vehicles for staff use in sales and day-to-day operations
• Equipment leases - the group leases certain equipment for use in its distribution, manufacturing and warehousing activities.
This includes material handling equipment such as forklifts and pallet trucks
• Other leases - other leases includes the lease of assets such as IT equipment, photocopiers and other plant or office equipment
On inception of a new lease, the lease liability is measured at the present value of the remaining lease payments, discounted using the
group’s incremental borrowing rate at that date. The right-of-use assets are measured at an amount equal to the lease liability, and
are depreciated over the estimated remaining lease term on a straight-line basis. The group presents the right-of-use assets and lease
liabilities separately on the face of the Balance sheet.
The group has utilised the practical expedients specified in NZ IFRS 16 in respect of short-term and low value leases where
appropriate, as well as the use of a single discount rate to a portfolio of leases with reasonably similar characteristics.
The right-of-use assets are depreciated over a period of 1 to 17 years.
Key Judgement – Impairment Testing on Right-Of-Use Assets
The board has approved a site consolidation plan in the current financial year and the group has undertaken an impairment
assessment of the impacted sites. This has resulted in an indicator of impairment in respect of the right-of-use leased assets
for these sites. The group has assessed the impairment of right-of-use assets based on its ability to recover any value via
potential sub-lease arrangements. Further information regarding impairment assessments performed during the year,
including key assumptions and impairment losses recognised is included in Note C2 under Key Judgement - Impairment
Testing.
62Steel & Tube Annual Report 2026
The below outlines the recognised right-of-use assets and corresponding lease liabilities by the group as at 30 June 2026:
PropertiesMotor VehiclesEquipmentTotal
Notes$000$000$000$000
Right-of-use assets at 1 July 2025 9 2 ,98 3 4,165 4,646 101,794
Additions to right-of-use assets 7,9 3 8 545 4,755 13,238
Depreciation(15,196) (1,743) (1,665) (18,604)
Disposals(1,887) (38) (32) (1,95 7)
Impairment chargeC2(2 5,674) (825) (2,170) (28,669)
Total right-of-use assets at 30 June 2026 58,164 2,104 5,534 65,802
PropertiesMotor VehiclesEquipmentTotal
$000$000$000$000
Right-of-use assets at 1 July 2024 89,215 4,258 1,864 95,337
Additions to right-of-use assets4,529 1,603 2,651 8,783
Acquired through business combination 14,009 - 1,192 15,201
Depreciation(13,737) (1,685) (907) (16,329)
Disposals(1,033) (11) (15 4) (1,198)
Total right-of-use assets at 30 June 2025 9 2 ,98 3 4,165 4,646 101,794
Amounts recognised as lease liabilities are presented below.
Lease liability maturity analysis
PrincipalInterestGross
2026$000$000$000
Between 0 to 1 year 19, 2 24 5,726 24,95 0
Between 1 to 5 years 54,380 15,336 69, 7 17
More than 5 years 38,840 6,071 4 4,9 11
Lease liabilities as lessee 112,444 27,133 1 3 9, 5 78
2025
Between 0 to 1 year 1 7,9 6 8 5,974 2 3 ,942
Between 1 to 5 years 56,311 16,613 7 2,9 24
More than 5 years 45,166 8,001 53,167
Lease liabilities as lessee 119,4 4 5 30,588 150,033
63Steel & Tube Annual Report 2026
Notes to the Financial Statements
For the year ended 30 June 2026
This section includes details of the group's cash, borrowings and capital reserves which provide funds for current and future activities.
D1 : Borrowings
20262025
$000$000
Trade Loan facility – current 20,000 20,000
Revolving Term & Cash Advance facility – non current 40,000 30,000
Bank loans 60,000 50,000
Key Policy
Borrowings are recognised initially at fair value and net of transaction costs incurred. Borrowings are subsequently stated at
amortised cost and any difference between the net proceeds and redemption value is recognised in profit or loss over the
period of the borrowings using the effective interest method. The movement in borrowings shown in the Statement of Cash
Flows is the net of repayments and drawdowns of borrowings. Borrowings are classified as current liabilities if there is no right
to defer settlement for greater than 12 months. The group is required to comply with certain financial covenants.
The group has in place committed bank borrowing facilities of $80m, comprising a $20m Revolving Cash Advance facility and a $30m
Revolving Term Advance facility with an expiry date of 4 September 2027, and a $30m Trade Loan facility with no expiry date and has
the effect of being repayable on demand. The interest rate is variable with reference to a base rate (BKBM bid rate) plus a margin.
Borrowing facilities arranged with the group’s banking partner can be drawn at any time, subject to meeting the terms of the group’s
Facility Agreement.
Both facilities are subject to compliance with covenants based on earnings and net debt tested periodically across the next twelve
months. If certain of these covenants are breached, this may result in an Event of Review under the facility. If the Event of Review
is not satisfactorily resolved, they may render the Revolving Term Advance facility and the Revolving Cash Advance facility payable
on demand.
The group had no events of review or default as at 30 June 2026. Accordingly, the drawn down amounts of the Revolving Cash
Advance Facility and the Revolving Term Advance Facility are classified as non-current at 30 June 2026 because the group has an
existing right to defer settlement for a period at least 12 months after the reporting period.
The group expects to negotiate new bank borrowing facilities when the current facilities expire. Refer to the Going Concern note for
commentary regarding the group's future covenant compliance.
FUNDING
SECTION D
64Steel & Tube Annual Report 2026
D2: Net Debt Reconciliation
Cash and cash
equivalentsBorrowings
Lease
liabilitiesTotal
$000$000$000$000
Net debt as at 1 July 2025 13,738 (50,000) (119,4 4 5) (155,707)
Cash flows(1,691) (10,000) 18,156 6,465
Non-cash movements - - (11,155) (11,155)
Net debt as at 30 June 2026 12,047 (60,000) (112,444) (160,397)
Net debt as at 1 July 2024 8,699 - (111,993) (103,294)
Cash flows 5,039 (50,000) 15,259 (29,702)
Non-cash movements - - (22,711) (22,711)
Net debt as at 30 June 2025 13,738 (50,000) (119,4 4 5) (155,707)
D3: Share Capital
The group’s capital includes share capital, treasury shares, reserves and retained earnings. The objectives for managing capital are to
safeguard the group’s ability to continue as a going concern, to provide returns and benefits for shareholders and other stakeholders
and to maintain a strong capital base for investor, creditor and market confidence. The group may adjust the dividends paid to
shareholders, return capital to shareholders, issue new shares or sell assets to maintain or adjust its capital structure.
Capital Structure Policy Targets
The group’s formal capital structure targets are as follows:
1. Net Debt: EBITDA less than 2.0x
2. Gearing ratio less than 30 – 35%
3. Dividend pay-out of between 60% - 80% of Net Profit After Tax (NPAT) adjusted for any significant non-trading items
2026 2025 2026 2025
Note$000 $000 SharesShares
Fully paid:
Balance at the beginning of the year 16 6,9 2 1 155,127 183,632,035 1 6 7, 3 8 5 ,9 2 3
Dividend reinvestment plan - 233 - 246,347
Employee share schemesE5 - 285 - 523,010
Shares issued relating to business combination - 11,298 - 15,476,755
Costs of issuing share capital - (22) - -
Balance at the end of the year 16 6,9 2 1 166,921 183,632,035 183,632,035
Ordinary shares are classified as equity. The holders of ordinary shares are entitled to receive dividends declared from time to time and
to one vote per share at meetings of the company.
65Steel & Tube Annual Report 2026
Notes to the Financial Statements
For the year ended 30 June 2026
This section contains additional notes and disclosures which do not form part of the primary sections but which are required to
comply with financial reporting standards:
• Financial instruments
• Provisions
• Contingent liabilities
• Auditor remuneration
• Related party and share based plans
• Subsequent events
• Other accounting policies
E1: Financial Instruments
Classification and subsequent measurement
On initial recognition, a financial asset is classified as subsequently measured at amortised cost, FVOCI (fair value through other
comprehensive income) or FVTPL (fair value through profit or loss). Financial assets are not reclassified subsequent to their initial
recognition unless the group changes its business model for managing financial assets, in which case all affected financial assets are
reclassified on the first day of the first reporting period following the change in the business model.
A financial asset is measured at amortised cost if it meets both of the following conditions and is not designated as FVTPL:
• It is held within a business model whose objective is to hold assets to collect contractual cash flows; and
• Its contractual terms give rise on specified dates to cash flows that are solely payments of principal and interest (SPPI) on the
principal amount outstanding
A debt investment is measured at FVOCI if it meets both of the following conditions and is not designated as FVTPL:
• It is held within a business model whose objective is achieved by both collecting contractual cash flows and selling financial assets;
and
• Its contractual terms give rise on specified dates to cash flows that are SPPI on the principal amount outstanding
All financial assets not classified as measured at amortised cost or FVOCI are measured at FVTPL. This includes all derivative financial
assets. Purchases and sales of financial assets are recognised on the date the group has committed to the transaction. Derecognition
of financial assets occurs when the rights to receive cash flows have expired or the group has transferred substantially all the risks and
rewards of ownership.
Financial liabilities are measured at amortised cost or FVTPL. A financial liability is measured at FVTPL if is classified as held-for-trading,
it is a derivative or it is designated as such on initial recognition. Financial liabilities at FVTPL are measured at fair value and net gains
and losses, including any interest expense, are recognised in profit or loss. Other financial liabilities are subsequently measured at
amortised cost under the effective interest method. Interest expense and foreign exchange gains and losses are recognised in profit
or loss. Any gain or loss on derecognition is also recognised in profit or loss.
The group classifies its trade and other receivables and cash and cash equivalents as being measured at amortised cost, including
any expected credit loss allowance provisions. They are included in current assets, except for those with maturities greater than 12
months after the end of the reporting period, these are classified as non-current assets. The group classifies its loan receivable as
being measured at FVTPL, as it does not meet the criteria for amortised cost or FVOCI. The asset is subsequently measured at fair
value. Net gains and losses, including any interest or dividend income, are recognised in the profit or loss.
Derivatives are measured at fair value. The portion of any fair value movement that is an effective hedge is measured in other
comprehensive income, but any ineffective portion is included in profit or loss.
