What did Manuka Resources Limited announce?

Manuka Resources Limited (NZX: MKR) filed “High Grade Gold Drill Intersections from Pipeline Ridge” with NZX on 9 September 2026, as an operational update announcement.

From the announcement:“Executive Chairman Dennis Karp said: “These are exceptionally encouraging results from shallow RC drilling at our Pipeline Ridge project and confirm the potential to generate future gold resources for treatment either at Wonawinta or Mt Boppy.”
When was it filed?
9 September 2026
Where is the original?
NZX announcement
Manuka Resources Limited logo

High Grade Gold Drill Intersections from Pipeline Ridge

Operational Update9 September 2026MKRMaterials

ASX Announcement
10 September 2026


ASX: MKR




Manuka Resources Limited - Level 4 Grafton Bond Building, 201 Kent St Sydney NSW Australia 2000

ABN 80 611 963 225 Tel 02 7253 2020 www.manukaresources.com.au

OUTSTANDING GOLD DRILL INTERSECTIONS FROM THE

PIPELINE RIDGE PROJECT

Including 32m at 7.98g/t Au from 34 metres


Highlights

• Manuka Resources has received high-grade gold assays from its initial Pipeline

Ridge RC drilling programme

• The assays received are from the completed 56-hole, 3,133 m RC drilling

programme at Pipeline Ridge

• Selected shallow high-grade gold drill intersections include:

PRRC054: 32m @ 7.98 g/t Au from 34 m

PRRC007: 8m @ 12.96 g/t Au from 37m

PRRC035: 5m @ 8.59 g/t Au from 37m

PRRC008: 10m @ 2.89 g/t Au from 24m

• Historic and current drilling indicates that the Pipeline gold mineralised zones

are open in all directions, including at depth, across section to the east and west

and along strike both to the north and the south

• First pass Pipeline Ridge gold mineral resource estimation will now be

undertaken based on these positive drill results

• Manuka’s exploration results support future gold resource growth alongside

near-term production restart now underway at Wonawinta

• Further drilling is planned for October 2026 to test extensions at depth, across

section and along strike

Manuka Resources Limited (“Manuka” or the “Company”) is pleased to report high-grade assay

results from its recently completed drilling programme at the Pipeline Ridge Project, located

28km south of Canbelego (and the Mt Boppy Gold Mine site; Figure 1) within its Cobar Basin

operations.


The drilling has returned multiple high-grade, shallow gold intersections across the Pipeline

Ridge prospect, validating the northern and southern zones of mineralisation targeted by the

program. Mineralisation remains open at depth, across section and along strike to both the north

and south.


Importantly, Pipeline Ridge is being evaluated as a potential future satellite gold deposit within

trucking distance of Manuka’s Wonawinta processing facility (120km away), where gold

processing has recently recommenced using Mt Boppy ore. Pipeline Ridge therefore has the

potential to provide an additional source of gold feed as Manuka builds a broader, multi-source

precious metals production platform across its Cobar Basin assets.


Receipt of these gold drill assays enables Manuka to commence its maiden Mineral Resource

Estimate (“MRE”) for Pipeline Ridge, subject to completion of modelling, validation and

Competent Person review planned for release in 2026. Further drilling is now planned to




Page | 2


Manuka Resources Limited - Level 4 Grafton Bond Building, 201 Kent St Sydney NSW Australia 2000

ABN 80 611 963 225 Tel 02 7253 2020 www.manukaresources.com.au

commence in October 2026 to test extensions of the mineralisation at depth, across section and

along strike.

Executive Chairman Dennis Karp said:

“These are exceptionally encouraging results from shallow RC drilling at our Pipeline Ridge

project and confirm the potential to generate future gold resources for treatment either at

Wonawinta or Mt Boppy.


Importantly, this precious and base metal exploration is being undertaken alongside

Manuka’s production restart, which will deliver first revenues from the processing of Mt

Boppy gold bearing stockpiles this quarter.