OTHER
SECTION E
66Steel & Tube Annual Report 2026
Accounting classification of financial instruments
2026
Financial assets
at amortised
cost
Financial
liabilities at
amortised cost
Derivatives for
hedging at fair
value
Financial assets
at fair value
through profit
or loss
Financial
liabilities at fair
value through
profit or loss
Cash and cash equivalents 12,047 - - - -
Trade and other receivables excluding prepayments 61,556 - - - -
Derivative financial instruments - - 422 - -
Loan receivable - - - 1,693 -
Total financial assets 73,603 - 422 1,693 -
Borrowings - 60,000 - - -
Trade and other payables - 61,214 - - -
Derivative financial instruments - - - - -
Lease liabilities - 112,444 - - -
Contingent consideration liability - - - - 4,981
Total financial liabilities - 233,658 - - 4,981
2025
Cash and cash equivalents 13,738 - - - -
Trade and other receivables excluding prepayments 5 7,1 3 7 - - - -
Derivative financial instruments - - 1 - -
Loan receivable - - - 1,624 -
Total financial assets 70,875 - 1 1,624 -
Borrowings - 50,000 - - -
Trade and other payables - 47,875 - - -
Derivative financial instruments - - 1,069 - -
Lease liabilities - 119,4 4 5 - - -
Contingent consideration liability - - - - 4,989
Total financial liabilities - 2 1 7, 3 2 0 1,069 - 4,989
Measurement of fair values
The following table shows the valuation techniques used in measuring Level 2 and Level 3 fair values for financial instruments in the
balance sheet, as well as the significant unobservable inputs used.
Ty p eValuation technique
Significant
unobservable inputs
Inter-relationship between
significant unobservable inputs
and fair value measurement
Contingent
consideration
Discounted cash flows: The
valuation model considers the
present value of the expected
future payments, discounted
using a risk-adjusted discount
rate
Expected cash flows
(30 June 2026: $6.0m)
Risk-adjusted discount rate
( 30 June 2026: 10.2%)
The estimated fair value would
increase/(decrease) if:
• The expected cash flows were
higher/(lower); or
• The risk-adjusted discount
rate were lower/(higher)
Derivative financial
instruments (Forward
exchange contracts)
Forward pricing: The fair value
is determined using forward
exchange rates that are quoted
in an active market at the
reporting date
Not applicableNot applicable
Cash and cash equivalents comprise cash in bank balances and cash on hand. Loan receivable includes an equity option and is
measured at fair value, based on unobservable inputs.
67Steel & Tube Annual Report 2026
Financial risk management
The group is exposed to financial risk: market risk, credit risk and liquidity risk.
The group’s Treasury Policy is approved by the board and is reviewed every four years. The Treasury Policy establishes principles and
risk tolerance levels to guide management in carrying out risk management activities to minimise potential adverse effects on the
financial performance of the group. Compliance with policy is monitored and reviewed on a monthly basis.
i. Market risk
Market risk is the risk that changes in market price (e.g. foreign exchange rates and interest rates) will affect the group's income or the
value of its holdings of financial instruments. The object of market risk management is to manage and control market risk exposures
within acceptable parameters, while optimising the return.
Foreign exchange risk
The group is exposed to foreign exchange risk arising mainly from overseas purchases of inventory. In accordance with its Treasury
Policy, committed overseas purchase orders are hedged using forward foreign exchange contracts where payment is made in a
foreign currency. The group qualifies for hedge accounting. All of the forward exchange contracts have maturities of less than
one year at the balance date. The effective portion of the changes in fair value is recognised in other comprehensive income and
accumulated in the hedging reserve in equity as described in section E7.
As at balance date, foreign exchange contracts recorded as assets were $0.42m (2025: $0.001m) and as liabilities were $0.0001m
(2025: $1.07m). The notional value of foreign exchange contracts in place as at 30 June 2026 totalled $10.66m (2025: $24.40m).
The fair value of the foreign currency forward exchange contracts is as shown on the Balance Sheet.
The following table summarises the sensitivity of the group to foreign exchange risk. There would be no impact on profit or loss, as
the group qualifies for hedge accounting and all hedges are 100% effective at balance date. A sensitivity of +/- 5% has been selected
against foreign currencies (primarily US dollar). The group believes that this is reasonably possible given the exchange rate volatility
observed on a historical basis. All variables other than the applicable exchange rates are held constant:
2026 2025
NZ$m-5%+5%-5%+5%
Foreign exchange rate change
Impact on hedging reserves (within equity)(0. 51) 0.61 (1.05) 1.29
Interest rate risk
Interest rate risk is the risk that the value of the group’s assets and liabilities will fluctuate due to changes in market interest rates.
The group is exposed to interest rate risk through its drawings under the Group’s bank borrowing facilities at variable interest rates.
ii. Credit risk
The group is exposed to the risk of customers being unable to pay their debts as they fall due. The maximum exposure is the total
value of these balances. Customers who trade on credit terms are subject to credit verification procedures and credit limits are set for
each customer. The group’s credit policy is monitored regularly. There are no significant concentrations of credit risk in the current or
prior years.
The group also has credit risk in respect of financial institutions that hold the group’s cash. These institutions have credit ratings of AA-.
iii. Liquidity risk
The group manages its liquidity risk by maintaining availability of sufficient cash and funding via an adequate amount of committed
bank borrowing facilities. Owing to the nature of the underlying business, the group aims to maintain funding flexibility through
committed credit lines. The group monitors actual and forecast cash flows on a regular basis and rearranges credit facilities where
appropriate.
The table below summarises the group’s financial liabilities and derivative financial instruments into maturity groupings based on the
remaining period from balance date to the contractual maturity date. The amounts disclosed are the contractual undiscounted cash
flows.
68Steel & Tube Annual Report 2026
Contractual cash flows
2026
Carrying
value
$000
6 months
or less
$000
6 to 12
months
$000
1 to 3
years
$000
Total
$000
Borrowings 60,000 20,000 - 40,000 60,000
Trade payables & accruals 66,195 61,214 - 4,981 66,195
Cash flow hedging of derivatives:
Outflow 10,660 10,660 - - 10,660
Inflow(11,082) (11,082) - - (11,082)
125,773 80,792 - 4 4,981 125,773
2025
Borrowings 50,000 20,000 - 30,000 50,000
Trade payables & accruals 47,875 42,371 - 5,504 47,875
Cash flow hedging of derivatives:
Outflow 24,398 24,398 - - 24,398
Inflow(2 3, 330) (2 3, 330) - - (2 3, 330)
98 ,94 3 63,439 - 35,504 98 ,94 3
E2: Provisions
Restructure
Provision
Make Good
Provision
Other
ProvisionsTotal
$000 $000 $000 $000
Opening balance as at 1 July 2025 - 1,783 93 1,876
Additions 372 90 - 462
Used - - (9 3) (9 3)
Unutilised - (47) - (47)
Closing balance as at 30 June 2026 372 1,826 - 2,198
Current 372 150 - 522
Non Current - 1,676 - 1,676
Closing balance as at 30 June 2026 372 1,826 - 2,198
Key Policy
Provisions are recognised when the group has a present obligation (legal or constructive) as a result of a past event.
This occurs when it is probable that a cost will be incurred to settle the obligation and a reliable estimate can be made of
that obligation. Where material, provisions are determined by discounting the expected cash flows at a pre-tax rate that
reflects current market assessments of the time value of money. Where discounting is used, the increase in the provision
due to the passage of time is recognised as an expense.
• Restructuring Provision - Costs included within this provision relate to committed restructuring activities, and is expected to be
utilised in the next financial year
• Make Good Provision on existing tenanted properties - No costs relating to make good activities were undertaken during the
current financial year. Actual payment dates and costs will be known once each lease reaches its expiry date
• Other Provisions - relates to a provision for committed health & safety costs, fully utilised in the current year
69Steel & Tube Annual Report 2026
E3: Contingent Liabilities
Indemnities given to the group’s banking partner in respect of performance bonds were $1.2m (2025: $0.6m) at balance
date and were transacted in the ordinary course of business. These relate to performance guarantees held primarily for the
construction contracts entered into by the group.
E4: Auditor Remuneration
20262025
Fees paid to auditors (KPMG)$000 $000
Audit or review of financial statements
Audit of financial statements 503 439
Review of financial statements - 65
Total fees for services provided by KPMG 503 504
70Steel & Tube Annual Report 2026
E5: Related Party and Share Based Plans
The group has related party relationships with its controlled entities and with key management personnel.
The subsidiaries in the group are:
2026 2025
SubsidiariesPrincipal ActivityBalance DateHoldingHolding
Composite Floor Decks Holdings LimitedNon-trading30 June100%100%
Studwelders LimitedNon-trading30 June100%100%
S & T Plastics LimitedNon-trading30 June100%100%
S & T Stainless LimitedNon-trading30 June100%100%
Manufacturing Suppliers LimitedNon-trading30 June100%100%
Composite Floor Decks LimitedFloor Decking Installer30 June100%100%
Steel & Tube Galvanising LimitedManagement and employment services30 June100%100%
2026 2025
Transactions with Key Management Personnel$000 $000
Short-term benefits 4,9 9 1 4,9 76
Share-based benefits (accounting expense) 573 504
Termination benefits 397 -
5,961 5,480
The key management personnel are the non-executive directors and executive management. Included in short term benefits are
directors’ fees of $0.6m (2025: $0.6m). The aggregate value of sales and purchases transacted with key management personnel in the
current financial year amounts to $0.6k (2025: $10k) and $55k (2025: $8k) respectively.
Other Transactions with Related Parties
Certain directors, shareholders and management have relevant interests in a number of companies with which the group has
transactions in the normal course of the business. A number of the group's directors are also non-executive directors of other
companies, and a register of directors' interests is maintained. Any transactions undertaken with these entities have been entered
into in the normal course of business.
Certain directors and management hold shares in the group and receive dividends in the normal course of business.
71Steel & Tube Annual Report 2026
Performance Rights Plan 2017
In February 2018, a new Executive share plan was approved by the board, known as the Performance Rights Plan 2017 (PRP).
The performance period for this scheme runs for 3 years and comprises two performance conditions (50% each) as follows:
a) The Benchmark Comparator (BC) ranks the company’s Total Shareholder Return (TSR) relative to the TSR of the NZX 50 Index
securities
• Where the company TSR equals the 50th percentile TSR of the Index Companies over the Performance Period, 50% of (BC)
Performance Rights will vest
• Where the company TSR equals or exceeds the 75th percentile TSR of the Index Companies over the Performance Period, 100% of
(BC) Performance Rights will vest
• Where the company’s TSR over the Performance Period exceeds the 50th percentile TSR of the Index Companies but does
not reach the 75th percentile, then between 50% and 100% of the (BC) Performance Rights, will vest as determined on a linear
pro-rata basis
b) The Absolute Comparator (AC) ranks the company’s TSR relative to the company’s Cost of Equity (CoE) plus a premium of 2%
annualised and compounding
• Where the company TSR is less than or equal to CoE, no (AC) Performance Rights will be vested
• Where the company TSR is equal to or greater than CoE + 2%, 100% of (AC) Performance Rights will vest
• Where the company TSR is greater than CoE but less than (CoE) + 2%, then between 50% and 100% of the (AC) Performance Rights
will vest as determined on a linear pro-rata basis.
Performance Rights are only able to be exercised after completion of the three year performance period, providing and only to the
extent that the performance conditions, and other relevant service and non-market performance conditions, have been satisfied.
An additional Tranche 9 PRP scheme was issued during the current financial year. The Performance Rights for this scheme are only
able to be exercised, provided that the non-market performance conditions have been satisfied at the end of the three year period.
Any Benchmark and Absolute Comparator Performance Rights that do not vest at the Measurement Date will lapse.
During the year the following movements of rights to shares occurred in accordance with the rules of the share plans:
No. of Rights
Available
No. of Rights
Available
20262025
Opening balance 3,572,054 3,046,283
New shares granted 3,122,303 1,582,702
Rights forfeited(7 14,9 3 1) (10,916)
Rights vested - (52 3,010)
Rights lapsed(748,341) (523,005)
To t a l 5,231,085 3,572,054
Rights Performance Conditions Start DateExpiry date
Issue date
fair value
Total Rights
Issued
Rights
Available
30 June 2026
Rights
Available
30 June 2025
5 September 2022 - Tranche 65/09/202 5$1.43 975,896 - 7 5 7, 5 8 8
4 September 2023 - Tranche 74/09/2026$1.10 1,336,818 1,045,810 1,231,764
9 September 2024 - Tranche 89/09/202 7$ 0.98 1,596,019 1,360,149 1,582,702
8 September 2025 - Tranche 98/09/2028$0.69 2,922,303 2,625,126 -
30 October 2025 - Tranche 930/10/2028$0.71 200,000 200,000 -
To t a l 7,031,036 5,231,085 3,572,054
Weighted average remaining contractual life of options outstanding at end of period 1.51 1.40
2026 2025
$000 $000
Share-based benefits (accounting expense) 657 670
72Steel & Tube Annual Report 2026
The fair value of rights is determined using a Monte Carlo share price simulation model. The significant inputs into the model for
shares granted during the period were the market share price at grant date, an exercise price of zero (as shares are issued to the
employees at nil consideration on vesting), volatility of 23.6%, expected option life of between 1 and 3 years and an annual risk free
interest rate of 3.1%. Volatility has been calculated based on the annualised volatility for the three years prior to the rights issue.
Key Policy
The Performance Rights Plan 2017 is considered to be an equity settled scheme under NZ IFRS 2 Share-based Payment and
the vesting conditions for the scheme include both service and performance conditions.
Performance Rights Plan 2017
The cost associated with this plan is measured at fair value at grant date and is recognised as an expense in profit or loss over
the vesting period, with a corresponding entry to the reserve in equity. The estimate of the number of rights for which the
service conditions are expected to be satisfied is revised at each reporting date, with any cumulative catch-up adjustment
recognised in profit or loss in the period that the change in estimate occurred. Any rights not vested after the expiry of three
years are cancelled.
E6: Subsequent Events
Subsequent to year end, the board has approved, subject to the outcome of employee consultation, the closure of the Reinforcing
and Wire operations and the Plate Processing operations. The closures are expected to be completed during the next financial year.
In relation to the Reinforcing and Wire operations, the group has received a non-binding expression of interest from a potential
purchaser to acquire certain property, plant and equipment and key contracts. No binding sale agreement has been entered into as
at the date these financial statements were authorised for issue.
The financial impact of the closures and any subsequent asset disposals remains subject to the outcome of the sale processes and
cannot yet be reliably estimated.
73Steel & Tube Annual Report 2026
E7: Other accounting policies
Basis of consolidation
The group applies the acquisition method to account for business combinations. The group financial statements comprise the
financial statements of Steel & Tube Holdings Limited and its controlled entities (subsidiaries) (see Note E5).
The group controls an entity when the group is exposed to, or has rights to variable returns from its involvement with the entity and
has the ability to affect those returns through its power to direct the activities of the entity. Subsidiaries are consolidated from the
date on which control is transferred to the group and deconsolidated from the date control ceases.
Consideration transferred is the fair value of assets transferred, liabilities incurred to the former owners of the acquiree and equity
interests issued by the group. Consideration transferred also includes the fair value of any asset or liability resulting from a contingent
consideration arrangement. Identifiable assets acquired and liabilities (including contingent liabilities) assumed in a business
combination are measured initially at their fair values at acquisition date.
All inter-company transactions and balances between group companies are eliminated.
Foreign currency
Transactions in foreign currencies are translated at the foreign exchange rate at the date of the transaction. Gains and losses resulting
from the settlement of such transactions and from translation of monetary assets and liabilities at balance date are recognised in
profit or loss except when deferred in equity as qualifying cash flow hedges. The group’s hedging largely comprises cash flow hedges
for future purchases of inventory. The group’s current practice is to recognise the accumulated gains or losses on the hedging
instrument/derivative against the carrying value of the inventory when inventory is recognised.
Derivatives - Cash flow hedge
The group uses derivative financial instruments to hedge its exposure to foreign exchange risks arising from operational, financing
and investing activities. In accordance with its Treasury Policy, the group does not hold or issue derivative financial instruments for
trading purposes. Derivative financial instruments are recognised initially at fair value on the date a derivative contract is entered into.
Subsequent to initial recognition, derivatives are re-measured at fair value.
The group designates certain derivatives as hedges of a highly probable forecast transaction (cash flow hedge). The effective
portion of changes in the fair value of derivatives designated as cash flow hedges is recognised in equity. The gain or loss on the
ineffective portion is recognised in profit or loss in other gains/(losses). When the hedged item is a non-financial asset (for example,
inventory or property, plant and equipment) the amount recognised in equity is transferred to the carrying amount of the asset
when it is recognised. In other cases the amount recognised in equity is transferred to profit or loss in the same period the hedged
item is recognised in the Statement of Profit or Loss and Other Comprehensive Income. If the hedging instrument no longer meets
the criteria for hedge accounting, expires, is sold, terminated or is exercised, any cumulative gain or loss previously recognised in
equity remains in equity until the forecast transaction is ultimately recognised in profit or loss. When a forecast transaction is no
longer expected to occur, the cumulative gain or loss reported in equity is immediately transferred to profit or loss within other
gains/(losses).
Derivative financial instruments are classified as current if expected to be settled within 12 months; otherwise, they are classified as
non-current.
Impairment of non-financial assets
Assets that have indefinite useful lives that are not subject to amortisation and intangible assets not yet available for use are tested
annually for impairment. Assets (including intangibles and property, plant and equipment) subject to amortisation and depreciation
are reviewed for impairment whenever events or changes in circumstances indicate the carrying amount may not be recoverable.
An impairment loss is recognised for the amount by which the asset’s carrying amount exceeds its recoverable amount.
The recoverable amount is the higher of an asset’s fair value, less costs to sell and value in use. For the purposes of assessing
impairment, assets are grouped at the lowest levels for which there are separately identifiable cash flows (cash-generating units).
Revenue recognition
Revenue is measured based on the consideration specified in a contract with a customer. The group derives its revenue from the
distribution and processing of steel and associated products. Revenue is recognised when the group transfers control over products
and services to its customers.
74Steel & Tube Annual Report 2026
The table below shows the contract portfolios identified by the group and further information on the revenue recognition.
The grouping of the contract portfolios is based on assessment of certain contract characteristics for similarities. The effects on
the financial statements of these groupings is not expected to differ materially from applying NZ IFRS 15 to the individual contracts
(or performance obligations) within the portfolio. The group regularly undertakes a process to review the contracts’ characteristics
and assess the appropriate grouping of the contract portfolios. Characteristics considered may include identified risks, contract size
and duration, and contractual terms of the contracts.
Contract
PortfolioDescriptionKey JudgementsOutcomeTiming of Recognition
Cash or Credit
Supply Sales
Any sales from individual
orders without a formal
written contract.
No major judgement
required.
There is one performance
obligation, being the supply of the
product.
Point in time
Revenue is recognised at point of
sale when the product is delivered.
Key Supply and
Supply and
Installation
Sales
Any contracts that contain
supply and may contain
installation performance
obligations which the
group has assessed to have
similar risk characteristics.
Where the contract
contains installation
services, determining
whether or not the
supply and installation
components are “distinct”
within the context of the
contract.
There are two performance
obligations, being supply of the
product and installation of the
product.
Installation of the product is
considered a distinct performance
obligation as supply only contracts
are also available on a stand-alone
basis.
Over time
Revenue relating to the supply
and where applicable, installation
performance obligations
are recognised on a stage of
completion basis based on the
input of labour and materials
costs, as this corresponds directly
with the value to the customer
of the group’s performance
completed to date.
Other Supply
and Installation
Sales
Any contracts that contain
supply and installation
performance obligations
and have not been
included in the ‘Key Supply
and Supply and Installation
Sales’ contract portfolio.
Determining whether
or not the supply and
installation components
are “distinct” within the
context of the contract.
There are two performance
obligations, being supply of the
product and installation of the
product.
Over time
Revenue relating to the supply
and where applicable, installation
performance obligations are
each recognised in the amount
to which the group has a right to
invoice under the terms of the
contract.
Other Supply
Only Sales
Any contracts/sales
agreements that only have
supply of steel product
clauses.
Determining whether
each act of supply should
be treated as a separate
performance obligation
within the contract.
There is one performance
obligation, being the act of the
supply. Irrespective of how many
supply events occur, the products
supplied are all highly interrelated
in that they all are required for
the same construction project,
and therefore represent a series
of distinct supply events which
are substantially the same and
use the same method to measure
progress towards completion.
They are therefore accounted
for as a single performance
obligation.
Over time
The products supplied are
required to be modified to a
significant extent and do not
create an asset with an alternative
use to the group. The group has
a right to consideration from
the customer in an amount that
corresponds directly with the
value to the customer of the
group’s performance completed
to date.
Revenue relating to ‘Other Supply
Only Sales’ is recognised in the
amount to which the group has a
right to invoice under the terms of
the contract.
The group has also utilised the practical expedients specified in NZ IFRS 15 Revenue from Contracts with Customers in respect of the
requirement to disclose the transaction price allocated to unsatisfied (or partially unsatisfied) performance obligations, where the
contract has an original expected duration of one year or less, or where the group has applied the practical expedient to recognise
revenue at the amount to which it has a right to invoice, which corresponds directly to the value to the customer of the group’s
performance completed to date. Any volume-based rebates extended to customers by the group are recognised as a deduction from
revenue, in line with the pattern of transfer of control of the relevant good or service to the customer, where payment is deemed to
be highly probable.
75Steel & Tube Annual Report 2026
New standards and interpretations issued and effective in the current period
The group adopted all mandatory new and amended NZ IFRS Standards and Interpretations in the current year. No other new
standards and interpretations issued and effective in the current period had a material impact on the group's financial statements.