1



Our confidence remains that Mt Boppy sits within a larger mineralised system consistent

with Manuka’s broader Cobar Basin Project. Pipeline Ridge, which is located just 28km

south of Mt Boppy, appears to be confirming this conviction.


Manuka plans to release a maiden resource estimate (MRE) for Pipeline Ridge in 2026

which will be an exciting step towards adding to its future gold resources and production

profile. Further drilling is planned for Pipeline Ridge later in October 2026.”


Project Background


Pipeline Ridge is located 28km south of Canbelego (and the Mt Boppy Gold Mine site; Figure

1) and has attracted historic exploration dating back to the 1970’s. Pipeline Ridge is a

polymetallic Cu-Pb-Zn and Au deposit with volcanic massive sulphide (“VMS”) affinities. The

current drilling has targeted a later stage phase of gold mineralisation that appears mostly

controlled by brecciation within volcanic tuff host rocks. Historic drilling (Table 1) has tested

both base metal and gold mineralization, and totals 195 drillholes for 13,237m.



Figure 1 Locality of Pipeline Ridge




1

ASX Announcement: Gold Production Restarts at Wonawinta 21 August 2026




Page | 3


Manuka Resources Limited - Level 4 Grafton Bond Building, 201 Kent St Sydney NSW Australia 2000

ABN 80 611 963 225 Tel 02 7253 2020 www.manukaresources.com.au



Table 1: Pipeline Ridge historical drilling






The locality of these drilling collars is shown in Figure 2, and comprises


- 72 Rotary Air Blast (“RAB”), Aircore (“AC”) and Percussion (“PC”) drillholes for 3,071m;

- 94 Reverse Circulation Percussion (“RC”) drillholes for 4,240m; and

- 29 Diamond (“DD”) drillholes for 5,926m.

The current drilling has involved 56 RC drillholes for 3,133m, along 17 heel-toe lines (Figure 2).

The prime focus of the drilling has been validation and infill of historic drilling, and delineation of

mineral resources over a zone striking 350m to a depth of 60m.





















Page | 4


Manuka Resources Limited - Level 4 Grafton Bond Building, 201 Kent St Sydney NSW Australia 2000

ABN 80 611 963 225 Tel 02 7253 2020 www.manukaresources.com.au



Figure 2: Historic and current collar location for MKR Pipeline Ridge drilling with indicated g/t x

m gold (g/t Au) content.







The RC drillholes were sampled each metre, and Fire Assays (50g) completed at SGS Orange

Laboratory. Collar information, assay intersections using a 0.25g/t Au cut-off and representative

cross sections are given in Annexure 2. Highlighted intersections with Au content greater than 10

g/t x m Au are shown below in Table 2.








Page | 5


Manuka Resources Limited - Level 4 Grafton Bond Building, 201 Kent St Sydney NSW Australia 2000

ABN 80 611 963 225 Tel 02 7253 2020 www.manukaresources.com.au



Table 2: Pipeline Ridge highlighted intersections




The current drilling programme has validated the northern and southern target zones of gold

endowment, as well as demonstrating that the mineralised zone is open in all directions, including

at depth, across section and both to the north and south. A second phase of RC and diamond drilling

is planned which will test both the near surface extensions to 100m depth, (potentially, subject a

MRE being completed, supporting a 100m open cut) as well as along strike north and south of the

current drilling.


Future exploration and assessments at Pipeline Ridge will involve:


- more detailed analysis and construction of a geological model, an alteration model

based on pXRF analyses on each metre drilled, progressing to block modelling and

mineral resource estimation;

- bottle roll testwork of a suite of samples, which will give indicative estimations of the

amenability of the mineralisation to cyanide leaching; and

- six diamond core drillholes are also scheduled to enable collection of representative

material for diagnostic leach metallurgical testwork; and

RC drill samples to undergo hyperspectral scanning at the NSW Geology unit at Londonderry,

which will provide mineralogical data to be integrated with the pXRF multielement database and

support the MRE.