New standards and interpretations issued and not yet effective
A number of new standards, amendments to standards and interpretations are effective for annual periods beginning on or after
1 July 2026. In April 2024, the International Accounting Standards Board issued IFRS 18 Presentation and Disclosure in Financial
Statements, which is effective for accounting periods beginning on or after 1 January 2027. The impact of this standard is being
assessed by the group, however it is expected that the standard will affect the presentation of the financial statements. This standard
has not been early adopted in preparing these financial statements.
The group is currently assessing the impact of other new standards to the group to determine if they will have a significant impact on
future financial statements. On this basis, the group has not adopted and currently does not anticipate adopting, any standards prior
to their effective dates.
76Steel & Tube Annual Report 2026
© 2026 KPMG, a New Zealand Partnership and a member firm of the KPMG global organisation of independent member firms affiliated with KPMG International Limited,
a private English company limited by guarantee. All rights reserved.
Document classification: KPMG Public
Independent Auditor’s Report
To the Shareholders of Steel & Tube Holdings Limited
Report on the audit of the consolidated financial statements
Opinion
We have audited the accompanying consolidated
financial statements which comprise:
the balance sheet as at 30 June 2026;
the statements of profit or loss and other
comprehensive income, changes in equity and cash
flows for the year then ended; and
notes, including material accounting policy
information and other explanatory information.
In our opinion, the accompanying consolidated
financial statements of Steel & Tube Holdings Limited
(the Company) and its subsidiaries (the Group) on
pages 37 to 76 present fairly in all material respects:
- the Group’s financial position as at 30 June 2026
and its financial performance and cash flows for
the year ended on that date;
In accordance with New Zealand Equivalents to
International Financial Reporting Standards (NZ
IFRS) issued by the New Zealand Accounting
Standards Board and the International Financial
Reporting Standards issued by the International
Accounting Standards Board.
Basis for opinion
We conducted our audit in accordance with International Standards on Auditing (New Zealand) (ISAs (NZ)). We
believe that the audit evidence we have obtained is sufficient and appropriate to provide a basis for our opinion.
We are independent of Steel & Tube Holdings Limited in accordance with Professional and Ethical Standard 1
International Code of Ethics for Assurance Practitioners (Including International Independence Standards) (New
Zealand) issued by the New Zealand Auditing and Assurance Standards Board and the International Ethics
Standards Board for Accountants’ International Code of Ethics for Professional Accountants (including
International Independence Standards) (IESBA Code), as applicable to audits of financial statements of public
interest entities. We have also fulfilled our other ethical responsibilities in accordance with Professional and
Ethical Standards 1 and the IESBA Code.
Our responsibilities under ISAs (NZ) are further described in the Auditor’s responsibilities for the audit of the
consolidated financial statements section of our report.
Subject to certain restrictions, partners and employees of our firm may also deal with the Group on normal terms
within the ordinary course of trading activities of the business of the Group. These matters have not impaired our
independence as auditor of the Group. The firm has no other relationship with, or interest in, the Group.
Material uncertainty related to going concern
We draw attention to the Going Concern disclosure on pages 38 and 39 of the Group consolidated financial
statements. The Going Concern disclosure explains that compliance with banking covenants and maintaining
sufficient liquidity are highly sensitive to underlying assumptions relating to volumes and margin in the forecast
and its achievement and there is a material uncertainty concerning the Group’s ability to achieve its financial
forecasts and to achieve various initiatives underway. There is also material uncertainty relating to the Group’s
ability to maintain its banking relationships and to pursue further mitigants which include alternative sources of
borrowing, asset sales or further working capital management, if financial performance is below expectations.
77Steel & Tube Annual Report 2026
These events or conditions along with other matters set forth in the Going Concern disclosure, indicate that a
material uncertainty exists that may cast significant doubt on the Group’s ability to continue as a going concern.
Our opinion is not modified in respect of this matter.
In concluding there is a material uncertainty related to going concern we evaluated the extent of uncertainty
regarding events or conditions casting significant doubt in the Group’s assessment of going concern. This
included:
• Assessing the reasonableness of the FY27 forecast compared to historical performance and results since
year end, considering possible downside scenarios and their impact upon covenant compliance and
liquidity;
• Assessing significant initiatives, cost saving measures and proposed mitigants for feasibility, quantum and
timing. We used our knowledge of the client, its industry and the current status of those initiatives to assess
the level of uncertainty;
• Reading banking facility agreements, amendments and correspondence with existing and potential
financiers to understand the financing options available to the Group to assess the level of uncertainty, and
assess whether the requirements, including covenants, and repayment terms of the existing facility, were
appropriately considered in the financial forecasts;
• Evaluating the Group’s going concern disclosures in the financial report by comparing them to our
understanding of the matter, the events or conditions incorporated into the financial forecasts, the Group’s
plans to address those events or conditions, and accounting standard requirements. We specifically
focused on the principal matters giving rise to the material uncertainty.
Materiality
The scope of our audit was influenced by our application of materiality. Materiality helped us to determine the
nature, timing and extent of our audit procedures and to evaluate the effect of misstatements, both individually
and on the consolidated financial statements as a whole. The materiality for the consolidated financial statements
as a whole was set at $2.3m determined with reference to a benchmark of the Group’s total revenue. We chose
the benchmark because, in our view, this is a key measure of the Group’s performance.
Key audit matters
Key audit matters are those matters that, in our professional judgement, were of most significance in our audit of
the consolidated financial statements in the current period. Except for the matter described in the material
uncertainty related to going concern section of our report, we summarise below those matters and our key audit
procedures to address those matters in order that the Shareholders as a body may better understand the
process by which we arrived at our audit opinion.
Our procedures were undertaken in the context of and solely for the purpose of our audit opinion on the
consolidated financial statements as a whole and we do not express discrete opinions on separate elements of
the consolidated financial statements.
78Steel & Tube Annual Report 2026
The key audit matter How the matter was addressed in our audit
Impairment assessment
Refer to Note C2 to the financial
statements.
At 30 June 2026, the Group has
identified indicators of impairment by
comparison of the carrying value to
the market capitalisation. The Group
has assessed the recoverable amount
of its cash generating units (CGUs)
and recorded impairment of assets of
$51.9m relating to goodwill, right-of-
use assets, property, plant and
equipment and intangible assets within
the Distribution, Rollforming and
Reinforcing CGUs.
An impairment test has also been
performed for the Galvanizing CGU as
the CGU contains goodwill of $23.3m
with no impairment identified.
Impairment assessment is a key audit
matter, due to the inherent uncertainty
when estimating recoverable amount.
In particular, there is uncertainty in the
timing and scale of market recovery
and the resulting revenue, gross
margin and operating costs of the
CGUs.
Furthermore, the value of the recorded
impairment is highly sensitive to
changes in revenue growth
assumptions and gross margins. This
further increased our audit effort in this
key audit area.
Our procedures to evaluate the impairment assessment and resulting
impairment included;
• Assessing whether the methodology adopted was consistent with
the accepted valuation approaches of NZ IAS 36 Impairment of
Assets considering both the value in use and fair value less cost
of disposal models prepared by the Group;
• Evaluating the key assumptions within the models including:
o comparing the discount rates and terminal growth rates
applied to relevant benchmarks using KPMG valuation
specialists;
o evaluating the key cash flow assumptions by comparing to
historical trends, approved budgets, business plans and
where available, external market data as evidence of the
feasibility of the forecasts;
o challenging the above assumptions and judgements by
performing sensitivity analysis, considering a range of
outcomes based on various scenarios;
• Assessing the allocation of the resulting impairment charge to the
relevant asset classes and evaluating whether the impairment had
been recognised in accordance with the requirements of NZ IAS
36 Impairment of Assets;
• Considering the adequacy of the financial statement disclosure
particularly focusing on the disclosure of the recorded impairment
and disclosure of sensitivity of the impairment tests to reasonably
possible changes in key assumptions.
We have no material findings to report.
Other information
The directors, on behalf of the Group, are responsible for the other information. The other information comprises
information included in the Annual report, but does not include the financial statements and our auditor’s report
thereon.
Our opinion on the consolidated financial statements does not cover any other information and we do not
express any form of assurance conclusion thereon.
In connection with our audit of the consolidated financial statements our responsibility is to read the other
information and in doing so, consider whether the other information is materially inconsistent with the
consolidated financial statements or our knowledge obtained in the audit or otherwise appears materially
misstated.
If, based on the work we have performed, we conclude there is a material misstatement of this other information,
we are required to report that fact. We have nothing to report in this regard.
79Steel & Tube Annual Report 2026
Use of this independent auditor’s report
This independent auditor’s report is made solely to the Shareholders. Our audit work has been undertaken so
that we might state to the Shareholders those matters we are required to state to them in the independent
auditor’s report and for no other purpose. To the fullest extent permitted by law, none of KPMG, any entities
directly or indirectly controlled by KPMG, or any of their respective members or employees, accept or assume
any responsibility and deny all liability to anyone other than the Shareholders for our audit work, this independent
auditor’s report, or any of the opinions we have formed.
Responsibilities of directors for the consolidated financial
statements
The directors, on behalf of the Group, are responsible for:
— the preparation and fair presentation of the consolidated financial statements in accordance with NZ
IFRS issued by the New Zealand Accounting Standards Board and the International Financial Reporting
Standards issued by the International Accounting Standards Board;
— implementing the necessary internal control to enable the preparation of a consolidated set of financial
statements that is free from material misstatement, whether due to fraud or error; and
— assessing the ability of the Group to continue as a going concern. This includes disclosing, as
applicable, matters related to going concern and using the going concern basis of accounting unless
they either intend to liquidate or to cease operations or have no realistic alternative but to do so.
Auditor’s responsibilities for the audit of the consolidated
financial statements
Our objective is:
— to obtain reasonable assurance about whether the financial statements as a whole are free from
material misstatement, whether due to fraud or error; and
— to issue an independent auditor’s report that includes our opinion.
Reasonable assurance is a high level of assurance but it is not a guarantee that an audit conducted in
accordance with ISAs NZ will always detect a material misstatement when it exists.
Misstatements can arise from fraud or error. They are considered material if, individually or in the aggregate, they
could reasonably be expected to influence the economic decisions of users taken on the basis of the
consolidated financial statements.
A further description of our responsibilities for the audit of the consolidated financial statements is located at the
External Reporting Board (XRB) website at:
https://www.xrb.govt.nz/standards/assurance-standards/auditors-responsibilities/audit-report-1-1/
This description forms part of our independent auditor’s report.
The engagement partner on the audit resulting in this independent auditor’s report is Laura Youdan.
For and on behalf of:
KPMG
Auckland
25 August 2026
80Steel & Tube Annual Report 2026
Corporate governance at Steel & Tube is predicated on high standards of ethics and performance and is achieved through robust
governance policies, practices and processes to ensure a culture that is open, transparent and focussed on adding value for
stakeholders.