Page | 6


Manuka Resources Limited - Level 4 Grafton Bond Building, 201 Kent St Sydney NSW Australia 2000

ABN 80 611 963 225 Tel 02 7253 2020 www.manukaresources.com.au

Strategic Context

While Manuka’s immediate focus remains on the restart of precious metals production at its

Wonawinta processing plant in Q3 2026, the current exploration programmes are directed

towards building out a broader Cobar Basin Project production platform.

The Company’s strategy is underpinned by a 10-year production plan, centred on the

Wonawinta processing facility and incorporating multiple gold and silver feed sources across its

regional asset base.

2

This approach is focused on:

• increasing near-term gold feed into the plant;

• extending Wonawinta silver mine life beyond the current plan;

• identifying additional satellite gold and silver deposits and resources within trucking

distance of Wonawinta and or commissioning a gold treatment facility at Mt Boppy.

Successful exploration could increase future operating flexibility. There is no certainty that

exploration will result in a Mineral Resource or future mining operation.



This announcement has been approved for release by the Board of Directors of Manuka

Resources Limited



For further information contact:


Dennis Karp

Executive Chairman

Manuka Resources Limited

Tel. 02 7253 2020

admin@manukaresources.com.au


Compliance Statements

The information in this announcement that relates to previously reported Exploration Results, Exploration

Targets, Mineral Resources, Ore Reserves, Production Targets and Financial Forecasts is extracted from

the Company’s ASX announcements and are available to view on the Company’s website. The Company

confirms that in the case of estimates of Mineral Resources and Ore Reserves, that all material

assumptions and technical parameters underpinning the estimates in the relevant announcement

continue to apply and have not materially changed. The Company confirms that the form and context in

which the Competent Person’s findings are presented have not been materially altered.


Important Information

This report includes forward-looking statements and comments about future events, including the

Company’s expectations about the performance of its businesses. Forward-looking words such as

“expect”, “should”, “could”, “may”, “predict”, “plan”, “will”, “believe”, “forecast”, “estimate”, “target” or other

similar expressions are intended to identify forward-looking statements. Such statements involve known

and unknown risks, uncertainties, assumptions and other important factors, many of which are beyond

the control of the Company, and which may cause actual results, performance or achievements to differ


2

ASX Announcement of 23 March 2026




Page | 7


Manuka Resources Limited - Level 4 Grafton Bond Building, 201 Kent St Sydney NSW Australia 2000

ABN 80 611 963 225 Tel 02 7253 2020 www.manukaresources.com.au

materially from those expressed or implied by such statements. Forward-looking statements are provided

as a general guide only and should not be relied on as an indication or guarantee of future performance.

Given these uncertainties, recipients are cautioned to not place undue reliance on any forward-looking

statement. Subject to any continuing obligations under applicable law, the Company disclaims any

obligation or undertaking to disseminate any updates or revisions to any forward-looking statements in

this report to reflect any change in expectations in relation to any forward-looking statements or any

change in events, conditions or circumstances on which any such statement is based. No Limited Party

or any other person makes any representation or gives any assurance or guarantee that the occurrence

of the events expressed or implied in any forward-looking statements in the report will occur.



Competent Person

The information in this report that relates to Pipeline Ridge exploration drilling and exploration targets is

based on, and fairly represents, information and supporting documentation prepared by Mr Philip Bentley,

who is a Certified Professional by The South African Council for Natural Sciences (SACNASP #

400208/05 ) and is the Chief Geologist employed by Manuka Resources Ltd. Mr Bentley has sufficient

experience which is relevant to the style of mineralisation and type of deposit under consideration and to

the activity which he is undertaking to qualify as a Competent Person as defined in the 2012 Edition of

the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’. Mr

Bentley consents to the inclusion in the statement of the matters based on his information in the form and

context in which it appears




ANNEXURE 1 – JORC 2012 TABLE 1

SECTION 1: SAMPLING TECHNIQUES AND DATA


Criteria JORC Code Explanation Commentary

Sampling

techniques

• Nature and quality of sampling (e.g. cut channels, random

chips, or specific specialised industry standard

measurement tools appropriate to the minerals under

investigation, such as down hole gamma sondes, or

handheld XRF instruments, etc.). These examples should

not be taken as limiting the broad meaning of sampling.

• Include reference to measures taken to ensure sample

representivity and the appropriate calibration of any

measurement tools or systems used.

• Aspects of the determination of mineralisation that are

Material to the Public Report.

• In cases where ‘industry standard’ work has been done this

would be relatively simple (e.g. ‘reverse circulation drilling

was used to obtain 1 m samples from which 3 kg was

pulverised to produce a 30 g charge for fire assay’). In

other cases more explanation may be required, such as

where there is coarse gold that has inherent sampling

problems. Unusual commodities or mineralisation types

(e.g. submarine nodules) may warrant disclosure of

detailed

information.

• Diamond Drilling

• A portion of the data used for

exploration and evaluation of the

Pipeline Ridge project has been

gathered from diamond core. PQ,HQ

and NQ core sizes have been used

historically at the Pipeline Ridge

prospect. This core is geologically

logged and subsequently halved for

sampling.

• Reverse Circulation (RC) Drilling

• Drill cuttings are extracted on a one

metre basis from the RC return via

cyclone. Representivity of sampling is

achieved from either


- a 3-bag rotational sampler

• Approximately three kilograms of the

recovered material is bagged into calico

bags for analysis. Sample material is

submitted for gold analysis by 50g Fire

assay. pXRF measurements are taken

every metre drilled.

• Residual material may be retained on

the ground near the hole till evaluation

is complete. Composite samples may be

obtained from the residue material for




Page | 8


Manuka Resources Limited - Level 4 Grafton Bond Building, 201 Kent St Sydney NSW Australia 2000

ABN 80 611 963 225 Tel 02 7253 2020 www.manukaresources.com.au

initial analysis, with the split samples

remaining with the individual residual

piles until required for re-split analysis

or eventual disposal.


Drilling

techniques

• Drill type (e.g. core, reverse circulation, open-hole

hammer, rotary air blast, auger, Bangka, sonic, etc.) and

details (e.g. core diameter, triple or standard tube, depth of

diamond tails, face-sampling bit or other type, whether core

is oriented and if so, by what method, etc.).

• Method of recording and assessing core and chip sample

recoveries and results assessed.

• Measures taken to maximise sample recovery and ensure

representative nature of the samples.

• Diamond Drilling

• Diamond drilling involves the coring of

rock by a rotating diamond bit, which

cuts through rock and emplaces the

core in a variable 1.5-commonly 3m –

6m core barrel located immediately

behind the bit. The core barrel is

retrieved at the discretion of the driller

(e.g. depending on ground conditions)

or when it is full. The core can be

marked to provide orientation data of

bedding or structures etc. Double barrel

and triple tube (in difficult ground to

protect washout of core) core barrels

are used for diamond drilling.

• RC Drilling

• Down hole rock cuttings are generated

by a down-the-hole (DTH) rotating

hammer bit, which breaks and

pulverises the rock, which under high air

pressure is passed up the inner tube and

extracted from the RC return via

cyclone. Normally material is sampled

on a 1 metre basis (see above).

Drill sample

recovery

• Whether a relationship exists between sample recovery

and grade and whether sample bias may have occurred

due to preferential loss/gain of fine/coarse material.

• All geology input is logged and validated

by the relevant area geologists,

incorporated into this is assessment of

sample recovery. No defined

relationship exists between sample

recovery and grade. Nor has sample bias

due to preferential loss or gain of fine or

coarse material been noted.

Logging

• Whether core and chip samples have been geologically

and geotechnically logged to a level of detail to support

appropriate Mineral Resource estimation, mining studies

and metallurgical studies.

• Whether logging is qualitative or quantitative in nature.

Core (or costean, channel, etc.) photography.