The board regularly reviews Steel & Tube‘s governance structures and processes to identify opportunities for enhancement, ensure
they are consistent with best practice and reflect Steel & Tube’s operations.
The board believes that the company’s corporate governance framework materially complies with the NZX Corporate Governance
Code (the Code). A summary of Steel & Tube’s governance actions and performance against each of the Principles in the Code is
detailed on the following pages.
The information in this report is current as at 25 August 2026 and has been approved by the board of Steel & Tube.
1. Ethical Standards
1.1 Code of Ethics
Steel & Tube’s directors and team members are expected to act with integrity and professionalism and undertake their duties
in the best interests of the company, taking into account the interest of shareholders and other stakeholders. The board has
adopted a Code of Ethics, which is available on the company website and staff intranet. Steel & Tube’s policies also include
detailed standards of integrity, conduct and behaviour required of all employees. This forms part of the new employee induction
programme; alongside regular employee communications.
We encourage employees to speak out if they have concerns. The avenues for doing so are detailed in the company’s
Whistleblower Policy which is on the company website.
Steel & Tube did not donate to any political parties in FY26.
1.2 Insider Trading Policy
Steel & Tube has an Insider Trading Policy which, along with the Financial Markets Conduct Act 2013, imposes limitations and
requirements on directors and employees in dealing in the company’s shares. These limitations prohibit dealing in shares while
in possession of inside information and impose requirements for seeking consent to trade.
While there is no formal requirement to do so, all directors hold shares in the company either directly or through affiliates.
Details of directors’ share dealings are set out on page 98 of this report.
2. Board Composition And Performance
2.1 Board Charter
The roles and responsibilities of the board are detailed in the Board Charter, which is reviewed at least every three years and is
available on the company website. The board’s primary objective is to enhance shareholder value and protect the interests of
other stakeholders by improving corporate performance and accountability.
The board has delegated authority for the day to day management of the business to the CEO and the wider senior
management team with specified financial and non-financial limits. A formal Delegated Authorities Policy documents delegated
authorities and is reviewed annually by the board.
2.2 Nomination and Appointment of Directors
Membership, rotation and retirement of directors is determined in accordance with the company constitution and NZX Listing
Rules.
The board considers director succession on a regular basis, considering such things as tenure, experience and director
workload. All current directors are considered to offer valuable and complementary skill sets. Importantly, the majority of Steel
& Tube’s directors have either worked in or held governance positions within the sector.
The Nominations Committee has delegated responsibility from the board to make recommendations on board composition and
nominations, subject to the company constitution.
GOVERNANCE
81Steel & Tube Annual Report 2026
Directors will retire and may stand for re-election by shareholders at least every three years, in accordance with the NZX
Listing Rules. A director appointed since the previous Annual Shareholders’ Meeting holds office only until the next Annual
Shareholders’ Meeting but is eligible for election at that meeting.
Shareholders may also nominate candidates for election to the board. The board asks for director nominations each year prior
to the Annual Shareholders’ Meeting, in accordance with the company constitution and the NZX Listing Rules.
The board has developed a skills matrix and takes into account a number of factors including qualifications, experience and skills
when making directorship recommendations to the shareholders. The collective capability of the current board is assessed
against these requirements and the search then focuses on finding a board member who will best complement the current mix
of capabilities on the board. The board may engage consultants to assist in the identification, recruitment and appointment of
suitable candidates.
Key information is provided to shareholders when a director stands for election or re-election.
2.3 Written Agreements
The company has written agreements with each director, outlining the terms of their appointment. The board is satisfied
that each director has the necessary time available to devote to the position, broadens the board’s expertise and has the
competencies to ensure the effective functioning of the board.
The company has arranged a policy of directors’ and officers’ liability insurance. This policy covers the directors and officers
so that any monetary loss suffered by them, as a result of actions undertaken by them as directors or officers, is insured to
specified limits (and subject to legal requirements and/or restrictions).
2.4 Director Information
As at the date of this report, the board comprises five independent directors, who have significant relevant industry and market
experience, skills and expertise that are of value to the company. Steve Reindler decided to retire effective 1 September 2026.
Two new directors have been appointed from 1 September 2026.
Profiles of directors are available on the company website and are included in the Annual Report. Directors’ interests are
disclosed on page 97 of the Annual Report.
Director independence is determined in accordance with NZX Listing Rules and with regard to the factors described in Table
2.4 of the NZX Corporate Governance Code. The board has determined that all current directors are independent and have no
disqualifying relationships.
Directors are required to notify the company of any interests they have that could impact an assessment of their independence
or their ability to act in the best interests of Steel & Tube. Steel & Tube has processes in place to manage any conflicts of interest
with directors.
82Steel & Tube Annual Report 2026
The table below shows the skills for the current directors, as of 25 August 2026. John Beveridge served as director until the company’s
Annual Meeting on 22 October 2025, at which time he stepped down from the board.
Susan
Paterson
Steve
Reindler
Chris
Ellis
Karen
Jordan
Andrew
Flavell
Appointed
Jan 2017
Chair and
Independent
Director
Aug 2017
Independent
Director
Sep 2017
Independent
Director
Dec 2020
Independent
Director
Oct 2021
Independent
Director
CompetencyElements
Industry & Commercial Capability
Operations Manufacturing/processing, construction,
multi-site networks, distribution, supply
chain, health & safety
IndustryProduct knowledge of steel and other
metals
Customer & SalesCustomer strategy, B2B sales, marketing,
customer experience, industry
relationships
Commercial AcumenCommercial decision making, financial risk
management and controls
Mergers, Acquisitions
& Capital Allocation
Investment evaluation, acquisitions,
integration and capital deployment
Governance & Risk
Governance & Listed
Company Experience
Board governance, NZX oversight,
stakeholder management, governance
frameworks
Risk ManagementEnterprise risk, security, operational and
strategic risk
Sustainability & ESGEnvironmental, social and governance
oversight
Legal & Regulatory
Oversight
Compliance, regulatory frameworks,
assurance
People & Leadership
People & CultureTalent, succession, organisational
performance, remuneration, culture and
engagement
Stakeholder
Relationships
Investors, regulators, customers, industry
bodies
Future-Focused Capability
StrategyStrategy development, identification of
emerging trends and opportunities
Technology & DigitalTechnology strategy, digital and AI
transformation
Transformation
Transformative business change
Rating Scale
High Significant skills, expertise and governance experience
Moderate Strong working knowledge and relevant experience
83Steel & Tube Annual Report 2026
Board meetings are scheduled throughout the year, with other meetings to deal with certain matters arising from time to time
being held when necessary. The table below sets out director and committee member attendance at board and committee
meetings during FY26. There were 7 planned and 10 additional board meetings during the year. Additional meetings were held
to enable directors to consider and progress a range of initiatives to support the company’s financial performance.
BoardAudit & Risk
People &
CultureNominationQHSET
Total Number of Meetings173332
Susan Paterson1733
Steve Reindler17333
Chris Ellis17332
Karen Jordan16332
Andrew Flavell16232
John Beveridge*21
* John Beveridge stepped down from the Board on 22 October 2025.
Directors may attend any committee meeting on an ex-officio basis which is not recorded in the above table.
More information on Board committees is set out under the heading 'Principle 3'.
2.5 Diversity
Equality and diversity are cornerstones of Steel & Tube’s organisational culture, based on the belief that diversity is integral
to creating a collaborative workplace culture, competitive advantage and ultimately, sustainable business success. Diversity
provides a broad range of perspectives and experience that enhance the quality and depth of decision-making and helps create
a united team approach across all levels of the organisation.
The board encourages diversity and will not knowingly participate in business situations where Steel & Tube could be complicit
in human rights and labour standard abuses. The company’s approach to diversity is outlined in the Diversity and Inclusion
Policy, which is available on the company website.
Measurable objectives form part of the People & Culture plan each year and they are agreed and approved by the board.
A number of initiatives are in place to support diversity and achievement of Steel & Tube’s diversity and inclusion objectives.
The board believes the principles in the policy were adhered to in FY26.
Key areas of focus are:
• Recruitment and retention of a diverse workforce
• Fair and consistent reward and recognition
• Flexible working arrangements
• Employee engagement
• Agreed standards of conduct and behaviour
Steel & Tube has a diverse workforce, representing more than 30 different ethnicities. English is a second language for many
Steel & Tube team members. To create a safe and supportive working environment Steel & Tube translates documentation into
different languages and provides safety training which also helps improve numeracy and literacy levels.
The officers of the company (as defined by the NZX Listing Rules for the purposes of diversity reporting) are the CEO and
specific direct reports of the CEO having key functional responsibility, namely the CFO. As at 30 June 2026, females represented
29% of Directors and Officers of the Company (FY25: 25%).
84Steel & Tube Annual Report 2026
As at 30 JuneFY26 FemaleFY26 Male
FY26 Gender
DiverseFY25 FemaleFY25 Male
FY25 Gender
Diverse
Directors23-24-
Officers-2--2-
Overall workforce23%77%0%24%76%0%
2.6 Director Training and Education
Directors are encouraged to undertake appropriate training and education to ensure they remain current on how to best
perform their duties. In addition, management provides regular updates on relevant industry and company issues, including
briefings from senior executives. All directors are current members of New Zealand Institute of Directors.
All directors have access to executives to discuss issues or obtain information on specific areas in relation to matters to be
discussed at board meetings, or other areas as they consider appropriate. The board committees and directors, subject to the
approval of the board chair, have the right to seek independent professional advice at the company’s expense, to enable them
to carry out their responsibilities.
2.7 Board Performance and Review
The board monitors its own performance annually and from time to time commissions external reviews to assess the
performance of individual directors and the board’s effectiveness.
2.8 Independent Board Majority
All of Steel & Tube’s directors have been determined to be independent.
2.9 Independent Chair
Steel & Tube’s chair is required to be an independent director and is elected by the directors. Susan Paterson was appointed as
chair in January 2017 and is deemed to be independent.
2.10 Separation of the role of Chair and CEO
The board supports the separation of the roles of chair and CEO. Steel & Tube’s CEO, Mark Malpass is not a director on the
Steel & Tube board.
85Steel & Tube Annual Report 2026
3. Board Committees
The board has established several standing committees, each of which has a board-approved written charter summarising the
role, responsibilities, delegations and membership requirements.
Board committees assist the board by focussing on specific responsibilities in greater detail than is possible in board meetings.
However, the board retains ultimate responsibility for the functions of its committees and determines their responsibilities.
The board appoints the members and chair of each committee, with the committee chair reporting committee
recommendations to the board.
The board regularly reviews the charters of each board committee, the committees’ performance against those charters and
membership of each committee.
The board believes that committee charters, committee membership and roles of committee members comply with
recommendations in the Code.
Current membership of each of the board committees at 30 June 2026 is set out below.
CommitteeRoleMembers
Audit & Risk
Assist the board in its oversight of the integrity of financial
reporting, financial management and controls, external
audit quality and independence and the risk management
framework.
Karen Jordan (chair)
Susan Paterson
Steve Reindler
Andrew Flavell
People & CultureAssist the board to establish and maintain a strong governance
framework overseeing the management of the company’s
people, remuneration and diversity policies.
Steve Reindler (chair)
Susan Paterson
Chris Ellis
NominationAssist the board in ensuring appropriate board performance
and composition and in appointing directors.
Susan Paterson (chair)
Steve Reindler
Chris Ellis
Karen Jordan
Andrew Flavell
Quality, Health, Safety,
Environment and Training
Assist the board to meet its responsibilities in relation to the
company’s Quality, Health and Safety (H&S) and Environment
policies, procedures, and legislative compliance.
Chris Ellis (chair)
Karen Jordan
Andrew Flavell
3.1 Audit & Risk Committee
The board has an Audit & Risk committee which acts as a delegate of the board on financial reporting, internal control and risk
management issues. The committee also assists the board with monitoring and reporting the company’s strategies, activities
and performance regarding sustainability, social responsibility and the environment. There are a minimum of three members,
who are all independent directors.
The committee is currently made up of four independent directors. The chair of the committee, Karen Jordan, is not the chair
of the board, is independent and has significant accounting and financial expertise. The remaining committee members have a
range of qualifications and are all experienced in commercial and operational matters.
The role and responsibilities of the committee are detailed in a written charter which is available on Steel & Tube’s website.
86Steel & Tube Annual Report 2026
3.2 Employee attendance at Audit & Risk Committee meetings
Employee attendance at committee meetings is by invitation only.
3.3 People & Culture Committee
The People & Culture committee assists the board to establish and maintain a strong governance framework overseeing the
management of the company’s people, remuneration and diversity policies. All members of the committee are independent
directors, and it operates to a written charter which is available on Steel & Tube’s website.
3.4 Nomination Committee
The Nomination committee assists the board in ensuring appropriate board performance and composition and in appointing
directors. The nomination procedures include consideration of the independence of director candidates. All members of the
committee are independent directors, and it operates to a written charter which is available on Steel & Tube’s website.
3.5 Quality, Health & Safety, Environment and Training Committee
The Quality, Health & Safety, Environment and Training committee assists the board to meet its responsibilities in relation to
the company’s Quality, Health and Safety and Environment policies, procedures, and legislative compliance. All members of the
committee are independent directors, and it operates to a written charter which is available on Steel & Tube’s website.
3.6 Control Transaction Protocols
In the case of a control transaction, Steel & Tube would follow its Takeover Protocol including forming a committee comprised
of non-conflicted non-executive Directors. This committee will have oversight in respect of the control transaction and ensure
compliance with the company's legal obligations and strict process separation and independence from interested Directors.
The composition of the committee would be disclosed at the time the bid is made public.
4. Reporting And Disclosure
4.1 Continuous Disclosure Policy
Steel & Tube is committed to keeping investors and the market informed of all material information about the company and its
performance, in a timely manner. In addition to all information required by law, the company also seeks to provide sufficient
meaningful information to ensure stakeholders and investors are well informed.
Steel & Tube is committed to providing accurate, timely, consistent and reliable disclosure of information to ensure market
participants have fair access to information that may impact on its share price. The company’s Continuous Disclosure Policy sets
out the principles and requirements of this commitment to timely disclosures.
4.2 Access to Key Governance Policies
Easy access to information about Steel & Tube, including financial and operational information and key corporate governance
policies and charters, is available through the company website at www.steelandtube.co.nz.
4.3 Financial Reporting
The board is responsible for ensuring that the financial statements give a true and fair view of the financial position of the
company and have been prepared using appropriate accounting policies, consistently applied and supported by reasonable
judgements and estimates. The board is also responsible for ensuring all relevant financial reporting and accounting standards
have been followed.
87Steel & Tube Annual Report 2026
The Audit & Risk committee oversees the quality and integrity of external financial reporting, including the accuracy,
completeness, balance and timeliness of financial statements. It reviews Steel & Tube’s full and half year financial statements
and makes recommendations to the board concerning accounting policies, areas of judgement, compliance with accounting
standards, stock exchange and legal requirements, and the results of the external audit. All matters required to be addressed,
and for which the committee has responsibility, were addressed during the reporting period.
For the financial year ended 30 June 2026, the directors believe that proper accounting records have been kept which enable,
with reasonable accuracy, the determination of the financial position of the company and facilitate the compliance of the
financial statements with the Financial Markets Conduct Act 2013.
4.4 Non-financial Reporting
Steel & Tube has a commitment to ensuring that the company adds value for all its stakeholders, from shareholders to staff and
the communities the company operates in, as well as reducing the environmental impact of the company’s activities.
Steel & Tube believes it is the company’s corporate responsibility to ensure the company plays its part in making the world a
better place.
Health and safety and other non-financial metrics are reported in the Annual Report and other investor communications
annually.
Environmental, social and governance (ESG) principles have been identified which will enhance Steel & Tube and support the
company’s growth. Oversight of ESG is set out in Steel & Tube’s Sustainability Policy.
Climate-related Disclosures
The pending amendments to the climate reporting legislation will mean that Steel & Tube will not be required to prepare
climate reporting as our market capitalisation is under the new $1bn market capitalisation threshold. Steel & Tube has elected
to discontinue the publication of a formal Climate-Related Disclosures report, however, will continue to monitor and track key
metrics including Scope 1 and 2 emissions.
5. Remuneration
Remuneration of directors and senior executives is the key responsibility of the People & Culture committee.
The framework for the determination and payment of directors and senior executives’ remuneration is set out in Steel & Tube’s
Remuneration Policy. External advice is sought on a regular basis to ensure remuneration is benchmarked to the market for
senior management positions, directors and board committee positions.
Details of director and executive remuneration in FY26 are provided on pages 93 to 96.
5.1 Directors’ Remuneration
Shareholders fix the total remuneration available for directors. Approval is sought for any increase in the pool available to pay
directors’ fees, and any recommendations to shareholders regarding director remuneration are provided for approval in a
transparent manner. If independent advice is sought by the board, it will be disclosed to shareholders as part of the approval
process.
The last increase in director remuneration was approved by shareholders at the Annual Meeting in September 2022, for a total
fee pool of $642,500. Total fees paid in FY26 were $549,925.
Board policy is that no sum is paid to a director upon retirement or cessation of office.
While there is no formal requirement to do so, the directors are expected to hold shares. Currently, all directors hold at least
1,000 shares in the company either personally or through affiliates.
Directors’ share dealings and interests in the company are detailed on pages 97 to 98.
Remuneration for each board role as at 30 June 2026 is as follows. Specific payments made to each director during FY26, as well
as other related information, is set out in the Remuneration Report on page 93.
88Steel & Tube Annual Report 2026
RoleFee
Chair$165,000
Director
$ 8 7, 5 0 0
Committee Chair – Audit & Risk, QHSET$15,000
Committee Chair – People & Culture$10,000
5.2 and 5.3 Executive and CEO Remuneration
Steel & Tube’s executive remuneration policies and practices are designed to attract, retain and motivate high calibre people
and create a performance-focussed culture. Details of executive and CEO Remuneration are set out in the Remuneration Report
on pages 93 to 96.
6. Risk Management
6.1 Risk Management Framework
Steel & Tube’s ability to deliver appropriate returns to its shareholders requires successful execution of business strategy and the
elimination, reduction and mitigation of associated risks. Effective risk management principles are applied across each Business
Unit to ensure risk is identified, assessed, categorised and ranked to allow the business to understand its risks.
The board has overall responsibility for the establishment and oversight of the group’s risk management framework.
The board is responsible for overseeing and monitoring significant business risks and overseeing management’s processes to
mitigate the identified risks.
Key risks are owned by members of the executive leadership team. This promotes integration into operations and planning
and a culture of proactive risk management. Management regularly reports to the board on significant business risks and
treatments for those risks. Legislative compliance is monitored across each Business Unit through a bi-annual legal compliance
management survey and site compliance schedule questionnaires completed monthly.
The company is exposed to risks from a number of sources, including operational, strategic, economic and financial risks.
Steel & Tube’s risk management framework incorporates policies, procedures and appropriate internal controls to identify,
assess and manage areas of significant business and financial risks.
Key risks are assessed on a risk profile identifying the likelihood of occurrence and potential severity of impact; and are
managed with a focus on decreasing the risk likelihood and minimising the risk impact should it occur. Steel & Tube maintains
insurance policies that it considers adequate and practicable to meet its insurable risks.
89Steel & Tube Annual Report 2026
Key risk areas include:
Key RiskDescriptionMitigation
Maintenance of Steel & Tube’s
values and culture
Deviation from the company’s core
values and culture could lead to ethical
and reputational issues
• Unified purpose focussed on making life
easy for customers
• Regular communication and reinforcement
of the company's values and culture
through inductions, training and workshops
• Monitoring of employee engagement
surveys and controls environment
Strategy executionIneffective implementation of
strategic initiatives leading to sub-
optimal performance and competitive
disadvantage
• Clearly defined strategic goals with
measurable objectives and key performance
indicators (KPIs)
• Clear responsibilities and accountability for
strategy implementation
• Regular progress monitoring and corrective
actions to address deviations from the plan
Quality of productsRisks associated with the production
and supply of substandard or faulty
products, leading to customer
dissatisfaction and potential product
under-performance and/or legal
liabilities
• Robust quality control processes
throughout the production chain
• Regular product testing to rigorous
standards
• Independent audits of supplier mills
• Internal audits and ISO certification and
compliance
• Maintaining compliance with industry
standards and regulations
Economic environment and
trading conditions
Exposure to economic fluctuations
impacting demand, pricing, and
overall financial performance
• Diversification of product offerings and
customer base to reduce dependency on
specific sectors
• Regular economic analysis and scenario
planning to anticipate and respond to
market changes
• Syndicated bank debt facility structure
• Active financial stewardship
90Steel & Tube Annual Report 2026
6.2 Quality, Health, Safety and Environment
The board is committed to ensuring a safe and healthy environment for all Steel & Tube people and anyone in the company’s
workplaces. Ensuring Steel & Tube employees and contractors go home safely every day is the number one priority.
The board is responsible for ensuring that the systems used to identify and manage health and safety risks are fit for purpose,
being effectively implemented, regularly reviewed and continuously improved. A mix of lead and lag indicators are reported,
and safety performance is tracked to identify patterns to help prevent incidents. Health and safety is reviewed at each board
meeting and the chair of the QHSET committee regularly provides updates to the board on committee proceedings.