• The total length and percentage of the relevant

intersections logged

• Manuka surface diamond drill-holes are

all orientated and have been logged in

detail for geology, veining, alteration,

mineralisation and orientated structure.

Core has been logged in enough detail

to allow for the relevant mineral

resource estimation techniques to be

employed.

• Surface core is photographed both wet

and dry. All photos are stored on the

Company’s servers, with the

photographs from each hole contained

within separate folders.

• RC chips are geologically logged.

• Logging is quantitative in nature.

• All holes are logged completely.

Sub-

sampling

techniques

and sample

preparation

• If core, whether cut or sawn and whether quarter, half or all

core taken.

• If non-core, whether riffled, tube sampled, rotary split, etc.

and whether sampled wet or dry.

• For all sample types, the nature, quality and appropriateness

of the sample preparation technique.

• Quality control procedures adopted for all sub-sampling

stages to maximise representivity of samples.

• Measures taken to ensure that the sampling is

representative of the in-situ material collected, including for

instance results for field duplicate/second-half sampling.

• Whether sample sizes are appropriate to the grain size of

the material being sampled.

• RC – Pulverised material is sampled from

either a 3 tier riffle splitter or 3 sample

rotating splitter (producing 3 - 5kg

sample). Samples are generally dry.

• Diamond Drilling - Half-core niche

samples, sub-set via geological features as

appropriate.

• Chips / core chips undergo total

preparation.

• Samples undergo fine pulverisation of the

entire sample by an LM5 type mill to

achieve a -75μm product prior to splitting.

• QA/QC is currently ensured during the sub-

sampling stages process via the use of the

systems of an independent NATA / ISO

accredited laboratory contractor.

• The sample size is considered appropriate




Page | 9


Manuka Resources Limited - Level 4 Grafton Bond Building, 201 Kent St Sydney NSW Australia 2000

ABN 80 611 963 225 Tel 02 7253 2020 www.manukaresources.com.au

for the grain size of the material being

sampled.

• The un-sampled half of diamond core is

retained for check sampling if required. For

RC chips

• regular field duplicates are collected

and analysed for significant variance to

primary results.

Quality of

assay data

and

laboratory

tests

• The nature, quality and appropriateness of the assaying

and laboratory procedures used and whether the

technique is considered partial or total.

• For geophysical tools, spectrometers, handheld XRF

instruments, etc., the parameters used in determining the

analysis including instrument make and model, reading

times, calibrations factors applied and their derivation,

etc.

• Nature of quality control procedures adopted (e.g.

standards, blanks, duplicates, external laboratory checks)

and whether acceptable levels of accuracy (i.e. lack of

bias) and precision have been established.

• Recent drilling was analysed by fire

assay and pXRF,

• The current drill programme will be

analysed by pXRF, and sample prep and

gold analyses by Fire assay analysis at

SGS Orange.

• All gold diamond drilling samples

submitted for assay include at least one

blank and one Certified Reference

Material ("CRM") per batch, plus one

CRM or blank every 20 samples. In the

case of samples with observed visible

gold mineralization, a coarse blank is

inserted after the visible gold

mineralization to serve as both a coarse

flush to prevent contamination of

subsequent samples and a test for gold

smearing from one sample to the next

which may have resulted from

inadequate cleaning of the crusher and

pulveriser. The lab is also required to

undertake a minimum of 1 in 20 wet

screens on pulverised samples to ensure

a minimum 85% passing at -75μm. No

significant QA/QC issues have arisen in

recent drilling results.

•

• Historical drilling has used a combination

of Fire Assay, and Aqua Regia / AAS

analysis.

• These assay methodologies are

appropriate for the resources under

evaluation.

Verification

of sampling

and

assaying

• The verification of significant intersections by either

independent or alternative company personnel.

• The use of twinned holes.

• Documentation of primary data, data entry

procedures, data verification, data storage (physical and

electronic) protocols.

• Discuss any adjustment to assay data.

• Currently no independent or alternative

verifications are available.

• There have been no twinned holes

drilled on the Pipeline Ridge projects.

• Primary data will be collected utilising

LogChief. The information is imported into

a Datashed5 (SQL database server) and

verified.

• All data used in the calculation of

resources and reserves are compiled in

databases which are overseen and

validated by senior geologists.

• No adjustments have been made to any

assay data.

Location of

data points

• Accuracy and quality of surveys used to locate drill holes

(collar and down-hole surveys), trenches, mine workings

and other locations used in Mineral Resource estimation.

• Specification of the grid system used.

• Quality and adequacy of topographic control.

• All data is spatially oriented by survey

controls via direct pickups by the

exploration team using either handheld

GPS or Differential GPS. Drillholes are all

surveyed downhole, deeper holes with a

Gyro tool if required, the majority with

single / multishot cameras.

• All drilling and resource estimation (if

applicable) is preferentially undertaken

in the UTM grid system at the various

sites.

• Topographic control is generated from a

combination of remote sensing methods

including Drone and LIDAR surveys and

ground-based surveys. This

methodology is adequate for the




Page | 10


Manuka Resources Limited - Level 4 Grafton Bond Building, 201 Kent St Sydney NSW Australia 2000

ABN 80 611 963 225 Tel 02 7253 2020 www.manukaresources.com.au

resources in question.

Data

spacing and

distribution

• Data spacing for reporting of Exploration Results.

• Whether the data spacing and distribution is sufficient to

establish the degree of geological and grade continuity

appropriate for the Mineral Resource and Ore Reserve

estimation procedure(s) and classifications applied.

• Whether sample compositing has been applied.

• Data spacing is variable dependent upon

the individual orebody under

consideration. A lengthy history of

mining has shown that this approach is

appropriate for the Mineral Resource

Estimation process and to allow for

appropriate classification of the

resources.

• In the first instance no compositing is

undertaken. If applied it is carried out

based upon the modal sample length of

each individual domain.

Orientation

of data in

relation to

geological

structure

• Whether the orientation of sampling achieves unbiased

sampling of possible structures and the extent to which

this is known, considering the deposit type.

• If the relationship between the drilling orientation and the

orientation of key mineralised structures is considered to

have introduced a sampling bias, this should be assessed

and reported if

• material.

• Drilling intersections are nominally

designed to be normal or close to normal

to the mineral zones as far as geological

controls allow.

• It is not considered that drilling

orientation has introduced an

appreciable sampling bias.

Sample

security

• The measures taken to ensure sample security.

• Manuka exploration samples are

assayed off-site, and samples are thus

delivered to a third-party transport

service, who in turn relay them to the

independent laboratory contractor.

Samples are stored securely until they

leave site.

Audits or

reviews

• The results of any audits or reviews of sampling techniques

and data

• Audits and reviews on sampling

techniques have been undertaken on

previous resource estimations for the Mt

Boppy mine, with no significant flaws.



SECTION 2: REPORTING OF EXPLORATION RESULTS

(Criteria listed in the preceding section also apply to this section.)


Criteria JORC Code Explanation Commentary

Mineral tenement and land

tenure status

• Type, reference name/number, location and ownership

including agreements or material issues with third parties

such as joint ventures, partnerships, overriding royalties,

native title interests, historical sites, wilderness or

national park and environmental settings.

• The security of the tenure held at the time of reporting along

with any known impediments to obtaining a licence to

operate in the area.

• The MKR tenements are held by Mt Boppy

Resources Pty Ltd., a wholly owned

subsidiary of Manuka Resources Ltd.

• The current drilling exploration targets

locate on EL 5842.

• Native title interests are recorded against EL

5842 in the Mt Boppy Mine area.

• There are no third-party royalties on EL

5842 at present.

• The tenure is currently in good standing.

• There are no known issues regarding security

of tenure.

• MKR operates in accordance with all

landholder access and environmental

conditions set down as conditions for

grant of the lease.

Exploration done by other

parties

• Acknowledgment and appraisal of exploration by other

parties

• Historic exploration is acknowledged by

Golden Cross, Homestake, CPMS, and

Polymetals.