20262025202420232022
Safety TRIFR3.433.500.001.141.13
Product Quality
Steel & Tube’s aim is to be the preferred New Zealand supplier for steel products and solutions and its expert people play an
important role in that, sharing their knowledge and experience with customers. Ensuring the quality of Steel & Tube’s products
remains a critical focus and an extensive Quality Management Programme is in place and overseen by the General Manager
Quality, Health, Safety and Environment.
More information on the company’s approach to Quality and Health & Safety is outlined on page 24.
7. Auditors
7.1 External Audit
Steel & Tube’s External Auditor Independence Policy outlines the commitment to ensuring audit independence, both in fact and
appearance, so that Steel & Tube’s external financial reporting is viewed as being highly objective and without bias.
For the year ended 30 June 2026, KPMG was the external auditor of Steel & Tube. KPMG was first appointed as auditor in 2021 for
the audit of the year ended 30 June 2022, with the next lead partner rotation due after the completion of the 30 June 2026 audit.
The Audit & Risk committee monitors the ongoing independence, quality and performance of the external auditors and
monitors audit partner rotation. The committee pre-approves any non-audit work undertaken by the external auditors.
There were no non-audit services provided by KPMG in FY26. The fees paid for audit services in FY26 is identified in Note E4 of
the Financial Report.
KPMG has provided the Steel & Tube board with written confirmation that, in their view, they were able to operate
independently during the year.
7.2 Attendance at Annual Meeting
It is Steel & Tube’s practice that the external auditors attend the Annual Shareholders' Meeting each year and are available to
answer questions from shareholders relevant to the audit.
7.3 Internal Audit
Steel & Tube operates an outsourced internal audit function, which reports to and is monitored by the Audit & Risk committee.
The committee approves the annual internal audit plan, receives internal audit review reports on the adequacy and effectiveness
of Steel & Tube’s internal controls and monitors the implementation of recommendations arising from the internal auditor’s
review findings.
During FY26, BDO acted as the company’s outsourced internal audit provider.
91Steel & Tube Annual Report 2026
8. Shareholder Rights And Relations
8.1 Investor website
Easy access to information about the performance of Steel & Tube is available through the Investor Centre on the company’s
website at www.steelandtube.co.nz/investor-centre.
8.2 Engagement with shareholders
Steel & Tube is committed to open and regular dialogue and engagement with shareholders. The company’s investor
relations programme includes semi-annual post-results briefings with investors, analysts and investor meetings, and earnings
announcements. In addition, semi-annual Shareholder Newsletters help to keep shareholders informed about the business and
the contribution the company makes to New Zealand’s economic development and prosperity. The programme is designed to
provide shareholders and other market participants the opportunity to obtain information, express views and ask questions.
Shareholders are encouraged to communicate with the company and its share registry electronically. Approximately 69% of
Steel & Tube’s shareholders have opted for email communications.
Steel & Tube endeavours to make it easy for shareholders to participate in Annual Shareholders’ Meetings, which are held in
a main centre, streamed live online and recorded and posted on the company website. Shareholders can ask questions and
express their views to the board, management and the external auditors at Annual Shareholders’ Meetings.
In addition to shareholders, Steel & Tube has a wide range of stakeholders and maintains open channels of communication for all
audiences, including the investing community and the New Zealand Shareholders’ Association, as well as its staff, suppliers and
customers.
8.3 Voting on major decisions
The board considers that shareholders should be entitled to vote on decisions that would change the essential nature of
Steel & Tube’s business. The board adopts the one share, one vote principle, conducting voting at shareholder meetings by poll.
Shareholders are also able to vote by proxy ahead of meetings without having to physically attend those meetings.
8.4 Equity offers
Steel & Tube did not undertake any capital raising during FY26. Should Steel & Tube consider raising additional capital, we
will structure the offer having regard to likely levels of shareholder participation and optimising and enhancing the ability to
maximise the level of capital raised. The board will look to give all shareholders an opportunity to participate in any capital
raising.
8.5 Notice of meeting
Steel & Tube aims to provide at least 20 working days of the notice of the Annual Shareholders Meeting, which is posted on
Steel & Tube’s website, announced on the NZX and sent to shareholders prior to the meeting each year. This goal was achieved
in 2025.
92Steel & Tube Annual Report 2026
Director Remuneration
As at 30 June 2026, the standard directors’ fees per annum were $165,000 for the chair and $87,500 for each non-executive director.
Board committee chairs also receive additional fees of between $10,000 – $15,000 for their committee responsibilities.
Directors’ fees exclude GST, where applicable. Directors are entitled to be reimbursed for costs directly associated with carrying out
their duties, including travel costs. Directors can receive special exertion payments in certain circumstances – none were paid in FY26.
Board policy is that no sum is paid to a director upon retirement or cessation of office. Directors do not participate in the company's
short or long term incentives.
In FY26, directors volunteered a temporary 20% fee reduction from 1 July 2025 to 30 September 2025. The total amount of
remuneration and other benefits received by the directors during the year ended 30 June 2026 was $549,925 as shown in the
table below:
DirectorDirector Fees
Committee
Chair FeesF Y 2 6 To t a lResponsibility
Susan Paterson156,750-156,750Board Chair
Steve Reindler83,1259, 5 0 092,625People & Culture Committee Chair
Chris Ellis83,12514,2509 7, 3 7 5QHSET Committee Chair
Karen Jordan83,12514,2509 7, 3 7 5Audit & Risk Committee Chair
Andrew Flavell83,125-83,125
John Beveridge*22,675-22,675
* John Beveridge ceased to be a director on 22 October 2025, hence directors’ fees paid to him in FY26 are pro-rated up to cessation date
Executive Remuneration
Steel & Tube’s remuneration practices are designed to attract, retain and motivate high calibre people at all levels of Steel & Tube.
Roles are benchmarked using recognised job sizing comparison processes. Board policy is that no additional amounts are paid to
a director or the Chief Executive Officer upon retirement or cessation of office. There were no special joining payments, retention
payments or takeover bonuses paid to the Chief Executive in FY26.
Executive remuneration comprises fixed base salary and superannuation. Both elements make up Fixed Annual Remuneration (FAR),
against which discretionary performance incentives are applied.
Steel & Tube operates a Short Term Incentive (STI) and Long Term Incentive (LTI) scheme. They are both variable elements of
remuneration, with selected employees invited to participate as approved by the board. They are only paid if conditions and targets
are met. Due to market conditions no STI scheme was in place in FY26.
Short Term Incentive (STI)
The CEO and executives have the potential to earn a Short Term Incentive (STI) Steel & Tube’s STI is based on performance targets and
is designed to differentiate performance and reward delivery. STI values for the CEO and executives are set as a percentage of Fixed
Annual Remuneration (FAR) based on the scale, complexity and performance expectations of each individual STI participant’s role.
STI performance targets for all participants including the CEO are based on the following criteria:
Portion of STICriteria
50%*Financial Results (Return on Funds Employed target)
25%Execution against nominated mid-longer term strategic initiatives in board approved Strategic Initiative Plan.
This plan details key operational excellence improvements with milestones to be completed during FY26
10%QHSET Leadership requiring 100% completion of leadership safety observations throughout the year
8%Customer Engagement NPS
7%Employee Engagement ENPS
*(participants can achieve maximum of 150% of target STI for outperformance of financial targets)
REMUNERATION
93Steel & Tube Annual Report 2026
Other features of the STI
1. The STI plan includes a company based financial performance hurdle, i.e. no STI is payable to any participant if the year-end
results are less than 80% of the company’s financial target.
2. If financial results are within 80-99% of target, participants may achieve a maximum of 50% STI based on the achievement of the
non-financial components of the targets.
3. The scheme enables a maximum payment of up to 150% STI for stretch performance – achievable only by exceeding the Return
on Funds Employed target. There is no outperformance incentive of the non-financial components. If there is a fatality or
serious harm where the board deems either the company as a whole or participating individuals are culpable, the board may
decide that no STI payment (all components) will be paid to one, some or all of the participants.
Long Term Incentive Scheme (LTI)
The CEO and executives, together with a limited number of non-executive senior managers, also have the potential to earn a Long
Term Incentive (LTI). Steel & Tube’s LTI is designed to incentivise and retain key personnel, align the interests of executives and
shareholders and encourage long-term decision-making. LTI values for the CEO and executives are set as a percentage of FAR.
The current LTI (referred to as the Performance Rights Plan (PRP)) was developed and approved by the board in February 2018.
The PRP performance period runs for three years and comprises of two performance conditions (50% each) as outlined in Note E5
of the Financial Report.
CEO Remuneration
The CEO’s overall remuneration as at 30 June 2026 consists of a fixed annual remuneration (FAR), an STI at 60% of FAR and an LTI of
40% of FAR. This is reviewed annually by the People & Culture Committee and approved by the board each year.
The performance targets for the CEO for the year ending 30 June 2026 were aligned with the STI scheme and were as follows:
Ta r g e t K P I sWeighting
Financial – Return on Funds Employed (ROFE)50%
Completion of Nominated Strategic Initiatives25%
Health & Safety – Leading and lagging indicators10%
Customer Engagement8%
Employee Engagement7%
The board ensures that the CEO’s remuneration, including base salary, is aligned with appropriate market rates and reflects
performance and delivery of sustainable shareholder value.
The table below sets out CEO FAR and the pay for performance components of the CEO’s remuneration package on an annualised
basis. This table sets out the pay for performance outcomes for STI and LTI assuming 100% is paid out.
94Steel & Tube Annual Report 2026
Target Remuneration (as at 30 June):
Fixed RemunerationPay for Performance
Total Target
RemunerationFAR¹
Non-taxable
benefits
2
Sub totalTarget STI
�
Ta r g e t
LTI Value
4
No. of LTI
Performance
Rights*Subtotal
2026$1,106,344nil$1,106,344$663,807$442,537649,989$1,106,344$2,212,688
2025$1,104,982nil$1,104,982$662,989$ 4 41,9 9 34 41,9 9 3$1,104,982$ 2 , 2 0 9,96 4
2024$1,083,316nil$1,083,316$ 6 49,9 9 0$433,3263 6 7, 2 2 6$1,083,316$2,166,632
2023$875,500nil$875,500$525,300$350,2002 2 7, 4 0 3$875,500$1,751,000
2022$875,500nil$875,500$458,556$ 4 0 9,13 8365,302$ 8 6 7, 6 9 4$1,743,194
* Each Issue of LTI Performance Rights has a 3 year hurdle in accordance with the terms of the LTI scheme
The financial performance target for the full year to 30 June 2026 was below the scheme’s 80% hurdle requirement and accordingly
no STI is payable to the CEO (or other participants).