Geology

• Deposit type, geological setting and style of mineralisation.


Pipeline Ridge

• The Pipeline Ridge Au-Cu-Pb-Zn deposit in

the Cobar District of central New South

Wales is contained within the Sarona

Downes tuff member of the Kopyje Shelf, 20

km southeast of the town of Canbelego. The




Page | 11


Manuka Resources Limited - Level 4 Grafton Bond Building, 201 Kent St Sydney NSW Australia 2000

ABN 80 611 963 225 Tel 02 7253 2020 www.manukaresources.com.au

subregional geological setting locates the

deposit adjacent to the Coonara Fault, which

is part of a north-northwest striking terrane

termed as the Canbelego-Mineral Hill

volcanic belt.

• The prospect is marked by extensive

hydrothermal alteration in the form of

sericitisation and chlorite alteration

emplaced on volcanics with an alkali-rich (A-

type) affinity. The deposit appears a

combination of an early Kuroko-style VMS

deposit associated with the initial eruption of

felsic volcanics in a marine environment,

with a later intermediate sulphidation

epithermal overprint, characterized by the

strong hydrothermal alteration with

chalcedonic, coliform and vuggy quartz

veining.

Drill hole Information

• A summary of all information material to the

understanding of the exploration results including a

tabulation of the following information for all Material

drill holes:

o easting and northing of the drill hole collar

o elevation or RL (Reduced Level – elevation above

sea level in metres) of the drill hole collar

o dip and azimuth of the hole

o down hole length and interception depth

o hole length.

• If the exclusion of this information is justified on the

basis that the information is not Material and this

exclusion does not detract from the understanding of

the report, the Competent Person should clearly

explain why this is the case.



• Provided in Annexure 3




Data aggregation methods

• In reporting Exploration Results, weighting averaging

techniques, maximum and/or minimum grade

truncations (e.g., cutting of high grades) and cut-off

grades are usually Material and should be stated.

• Where aggregate intercepts incorporate short lengths of

high-grade results and longer lengths of low-grade

results, the procedure used for such aggregation should

be stated and some typical examples of such

aggregations should be shown in detail.

• The assumptions used for any reporting of metal equivalent

values should be clearly stated.

• All results presented are length weighted.

• No high-grade cuts are used.

• Reported results contain no more than two

contiguous metres of internal dilution

below 0.25g/t.

• Results are reported above a variety of

gram / metre cut-offs dependent upon the

nature of the hole. Grade cut-offs if

applied are clearly stated in the relevant

tables.

• All reported intersections are downhole

lengths. True widths are not yet known..


Relationship between

mineralisation widths and

intercept lengths

• These relationships are particularly important in the

reporting of Exploration Results.

• If the geometry of the mineralisation with respect to the

drill hole angle is known, its nature should be reported.

• If it is not known and only the down hole lengths are

reported, there should be a clear statement to this effect

(e.g., ‘down hole length, true width not known’).

• Unless indicated to the contrary, all results

reported are downhole width.


Diagrams

• Appropriate maps and sections (with scales) and

tabulations of intercepts should be included for any

significant discovery being reported. These should

include, but not be limited to a plan view of

• drill hole collar locations and appropriate sectional views.

• Included in this press release

Balanced reporting

• Where comprehensive reporting of all Exploration Results

is not practicable, representative reporting of both low

and high grades and/or widths should be practiced to

avoid misleading reporting of Exploration Results.

• All material assay resultrs and holes without

significant intersections are reported in

Table 2 and Annexure 3.




Page | 12


Manuka Resources Limited - Level 4 Grafton Bond Building, 201 Kent St Sydney NSW Australia 2000

ABN 80 611 963 225 Tel 02 7253 2020 www.manukaresources.com.au

Other substantive

exploration data

• Other exploration data, if meaningful and material,

should be reported including (but not limited to):

geological observations; geophysical survey results;

geochemical survey results; bulk samples – size and

method of treatment; metallurgical test results; bulk

density, groundwater, geotechnical and rock

characteristics;

• potential deleterious or contaminating substances.

• There is no other substantive exploration

data associated with this release.

Further work

• The nature and scale of planned further work (e.g. tests

for lateral extensions or depth extensions or large-scale

step-out drilling).

• Diagrams clearly highlighting the areas of possible

extensions, including the main geological interpretations

and future drilling areas, provided this information is not

commercially sensitive.

• Ongoing surface exploration activities will

be undertaken to support continuing

mining and exploration activities at Mt

Boppy and potentially developing mining at

the Pipeline Ridge Project.





Page | 13


Manuka Resources Limited - Level 4 Grafton Bond Building, 201 Kent St Sydney NSW Australia 2000

ABN 80 611 963 225 Tel 02 7253 2020 www.manukaresources.com.au

ANNEXURE 2: Pipeline Ridge Gold Project


The Pipeline Ridge prospect is a volcanic massive sulphide (“VMS”) style deposit located

approximately 28km south of Mt Boppy. Evaluation of the various drilling campaigns (some were

for base metals and others gold) has delineated a structurally controlled zone of shallow gold

mineralisation.


Two zones of gold mineralisation (295m & 180m strike) locate within a larger ~1,000m strike

length with intersections occurring down to over 150m depth (Figure 3) have been delineated.

The Phase 1 drilling at Pipeline Ridge was designed to delineate shallow (60m deep) free-milling

gold oxide resource, subject to planned bottle-roll and diagnostic metallurgical leach testwork,

for potential open pit extraction, with Phase 2 drilling follow up evaluation of the cross section,

strike extensions deeper gold mineralisation.






(Left above) Pipeline Ridge phase 1 drill collars (Blue) with historical gold intersections

in relationship to north and south oxide open pit target zones. (Right above) View looking

north showing distribution of deeper gold mineralisation relative to shallow oxide target

zones

Pipeline Ridge Gold Project – Resource Definition Drilling

Resource definition drilling at the Pipeline Ridge gold project commenced on 24th April 2026,

targeting shallow oxide gold mineralisation suitable for open pit extraction. The drilling was

completed 17

th

May 2026, and complete drill sample gold assays were received 8 September

2026.

The Pipeline Ridge project is located approximately 28km south of the Mt Boppy gold mine

within the Company’s broader Cobar Basin footprint.

• Phase 1 3,133m RC drilling programme (to ~60m depth) completed

• Exploration target: 187kt–365kt @ 1.1–1.5g/t Au

3


• Objective to deliver a maiden MRE gold resource in 2026

The potential quantity and grade of this Exploration Target is conceptual in nature. There has been insufficient exploration to

estimate a Mineral Resource, and it is uncertain if further exploration will result in the estimation of a Mineral Resource.

Pipeline Ridge represents a near-term opportunity to supplement gold feed into the

Wonawinta processing plant.


3

ASX Announcement of 28 April 2026




Page | 14


Manuka Resources Limited - Level 4 Grafton Bond Building, 201 Kent St Sydney NSW Australia 2000

ABN 80 611 963 225 Tel 02 7253 2020 www.manukaresources.com.au


ANNEXURE 3: PIPELINE RIDGE DRILLHOLE FILES




Page | 15


Manuka Resources Limited - Level 4 Grafton Bond Building, 201 Kent St Sydney NSW Australia 2000

ABN 80 611 963 225 Tel 02 7253 2020 www.manukaresources.com.au




Page | 16


Manuka Resources Limited - Level 4 Grafton Bond Building, 201 Kent St Sydney NSW Australia 2000

ABN 80 611 963 225 Tel 02 7253 2020 www.manukaresources.com.au

Pipeline Ridge selected cross sections

Data sourced from publicly available filings. Our datasets may not be complete. Automated analysis can produce errors. If you believe any data on this page is incorrect, please contact us at hello@nzxplorer.co.nz. For informational purposes only. Not investment advice.