Company Performance and CEO Remuneration Outcomes
FY26FY25FY24FY23FY22
ROFE(5.3)%(6.7)%4.8%9.9 %14.6%
STI AwardNoNoNoYe sYe s
% of STI paid in respect---110%150%
LT I A w a r dNoYe sYe sYe sNo
Portion of Rights Vested-50%100%100%-
No. of Shares Vested-182,651487,788328,012-
Details of what has been paid to the CEO in the past five years are outlined below:
Actual Remuneration Earned (for the financial year ended):
FAR¹
Non-taxable
benefits
2
STI earned in FY
3
Value of LTI
vested during FY
4
Total remuneration
earned during FY
FY26$1,029,726nilnilnil$1,029,726
FY25$ 1,0 69, 2 9 2nilnil$ 1 7 7, 4 1 3$1,246,705
FY24$1,048,680nilnil$516,490$1,565,170
FY23$875,500nil$708,871$422,321$2,006,692
FY22$794,786nil$ 6 8 7, 8 3 4nil$1,482,620
1
FAR includes any KiwiSaver employer contributions
2
There were no costs associated with any other benefits during the year ended 30 June 2026
3
STI target for the full year is subject to achievement of performance targets as agreed with the board in each year. No STI was payable in FY26 as financial threshold was not
achieved
4
LTI value of actual Rights granted in each year (which may be exercised after the completion of the three year performance period, providing and only to the extent that the
performance conditions have been satisfied)
95Steel & Tube Annual Report 2026
Pay Gap
The Pay Gap represents the number of times greater the CEO's remuneration is to the remuneration of an employee paid at the
median of all Steel & Tube employees. For the purposes of determining the median paid to all Steel & Tube employees, all permanent
full-time, permanent part-time and fixed-term employees are included, with part-time employee remuneration adjusted to a full-time
equivalent amount.
At 30 June 2026, the CEO's remuneration of $1,029,726 was 13.4 times (30 June 2025: 15.3 times) that of the median employee at
$76,728 per annum.
Employee Remuneration
The number of employees or former employees who received remuneration and other benefits valued at or exceeding $100,000
during the year to 30 June 2026 are specified in the table below.
The remuneration noted includes all monetary payments actually paid during the course of the year ended 30 June 2026, any
restructuring and redundancy related compensation, value of shares vested under the terms of the long term incentive scheme and
all short term performance incentive payments.
The remuneration paid to, and other benefits received by, the CEO for the year ended 30 June 2026 are detailed on page 95 and are
excluded from the table.
Remuneration Range $0002026
100 - 11039
110 - 12035
120 - 13024
130 - 14013
140 - 15011
150 - 16015
160 - 1706
170 - 18013
180 - 1904
190 - 2002
200 - 2105
210 - 2201
220 - 2302
230 - 2401
240 - 2501
250 - 2602
300 - 3101
320 - 3301
340 - 3503
380 - 3901
390 - 4001
400 - 4101
440 - 4501
To t a l183
96Steel & Tube Annual Report 2026
Directors’ Interests
Directors have made general disclosures of interests in accordance with section 140(2) of the Companies Act 1993. Current interests as
at 30 June 2026, including those which ceased during the year, are detailed below:
Susan Paterson
Theta Systems Ltd Chair
EROAD Ltd Director
Reserve Bank of New Zealand
Governance Board
Board Member
Les Mills Holdings LtdDirector
Lodestone Energy Limited Director
Steve Reindler
Broome International Airport Group &
affiliates
Director
Te Kaha Project Delivery Limited Director
Port of Auckland Limited Director
Whitford Community Charitable Trust
1
Trustee
Museum of NZ Te Papa Tongarewa
Governance Group
Independent
Advisor
Westland District Council CCO Oversight
Committee
1
Chair
Andrew Flavell
ASB Technical Advisory Group Member
Port of Auckland Limited Director
Les Mills International
Fractional CTO
Chris Ellis
Ingot Holdco Limited & affiliates Chair
Disputes Review Board – Central
Interceptor Project
Chair
Oxcon CLL LimitedAdvisory Chair
John Fillmore Contracting LimitedAdvisory Chair
Titan Contracting Group Limited
Advisory Chair
Horizon Energy Distribution Limited &
affiliates
Director
Karen Jordan
Lyttelton Port Company Limited Director
New Zealand Defence Force (NZDF) Risk
and Assurance Committee
1
Member
DISCLOSURES
1
Interest no longer held as at 30 June 2026
97Steel & Tube Annual Report 2026
Information Used by Directors
There were no notices from directors requesting to disclose or use company information received in their capacity as directors that
would not otherwise have been available to them.
Directors’ Shareholdings
Steel & Tube securities in which each director has a relevant interest as at 30 June 2026 are:
DirectorShares held
Susan Paterson262,425 beneficially owned
Steve Reindler115,177 beneficially owned
Chris Ellis20,197
Karen Jordan10,000
Andrew Flavell1,000
Directors’ Security Dealings
During the year ended 30 June 2026 directors’ disclosed the following securities transactions in respect of section 148(2) of the
Companies Act 1993 and sections 297(2) and 298(2) of the Financial Markets Conduct Act 2013.
These transactions took place in accordance with Steel & Tube’s Insider Trading Policy.
DirectorDate of Transaction
Number of shares
acquired / (disposed)Nature of transactionConsideration
John Beveridge27 November 2025(20,000)On-market disposal$12,726
Indemnities and Insurance
In accordance with section 162 of the Companies Act 1993 and Steel & Tube’s Constitution, the company has arranged Directors and
Officers Liability insurance covering directors and employees of Steel & Tube, including directors of subsidiary companies, for liability
arising from their acts or omissions in their capacity as directors or employees. The insurance policy does not cover dishonest,
fraudulent, malicious or willful acts or omissions.
Subsidiary Companies Directors
The remuneration of employees appointed as directors of subsidiary companies is disclosed in the relevant banding of remuneration
set out under the heading Employee Remuneration. Employees did not receive additional remuneration or benefits for being
directors during the year.
98Steel & Tube Annual Report 2026
Directors of the subsidiary companies as at 30 June 2026 were:
CompanyDirectors
Steel & Tube Galvanising LimitedMark Malpass, Richard Smyth
Composite Floor Decks Holdings LimitedMark Malpass, Richard Smyth
Studwelders LimitedMark Malpass, Richard Smyth
S & T Stainless LimitedMark Malpass, Richard Smyth
Manufacturing Suppliers LimitedMark Malpass, Richard Smyth
S & T Plastics LimitedMark Malpass, Richard Smyth
Composite Floor Decks LimitedMark Malpass, Richard Smyth
Steel & Tube Holdings Limited (STU) Analysis Of Shareholding
As at 30 June 2026
Holding RangeHolder CountHolder Count %Holding QuantityHolding Quantity %
1 to 9991,36721.87%5 4 4,9 940.30%
1,000 to 4,9992,0463 2.74%4, 8 76 ,9 952.66%
5,000 to 9,99992514.80%6,346,9843.46%
10,000 to 49,9991,44523.12%29,817,30616. 24%
50,000+4677.47%142,045,7567 7. 3 5 %
To t a l6,250100.00%183,632,035100.00%
Substantial Security Holder
The company received no substantial security holders notices during the year.
Issued shares in the company at 30 June 2026 comprise:
Ordinary shares fully paid183,632,035
183,632,035
99Steel & Tube Annual Report 2026
Top 20 Shareholders
As at 30 June 2026
Twenty largest security holders as at 30 June 2026
Ordinary
SharesPercentage
New Zealand Steel Limited26,274,75314.31%
Perry Group Ltd15,476,7558.43%
Lennon Holdings Limited9,581,5935.22%
New Zealand Depository Nominee Limited6,484,2233.53%
Accident Compensation Corporation*5,191,4552.83%
Custodial Services Limited3,074, 2981.67%
HPI Avondale Limited2,103,7861.15%
Forsyth Barr Custodians Limited2,023,8851.10%
Neil Douglas Waites & Anthony Gene Waites & Richard Boyd Waites1,770,0000.96%
FNZ Custodians Limited1,600,5120.87%
John Francis Managh1, 5 59,0140.85%
Leveraged Equities Finance Limited1,462,5580.80%
Andrew Paul Lissaman Everist1,296,9980.71%
Trevor Jeffrey Corfield1,054,7000.57%
John Francis Managh & Jonathan Peter Managh999,4540.54%
Citibank Nominees (New Zealand) Limited*991,0240.54%
GMH 38 Investments Limited700,0000.38%
ASB Nominees Limited*696,8190.38%
Public Trust Class 10 Nominees Limited*6 8 7,9 4 20.37%
Brian Robert Hardgrave620,0000.34%
83,649,76945.55%
* Shares held in New Zealand Central Securities Depository (NZCSD)
100Steel & Tube Annual Report 2026
Glossary
E B I T: Earnings / (Loss) before the deduction of interest and tax
EBITDA: Earnings / (Loss) before the deduction of interest, tax,
depreciation and amortisation
TRIFR: Employee Total Recordable Injury Frequency Rate per
1 million work hours
ISO: International Organization for Standardization
Normalised EBIT/EBITDA: EBIT and EBITDA excluding non-
trading adjustments and unusual transactions
N PAT: Net profit after tax
XRB: External Reporting Board
Registered Office
7 Bruce Roderick Drive, East Tamaki,
Auckland 2013, New Zealand
PO Box 58880, Botany, Auckland 2163,
New Zealand
Ph: +64 4 570 5000
Email: info@steelandtube.co.nz
Website: www.steelandtube.co.nz
Directors
Susan Paterson Chair and Independent Director
Steve Reindler Independent Director
Christopher Ellis Independent Director
Karen Jordan Independent Director
Andrew Flavell Independent Director
Auditor
KPMG Auckland
18 Viaduct Harbour Avenue, Auckland 1010
Share Registry
Computershare Investor Services Limited
Private Bag 92119, Auckland 1142, New Zealand
Ph: +64 9 488 8777 Fax: +64 9 488 8787
Email: enquiry@computershare.co.nz
Website: w w w.computershare.co.nz
Bankers
ANZ New Zealand
ANZ Centre, 23-29 Albert Street, Auckland 1010
Solicitors
Chapman Tripp Auckland
Level 34, PwC Tower, 15 Customs Street West
PO Box 2206, Auckland 1140
Financial Calendar
Half year results announced February
End of financial year 30 June
Annual results announced August
Annual report August
Stock Exchange
The company’s shares trade on the New Zealand Exchange
under the code STU
Directory
101Steel & Tube Annual Report 2026
STRONGER
TOGETHER
Data sourced from publicly available filings. Our datasets may not be complete. Automated analysis can produce errors. If you believe any data on this page is incorrect, please contact us at hello@nzxplorer.co.nz. For informational purposes only. Not investment advice.